View source for Jetson Nano/ncb00

[[File:ncb00-a02toprev.jpg|thumbnail|top view]]
[[File:ncb00-a02botrev.jpg|thumbnail|bottom view]]

== Summary ==
The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small dimension. Author's mail: mrobot@139.com

== Spec list ==
* '''MicroHDMI:''' HDMI type D
* '''LED:''' one power LED, one GPIO controlled LED.
* '''UART0,UART1,UART2:''' 5V or 3.3V TTL level UARTs
* '''CAN for NX
* '''PWR IN:''' DC 7V ~ 26V input
* '''Fan:''' Fan interface
* '''Key:''' Recovery, Reset and Power button keys
* '''Micro USB:''' Micro USB-B. Can be power in
* '''USB 3.0:''' USB type C connector
* '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45
* '''GPIO:''' two 3.3V or 5V level GPIOs
* '''Auto-Power-On:''' support "Auto-Power-On".
* '''Micro SD:''' Molex microSD Memory Card Connector
* '''CSI-XX:''' CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with [[Jetson/xcb-lite| XCB-Lite carrier]]), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
* '''Dimensions:''' 3.4" x 2.0" (87mm x 51mm) board
* '''Weight:''' TBD
[

== Expansion board list ==
* ''' ADAS cameras (testing)''' 
* ''' OV5640  M12 camera''' 
* ''' OV5693 camera''' 
* ''' IMX185 camera''' 
* ''' IMX274 camera''' 
* ''' HDMI to CSI2''' 
* ''' HDMI4K to CSI2 (testing)''' 
* ''' SDI to CSI2''' 
* ''' CVBS to CSI2''' 
* ''' 6cam board''' 
* ''' SPI board'''