Difference between revisions of "Jetson/xcb-lite"

From eLinux.org
Jump to: navigation, search
(Created page with "== Summary == The [https://item.taobao.com/item.htm?id=544466081364 XCB-Lite] TX1 carrier board is designed by [https://dcac.taobao.com DCDZ]. Supply more interfaces in a sm...")
 
(Summary)
Line 1: Line 1:
 +
[[File:Xcb-lite-a01b-toprev-EN.png|thumbnail|top view]]
 +
[[File:Xcb-lite-a01b-bottomrev-EN.png|thumbnail|bottom view]]
 +
 
== Summary ==
 
== Summary ==
 +
The [https://item.taobao.com/item.htm?id=544466081364 XCB-Lite] TX1 carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small demention. Author's mail: zhang0801@139.com
  
The [https://item.taobao.com/item.htm?id=544466081364 XCB-Lite] TX1 carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small demention.
+
== Spec list ==
 
+
* '''Dimensions:''' 3.4" x 2.5" (87mm x 63mm) board
* miniHDMI: HDMI type c
+
* '''miniHDMI:''' HDMI type c
* eDP: support 30pin or 40pin eDP cable
+
* '''eDP: support''' 30pin or 40pin eDP cable
* UART0,UART1,UART2 : 5V or 3.3V TTL level UARTs
+
* '''UART0,UART1,UART2 :''' 5V or 3.3V TTL level UARTs
* DC12V PWR IN:DC 12V input
+
* '''DC12V PWR IN:''' DC 12V input
* Fan:Fan interface
+
* '''Fan:''' Fan interface
* Key:four push button
+
* '''Key:''' four push button
* Micro USB: Micro USB-A/B
+
* '''Micro USB:''' Micro USB-A/B
* USB 3.0: USB 3.0 expansion header same as the PC motherboard
+
* '''USB 3.0:''' USB 3.0 expansion header same as the PC motherboard
* Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
+
* '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45
* GPIO:3.3V level GPIO
+
* '''GPIO:''' 3.3V level GPIO
* Charger:battery charger board interface and perform the "Auto-Power-On"
+
* '''Charger:''' battery charger board interface and perform the "Auto-Power-On"
* Audio:audio card expansion  
+
* '''Audio:''' audio card expansion  
* Micro SD:Molex microSD Memory Card Connector, Push-Push Type
+
* '''Micro SD:''' Molex microSD Memory Card Connector, Push-Push Type
* Touch:Touch screen or CAN bus expansion  
+
* '''Touch:''' Touch screen or CAN bus expansion  
* CSI-XX:CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor
+
* '''CSI-XX:''' CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor

Revision as of 22:17, 22 February 2017

top view
bottom view

Summary

The XCB-Lite TX1 carrier board is designed by DCDZ. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com

Spec list

  • Dimensions: 3.4" x 2.5" (87mm x 63mm) board
  • miniHDMI: HDMI type c
  • eDP: support 30pin or 40pin eDP cable
  • UART0,UART1,UART2 : 5V or 3.3V TTL level UARTs
  • DC12V PWR IN: DC 12V input
  • Fan: Fan interface
  • Key: four push button
  • Micro USB: Micro USB-A/B
  • USB 3.0: USB 3.0 expansion header same as the PC motherboard
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO: 3.3V level GPIO
  • Charger: battery charger board interface and perform the "Auto-Power-On"
  • Audio: audio card expansion
  • Micro SD: Molex microSD Memory Card Connector, Push-Push Type
  • Touch: Touch screen or CAN bus expansion
  • CSI-XX: CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor