Jetson Nano/ncb00

From eLinux.org
< Jetson Nano
Revision as of 06:30, 28 May 2020 by Zjj2k (talk | contribs) (Spec list)
Jump to: navigation, search
top view
bottom view

Summary

The NCB00 NANO/NX carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com

Spec list

  • MicroHDMI: HDMI type D
  • LED: one power LED, one GPIO controlled LED.
  • UART0,UART1,UART2: 5V or 3.3V TTL level UARTs
  • CAN for NX
  • PWR IN: DC 7V ~ 26V input
  • Fan: Fan interface
  • Key: Recovery, Reset and Power button keys
  • Micro USB: Micro USB-B. Can be power in
  • USB 3.0: USB type C connector
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO: two 3.3V or 5V level GPIOs
  • Auto-Power-On: support "Auto-Power-On".
  • Micro SD: Molex microSD Memory Card Connector
  • CSI-XX: CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with XCB-Lite carrier), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
  • Dimensions: 3.4" x 2.0" (87mm x 51mm) board
  • Weight: TBD

[

Expansion board list

  • ADAS cameras (testing)
  • OV5640 M12 camera
  • OV5693 camera
  • IMX185 camera
  • IMX274 camera
  • HDMI to CSI2
  • HDMI4K to CSI2 (testing)
  • SDI to CSI2
  • CVBS to CSI2
  • 6cam board
  • SPI board