Jetson TX2/28 Display debug

< Jetson TX2
Revision as of 23:50, 8 January 2018 by Waynewww (talk | contribs) (Tips)
Jump to: navigation, search

Get prepared

This section focuses on debug display driver issue on rel-28.x release.
Drivers of tegra display controller are under kernel source:
For T210(TX1)
For T186(TX2). Note that TX2 still uses driver code of T210.


  • Print current mode in dc
sudo cat /sys/kernel/debug/tegradc.X/mode  #X=0,1,2.
  • Print current mode in fbcon
sudo cat /sys/class/graphics/fb0/mode  #if more than one fb, just change the fbX to whatever you want.
  • Capture edid
sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
  • Forcing edid
  1. Prepare a known 256byte EDID.
  2. set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
  3. fill in the known EDID to default_720p_edid[256].

Known issues