Difference between revisions of "Jetson Nano/ncb00"

Revision as of 01:27, 13 August 2020

top view

bottom view

The NCB00 NANO/NX carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com

MicroHDMI: HDMI type D
LED: one power LED, one GPIO controlled LED.
UART0,UART1,UART2: 5V or 3.3V TTL level UARTs
CAN for NX
PWR IN: DC 7V ~ 26V input
Fan: Fan interface
Key: Recovery, Reset and Power button keys
Micro USB: Micro USB-B. Can be power in
USB 3.0: USB type C connector
PCIE: PCIE x 1 FFC connector
IMU: BMI160 on board (optinal), and compatiable with ISAAC
Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
GPIO: two 3.3V or 5V level GPIOs
Auto-Power-On: support "Auto-Power-On" and "Auto-Power-Off"
Micro SD: Molex microSD Memory Card Connector
CSI-XX: CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with XCB-Lite carrier), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
Dimensions: 3.43" x 1.97" (87mm x 50mm) board
Weight: 30g

[

@@ Line 5: / Line 5: @@
 The [https://item.taobao.com/item.htm?ft=t&id=613984388047 NCB00] NANO/NX carrier board is designed by [https://dcac.taobao.com DCDZ].  Supply more interfaces in a small dimension. Author's mail: mrobot@139.com
-== Spec list of B03A ==
+== Spec list of version B03A ==
 * '''MicroHDMI:''' HDMI type D
 * '''LED:''' one power LED, one GPIO controlled LED.