Difference between revisions of "Jetson Nano/ncb00"
(→Spec list) |
(→Spec list) |
||
| Line 5: | Line 5: | ||
The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ]. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com | The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ]. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com | ||
| − | == Spec list == | + | == Spec list of B03A == |
* '''MicroHDMI:''' HDMI type D | * '''MicroHDMI:''' HDMI type D | ||
* '''LED:''' one power LED, one GPIO controlled LED. | * '''LED:''' one power LED, one GPIO controlled LED. | ||
| Line 15: | Line 15: | ||
* '''Micro USB:''' Micro USB-B. Can be power in | * '''Micro USB:''' Micro USB-B. Can be power in | ||
* '''USB 3.0:''' USB type C connector | * '''USB 3.0:''' USB type C connector | ||
| + | * '''PCIE:''' PCIE x 1 FFC connector | ||
| + | * '''IMU:''' BMI160 on board (optinal), and compatiable with ISAAC | ||
* '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45 | * '''Gbe ethernet:''' expand the Gbe ethernet port by a little board width RJ45 | ||
* '''GPIO:''' two 3.3V or 5V level GPIOs | * '''GPIO:''' two 3.3V or 5V level GPIOs | ||
| − | * '''Auto-Power-On:''' support "Auto-Power-On" | + | * '''Auto-Power-On:''' support "Auto-Power-On" and "Auto-Power-Off" |
* '''Micro SD:''' Molex microSD Memory Card Connector | * '''Micro SD:''' Molex microSD Memory Card Connector | ||
* '''CSI-XX:''' CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with [[Jetson/xcb-lite| XCB-Lite carrier]]), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI) | * '''CSI-XX:''' CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with [[Jetson/xcb-lite| XCB-Lite carrier]]), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI) | ||
| − | * '''Dimensions:''' 3. | + | * '''Dimensions:''' 3.43" x 1.97" (87mm x 50mm) board |
| − | * '''Weight:''' | + | * '''Weight:''' 30g |
[ | [ | ||
Revision as of 00:26, 13 August 2020
Summary
The NCB00 NANO/NX carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com
Spec list of B03A
- MicroHDMI: HDMI type D
- LED: one power LED, one GPIO controlled LED.
- UART0,UART1,UART2: 5V or 3.3V TTL level UARTs
- CAN for NX
- PWR IN: DC 7V ~ 26V input
- Fan: Fan interface
- Key: Recovery, Reset and Power button keys
- Micro USB: Micro USB-B. Can be power in
- USB 3.0: USB type C connector
- PCIE: PCIE x 1 FFC connector
- IMU: BMI160 on board (optinal), and compatiable with ISAAC
- Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
- GPIO: two 3.3V or 5V level GPIOs
- Auto-Power-On: support "Auto-Power-On" and "Auto-Power-Off"
- Micro SD: Molex microSD Memory Card Connector
- CSI-XX: CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with XCB-Lite carrier), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
- Dimensions: 3.43" x 1.97" (87mm x 50mm) board
- Weight: 30g
[
Expansion board list
- ADAS cameras (testing)
- OV5640 M12 camera
- OV5693 camera
- IMX185 camera
- IMX274 camera
- HDMI to CSI2
- HDMI4K to CSI2 (testing)
- SDI to CSI2
- CVBS to CSI2
- 6cam board
- SPI board
