Difference between revisions of "Jetson TX2/28 Display debug"

From eLinux.org
Jump to: navigation, search
Line 12: Line 12:
 
  sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
 
  sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
 
* Forcing edid  
 
* Forcing edid  
**Method 1 Driver
 
 
# Prepare a known 256byte EDID.
 
# Prepare a known 256byte EDID.
 
# set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
 
# set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
 
# fill in the known EDID to default_720p_edid[256].
 
# fill in the known EDID to default_720p_edid[256].
 +
  
  

Revision as of 23:47, 8 January 2018

Get prepared

This section focuses on debug display driver issue on rel-28.x release.
Drivers of tegra display controller are under kernel source: https://developer.nvidia.com/embedded/downloads
Location:
For T210(TX1)
kernel/display/drivers/video/tegra/dc/
For T186(TX2). Note that TX2 still uses driver code of T210.
kernel/t18x/drivers/video/tegra/dc

Tips

  • Capture edid
sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
  • Forcing edid
  1. Prepare a known 256byte EDID.
  2. set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
  3. fill in the known EDID to default_720p_edid[256].



Known issues