< Jetson
Revision as of 21:51, 22 February 2017 by Zjj2k (talk | contribs) (Created page with "== Summary == The [ XCB-Lite] TX1 carrier board is designed by [ DCDZ]. Supply more interfaces in a sm...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


The XCB-Lite TX1 carrier board is designed by DCDZ. Supply more interfaces in a small demention.

  • miniHDMI: HDMI type c
  • eDP: support 30pin or 40pin eDP cable
  • UART0,UART1,UART2 : 5V or 3.3V TTL level UARTs
  • DC12V PWR IN:DC 12V input
  • Fan:Fan interface
  • Key:four push button
  • Micro USB: Micro USB-A/B
  • USB 3.0: USB 3.0 expansion header same as the PC motherboard
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO:3.3V level GPIO
  • Charger:battery charger board interface and perform the "Auto-Power-On"
  • Audio:audio card expansion
  • Micro SD:Molex microSD Memory Card Connector, Push-Push Type
  • Touch:Touch screen or CAN bus expansion
  • CSI-XX:CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor