Difference between revisions of "Jetson TX2/28 Display debug"

From eLinux.org
Jump to: navigation, search
(Known issues)
(Blanked the page)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Get prepared==
 
This section focuses on debug display driver issue on rel-28.x release.<br>
 
Drivers of tegra display controller are under kernel source: https://developer.nvidia.com/embedded/downloads <br>
 
Location: <br>
 
'''For T210(TX1)''' <br>
 
kernel/display/drivers/video/tegra/dc/ <br>
 
'''For T186(TX2).''' Note that TX2 still uses driver code of T210. <br>
 
kernel/t18x/drivers/video/tegra/dc <br>
 
  
==Tips==
 
*Print current mode in dc
 
sudo cat /sys/kernel/debug/tegradc.X/mode  #X=0,1,2.
 
*Print current mode in fbcon
 
sudo cat /sys/class/graphics/fb0/mode  #if more than one fb, just change the fbX to whatever you want.
 
*Capture edid
 
sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
 
* Forcing edid
 
1. Prepare a known 256byte EDID.
 
2. set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
 
3. fill in the known EDID to default_720p_edid[256].
 
* If I hit underflow? (red screen or blank line flicker)
 
sudo cat /sys/kernel/debug/tegradc.0/stats
 
underflows: 35
 
underflows_a: 143
 
underflows_b: 0
 
underflows_c: 0
 
 
*Blank/Unblank window/display
 
sudo  echo 4 > /sys/class/graphics/fb0/blank  #blank display and power down
 
sudo  echo 1 > /sys/class/graphics/fb0/blank  #blank display and show the background color
 
sudo  echo 0 > /sys/class/graphics/fb0/blank
 
 
*Other issues
 
dmesg |grep tegradc #print out display kernel related message
 
 
==Known issues==
 
*HDMI
 
** Display is not be able to up. Moreover, system is not able to up.(Fixed after rel-28.2)
 
***https://devtalk.nvidia.com/default/topic/1003956/jetson-tx2/tx2-not-booting-up-with-hdmi-connected/post/5160211/#5160211
 

Latest revision as of 01:28, 10 January 2018