Difference between revisions of "Jetson Nano/ncb00"

From eLinux.org
Jump to: navigation, search
(Spec list of version B03A)
Line 5: Line 5:
 
The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small dimension. Author's mail: mrobot@139.com
 
The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small dimension. Author's mail: mrobot@139.com
  
== Spec list of version B03A ==
+
== Spec list of version B04 ==
 
* '''MicroHDMI:''' HDMI type D
 
* '''MicroHDMI:''' HDMI type D
 
* '''LED:''' one power red LED, one GPIO controlled green LED.
 
* '''LED:''' one power red LED, one GPIO controlled green LED.
* '''UART0,UART1,UART2:''' 5V or 3.3V TTL level UARTs
+
* '''UART0,UART1,UART2:''' 5V or 3.3V TTL level UARTs with 6pin GH1.25 connector
 
* '''CAN for NX
 
* '''CAN for NX
 
* '''PWR IN:''' DC 7V ~ 26V input
 
* '''PWR IN:''' DC 7V ~ 26V input
Line 15: Line 15:
 
* '''Micro USB:''' Micro USB-B. Can be power in
 
* '''Micro USB:''' Micro USB-B. Can be power in
 
* '''USB 3.0:''' USB type C connector
 
* '''USB 3.0:''' USB type C connector
* '''PCIE:''' PCIE x 1 FFC connector
+
* '''PCIe:''' PCIE x 1 FFC connector
 
* '''IMU:''' BMI160 on board (optinal), and compatiable with ISAAC
 
* '''IMU:''' BMI160 on board (optinal), and compatiable with ISAAC
 
* '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45
 
* '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45
* '''GPIO:''' two 3.3V or 5V level GPIOs
+
* '''GPIO:''' Six 3.3V or 5V level GPIOs
 
* '''Auto-Power-On:''' support "Auto-Power-On" and "Auto-Power-Off"
 
* '''Auto-Power-On:''' support "Auto-Power-On" and "Auto-Power-Off"
 
* '''Micro SD:''' Molex microSD Memory Card Connector
 
* '''Micro SD:''' Molex microSD Memory Card Connector

Revision as of 20:36, 9 November 2020

top view
bottom view

Summary

The NCB00 NANO/NX carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com

Spec list of version B04

  • MicroHDMI: HDMI type D
  • LED: one power red LED, one GPIO controlled green LED.
  • UART0,UART1,UART2: 5V or 3.3V TTL level UARTs with 6pin GH1.25 connector
  • CAN for NX
  • PWR IN: DC 7V ~ 26V input
  • Fan: Fan interface
  • Key: Recovery, Reset and Power button keys
  • Micro USB: Micro USB-B. Can be power in
  • USB 3.0: USB type C connector
  • PCIe: PCIE x 1 FFC connector
  • IMU: BMI160 on board (optinal), and compatiable with ISAAC
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO: Six 3.3V or 5V level GPIOs
  • Auto-Power-On: support "Auto-Power-On" and "Auto-Power-Off"
  • Micro SD: Molex microSD Memory Card Connector
  • CSI-XX: CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with XCB-Lite carrier), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
  • Dimensions: 3.43" x 1.97" (87mm x 50mm) board
  • Weight: 30g

[

Expansion board list

  • ADAS cameras (testing)
  • OV5640 M12 camera
  • OV5693 camera
  • IMX185 camera
  • IMX274 camera
  • HDMI to CSI2
  • HDMI4K to CSI2 (testing)
  • SDI to CSI2
  • CVBS to CSI2
  • 6cam board
  • SPI board