Difference between revisions of "Jetson TX2/r28 Display debug"

From eLinux.org
Jump to: navigation, search
(Tips)
(Tips)
Line 33: Line 33:
  
 
*Error log from X11
 
*Error log from X11
  #Add below option in /etc/X11/xorg.conf
+
  #Add below option in /etc/X11/xorg.conf, more log will be shown in /var/log/Xorg.0.log
 
  Option  "ModeDebug"
 
  Option  "ModeDebug"
  

Revision as of 18:01, 30 January 2018

Get prepared

This section focuses on debug display driver issue on rel-28.x BSP.
Drivers of tegra display controller are under kernel source: https://developer.nvidia.com/embedded/downloads
For T210(TX1)
kernel/display/drivers/video/tegra/dc/
For T186(TX2). Note that TX2 still uses driver code of T210.
kernel/t18x/drivers/video/tegra/dc

Tips

  • Print out display kernel related message
dmesg |grep tegradc
  • Print current mode in dc
sudo cat /sys/kernel/debug/tegradc.X/mode  #X=0,1,2.
  • Print current mode in fbcon
sudo cat /sys/class/graphics/fb0/mode  #if more than one fb, just change the fbX to whatever you want.
  • Capture edid
sudo cat /sys/kernel/debug/tegradc.X/edid  #X=0,1,2.
  • Forcing edid (This is most likely when your monitor failed to be up due to problematic default EDID)
1. Prepare a known 256byte EDID.
2. set use_fallback = true; in tegra_edid_get_monspecs() under edid.c.
3. fill in the known EDID to default_720p_edid[256].
  • Do I hit underflow? (red screen or blank line flicker)
sudo cat /sys/kernel/debug/tegradc.0/stats
underflows: 35
underflows_a: 143
underflows_b: 0
underflows_c: 0
  • Blank/Unblank window/display
sudo  echo 4 > /sys/class/graphics/fb0/blank  #blank display and power down
sudo  echo 1 > /sys/class/graphics/fb0/blank  #blank display and show the background color
sudo  echo 0 > /sys/class/graphics/fb0/blank  #unblank display
  • Error log from X11
#Add below option in /etc/X11/xorg.conf, more log will be shown in /var/log/Xorg.0.log
Option   "ModeDebug"

Issues