Difference between revisions of "Jetson/xcb-lite"

From eLinux.org
Jump to: navigation, search
(Spec list)
(Expansion board list)
Line 41: Line 41:
* '''SPI board'''  
* '''SPI board'''  
* ''' Dual CAN '''  For TX2 ONLY
* ''' Dual CAN '''  For TX2 ONLY
* '''DSPK board'''

Revision as of 18:50, 12 August 2019

top view
bottom view


The XCB-Lite TX1/2 carrier board is designed by DCDZ. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com

Spec list

  • MicroHDMI: HDMI type D
  • eDP: support 30pin or 40pin eDP cable
  • DSI: 40pin interface for connect LCD module
  • LED: one power LED, one GPIO controlled LED.
  • UART0,UART1,UART2, UART3: 5V or 3.3V TTL level UARTs
  • CAN for TX2
  • DMIC and DSPK for TX2
  • DC12V PWR IN: DC 5.5V ~ 17V input
  • Fan: Fan interface
  • Key: four push button
  • Micro USB: Micro USB-A/B
  • USB 3.0: USB 3.0 expansion header same as the PC motherboard
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO: ten 3.3V level GPIOs and two 1.8V GPIO, support expanding more GPIO
  • Charger: battery charger board interface and perform the "Auto-Power-On"
  • Auto-Power-On: support "Auto-Power-On".
  • Audio: audio card expansion
  • Micro SD: Molex microSD Memory Card Connector, Push-Push Type
  • Touch: Touch screen or CAN bus expansion
  • Dimensions: 3.4" x 2.5" (87mm x 63mm) board
  • Weight: 34.6g

Expansion board list

  • ADAS cameras
  • OV5640 M12 camera
  • OV5693 camera
  • IMX185 camera
  • HDMI to CSI2
  • SDI to CSI2
  • Sound card
  • 6cam board
  • GPIO board
  • SPI board
  • Dual CAN For TX2 ONLY
  • DSPK board