Difference between revisions of "Jetson Xavier NX"

From eLinux.org
Jump to: navigation, search
m
m
Line 6: Line 6:
  
 
[[File:JetsonXavierNX-Module_TopDown_400px.png|400px|right|text-bottom]]
 
[[File:JetsonXavierNX-Module_TopDown_400px.png|400px|right|text-bottom]]
 +
 +
= Jetson Xavier NX Module =
 +
 +
The [https://developer.nvidia.com/embedded/jetson-xavier-nx Jetson Xavier NX] compute module contains the Xavier SoC, memory, eMMC storage, and power circuitry.  The I/O ports are broken out through a carrier board via a 260-pin SO-DIMM edge connector, which is backwards-compatible with the [https://developer.nvidia.com/embedded/jetson-nano Jetson Nano] module pin-out.
 +
 +
Below is a partial list of the module's features.  Please see the [https://developer.nvidia.com/embedded/jetson-xavier-nx-module-data-sheet Jetson Xavier NX Module Datasheet] for the complete specifications.
 +
 +
[[File:Jetson_NX_Block_Diagram.png|900px|right]]
 +
 +
=== Processing Components ===
 +
* 6-core NVIDIA Carmel ARMv8.2 CPU @ 1400MHz (up to 1900MHz in dual-core mode)
 +
* 384-core Volta GPU @ 1100MHz with 64 Tensor Cores
 +
* Dual [http://nvdla.org/ Deep Learning Accelerator] (DLA) engines
 +
* 8GB 128-bit LPDDR4x @ 1600MHz (51.2GB/s)
 +
* 16GB eMMC 5.1
 +
* (2x) 4Kp30 H.264/H.265 video encoder
 +
* (2x) 4Kp60 H.264/H.265 video decoder
 +
 +
=== I/O Interfaces & Ports ===
 +
* (12x) MIPI CSI-2 lanes, 3x4 or 6x2 cameras
 +
** up to 6 active sensor streams and 36 virtual camera channels
 +
* (2x) PCIe Gen 3 controllers | 1x1, 1x4
 +
** 1x4 - Root Port and Endpoint
 +
** 1x1 - Root Port
 +
* USB 3.1 (10Gbps) + (3x) USB 2.0
 +
* (2x) DP 1.4 / eDP 1.4 / HDMI 2.0 a/b @ 4Kp60
 +
* 10/100/1000 BASE-T Ethernet
 +
* (3x) UART, (2x) SPI, (2x) I2C, I2S, CAN, GPIOs
 +
 +
=== Form-Factor ===
 +
* 260-pin SO-DIMM edge connector (backwards compatible with [https://developer.nvidia.com/embedded/jetson-nano Jetson Nano] module pin-out)
 +
* dimensions: 70x45mm
 +
* -25C to 90C operating temperature (Tj)
 +
* 5VDC input power
 +
* 10/15W power modes

Revision as of 07:02, 15 April 2020

NVIDIA Jetson Xavier NX is an embedded system-on-module (SoM) from the NVIDIA Jetson family, including an integrated 384-core Volta GPU with Tensor Cores, dual Deep Learning Accelerators (DLAs), 6-core NVIDIA Carmel ARMv8.2 CPU, 8GB 128-bit LPDDR4x with 51.2GB/s of memory bandwidth, hardware video codecs, and high-speed I/O including PCIe Gen 3, 12 camera lanes of MIPI CSI-2, USB 3.1.

Useful for deploying computer vision and deep learning to the edge, Jetson Xavier NX runs Linux and provides up to 21 TeraOPS (TOPS) of compute performance in user-configurable 10/15W power profiles.

Jetson Xavier NX is available as the Jetson Xavier NX compute module and is backwards-compatible with the production B01-revision of Jetson Nano. See the wiki of previous Jetson's here.

JetsonXavierNX-Module TopDown 400px.png

Jetson Xavier NX Module

The Jetson Xavier NX compute module contains the Xavier SoC, memory, eMMC storage, and power circuitry. The I/O ports are broken out through a carrier board via a 260-pin SO-DIMM edge connector, which is backwards-compatible with the Jetson Nano module pin-out.

Below is a partial list of the module's features. Please see the Jetson Xavier NX Module Datasheet for the complete specifications.

Jetson NX Block Diagram.png

Processing Components

  • 6-core NVIDIA Carmel ARMv8.2 CPU @ 1400MHz (up to 1900MHz in dual-core mode)
  • 384-core Volta GPU @ 1100MHz with 64 Tensor Cores
  • Dual Deep Learning Accelerator (DLA) engines
  • 8GB 128-bit LPDDR4x @ 1600MHz (51.2GB/s)
  • 16GB eMMC 5.1
  • (2x) 4Kp30 H.264/H.265 video encoder
  • (2x) 4Kp60 H.264/H.265 video decoder

I/O Interfaces & Ports

  • (12x) MIPI CSI-2 lanes, 3x4 or 6x2 cameras
    • up to 6 active sensor streams and 36 virtual camera channels
  • (2x) PCIe Gen 3 controllers | 1x1, 1x4
    • 1x4 - Root Port and Endpoint
    • 1x1 - Root Port
  • USB 3.1 (10Gbps) + (3x) USB 2.0
  • (2x) DP 1.4 / eDP 1.4 / HDMI 2.0 a/b @ 4Kp60
  • 10/100/1000 BASE-T Ethernet
  • (3x) UART, (2x) SPI, (2x) I2C, I2S, CAN, GPIOs

Form-Factor

  • 260-pin SO-DIMM edge connector (backwards compatible with Jetson Nano module pin-out)
  • dimensions: 70x45mm
  • -25C to 90C operating temperature (Tj)
  • 5VDC input power
  • 10/15W power modes