Difference between revisions of "Jetson/xcb-lite"
< Jetson
(→Spec list) |
(Add expansion board list) |
||
Line 3: | Line 3: | ||
== Summary == | == Summary == | ||
− | The [https://item.taobao.com/item.htm?id=544466081364 XCB-Lite] TX1 carrier board is designed by [https://dcac.taobao.com DCDZ]. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com | + | The [https://item.taobao.com/item.htm?id=544466081364 XCB-Lite] TX1/2 carrier board is designed by [https://dcac.taobao.com DCDZ]. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com |
== Spec list == | == Spec list == | ||
Line 28: | Line 28: | ||
* '''Dimensions:''' 3.4" x 2.5" (87mm x 63mm) board | * '''Dimensions:''' 3.4" x 2.5" (87mm x 63mm) board | ||
* '''Weight:''' 34.6g | * '''Weight:''' 34.6g | ||
+ | |||
+ | == Expansion board list == | ||
+ | * '''ADAS cameras''' | ||
+ | * ''' OV5640 M12 camera''' | ||
+ | * ''' OV5693 camera''' | ||
+ | * '''HDMI to CSI2''' | ||
+ | * ''' SDI to CSI2''' | ||
+ | * '''Sound card''' | ||
+ | * ''' Dual CAN ''' For TX2 ONLY |
Revision as of 21:04, 3 February 2018
Summary
The XCB-Lite TX1/2 carrier board is designed by DCDZ. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com
Spec list
- MicroHDMI: HDMI type D
- eDP: support 30pin or 40pin eDP cable
- DSI: 40pin interface for connect LCD module
- LED: one power LED, one GPIO controlled LED.
- UART0,UART1,UART2, UART3: 5V or 3.3V TTL level UARTs
- CAN for TX2
- DMIC and DSPK for TX2
- DC12V PWR IN: DC 12V input
- Fan: Fan interface
- Key: four push button
- Micro USB: Micro USB-A/B
- USB 3.0: USB 3.0 expansion header same as the PC motherboard
- Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
- GPIO: ten 3.3V level GPIOs and two 1.8V GPIO, support expanding more GPIO
- Charger: battery charger board interface and perform the "Auto-Power-On"
- Auto-Power-On: support "Auto-Power-On".
- Audio: audio card expansion
- Micro SD: Molex microSD Memory Card Connector, Push-Push Type
- Touch: Touch screen or CAN bus expansion
- CSI-XX: CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor
- Dimensions: 3.4" x 2.5" (87mm x 63mm) board
- Weight: 34.6g
Expansion board list
- ADAS cameras
- OV5640 M12 camera
- OV5693 camera
- HDMI to CSI2
- SDI to CSI2
- Sound card
- Dual CAN For TX2 ONLY