Kernel dynamic memory analysis
This page has notes and results from the project Kernel dynamic memory allocation tracking and reduction
[This page is fairly random at the moment...]
Contents
- 1 Instrumentation overview
- 2 Using debugfs and ftrace
- 3 Obtaining accurate call sites (or The painstaking task of wrestling against gcc)
- 4 Memory accounting
- 5 Reporting
- 6 Visualization
- 7 Mainline status
- 8 Recommendations for reductions
- 9 Results so far (in random order)
Instrumentation overview
- Slab_accounting patches
- uses __builtin_return_address(0) to record the address of the caller, the same mechanism used by kmem events
- starts from very first allocation
- Ftrace kmem events
- does not start until ftrace system is initialized, after some allocations are already performed
- supported in mainline - no need to add our own instrumentation
These two instrumentation methods are basically the same: trap each kmalloc, kfree, etc. event and produce relevant information with them. The difference between them is that the first post-processes the events in-kernel and create a /proc/slab_account file to access the results. This output is more or less like this:
total bytes allocated: 1256052 total bytes requested: 1077112 slack bytes allocated: 178940 number of allocs: 7414 number of frees: 5022 number of callers: 234 total slack req alloc/free caller 2436 232 2204 29/0 bio_kmalloc+0x33 268 8 260 1/0 pci_alloc_host_bridge+0x1f 32 8 24 1/0 tracepoint_entry_add_probe.isra.2+0x86 44 8 36 1/0 cpuid4_cache_sysfs_init+0x30 0 0 0 0/3 platform_device_add_data+0x33 [...]
On the other hand, analysing ftrace kmem events will defer post-processing to be done at user space, thus achieving much more flexibility. A typical trace log would be like this:
TODO
The disadvantage of the ftrace method is that it needs to be initialized before capturing events. Currently, this initialization is done at fs_initcall and we're working on enabling them earlier. For more information, checkout this upstreamed patch:
trace: Move trace event enable from fs_initcall to core_initcall
This patch allows to enable events at core_initcall. It's also possible to enable it at early_initcall. Another posibility is to create a static ring buffer and then copy the captured events into the real ring buffer.
Also, we must find out if early allocations account for significant memory usage. If not, it may not be that important to capture them. Yet another possibility is to use a printk brute-force approach for very early allocations, and somehow coalesce the data into the final report.
Using debugfs and ftrace
For more information, please refer to the canonical trace documentation at the linux tree:
- Documentation/trace/ftrace.txt
- Documentation/trace/tracepoint-analysis.txt
- and everything else inside Documentation/trace/
(Actually, some of this information has been copied from there.)
Debugfs
The debug filesystem it's a ram-based filesystem that can be used to output a lot of different debugging information. This filesystem is called debugfs and can be enabled with CONFIG_DEBUG_FS:
Kernel hacking [*] Debug filesystem
After you enable this option and boot the built kernel, it creates the directory /sys/kernel/debug as a location for the user to mount the debugfs filesystem. Do this manually:
$ mount -t debugfs none /sys/kernel/debug
You can add a link to type less and get less tired:
$ ln -s /debug /sys/kernel/debug
Tracing
Once we have enabled debugfs, we need to enable tracing support. This is done with CONFIG_TRACING option, this option will add a /sys/kernel/debug/tracing directory on your mounted debugfs filesystem. Traced events can be read through debug/tracing/trace.
To dynamically enable trace events you need to enable CONFIG_FOO. Once it is enabled you can see the available events by listing TODO.
TODO TODO TODO TODO
To enable events on bootup you can add them to kernel parameters, for instance to enable kmem events:
trace_event=kmem:kmalloc,kmem:kmem_cache_alloc,kmem:kfree,kmem:kmem_cache_free
Warning: if you use SLOB on non-NUMA systems, where you might expect kmalloc_node not get called, actually it is the only one called. This is due to SLOB implementing only kmalloc_node and having kmalloc call it without a node. Same goes to kem_cache_alloc_node.
Obtaining accurate call sites (or The painstaking task of wrestling against gcc)
The compiler inlines a lot automatically and without warning. In this scenario, it's impossible to get the real call site name based on just calling address.
When some function is inlined, it gets collapsed and it won't get listed as a symbol if you use tools like readelf, objdump, etc.
Does this matter? Well, it matters if you want to obtain an accurate call site report when tracing kernel memory events (which will see later).
However, there is one solution! You can turn off gcc inlining using an options on kernel Makefile. The option is called 'no-inline-small-functions'. See this patch:
diff --git a/Makefile b/Makefile index 8e4c0a7..23f1a88 100644 --- a/Makefile +++ b/Makefile @@ -363,6 +363,7 @@ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ -Werror-implicit-function-declaration \ -Wno-format-security \ + -fno-inline-small-functions \ -fno-delete-null-pointer-checks KBUILD_AFLAGS_KERNEL := KBUILD_CFLAGS_KERNEL :=
Of course, this option makes a bit smaller and slower kernel, but this is an expected side-effect on a debug-only kernel.
We must keep in mind that no matter what internal mechanisms we use to record call_site, if they're based on __builtin_address, then their accuracy will depend entirely on gcc *not* inlining automatically.
The enfasis is in the automatic part. There will be lots of functions we will need to get inlined in order to determine the caller correctly. These will be marked as __always_inline.
See upstreamed patch:
Makefile: Add option CONFIG_DISABLE_GCC_AUTOMATIC_INLINING)
Memory accounting
Introduction. Kinds of memory
The kernel, being a computer program, can consume memory in two different ways: statically and dynamically.
Static memory can be measured offline, therefore accounted before actually running the kernel using standard binary inspection utilites (readelf, objdump, size, etc). We will explore this utilities in detail.
Dynamic memory cannot be measured offline, and it's not only necesarry to probe a running kernel but also to enable aditional probe code to trace each allocation. Fortunately for us, the linux kernel has ftrace which is a tracing framework that allows to trace general events, and in particular memory allocation events. We will explore this framework in detail.
Static memory
A compiled kernel will allocate static memory to store two kinds of symbols: code symbols (a.k.a text) and data symbols (a.k.a data).
For instance, let's look at this piece of C code:
long curr; int max = 10;
int foo(int var) { int i = var + max; if (i < max) curr = i; }
We have three different symbols:
- curr : a variable (data zero initialized)
- max : an initialized variable (data non-zero initialized)
- foo : a function (text)
Once this code is running each of these symbols will need memory for its own storage. However, the zero initialized variable will not use space in the compiled binary. This is due to a special section inside the binary (called bss for no good reason) where all the zero initialized variables are placed. Since they carry no information, they need no space. Static variables have the same life as the executing program.
On the other side, var and i variables are dynamically allocated, since they live in the stack. They are called automatic variables, meaning that they have a life cycle that's not under our control.
Note that when we talk about static memory, the word static has nothing to do with the C-language keyword. This keyword references a visibility class, where static means local, as opposed to global.
The size command
The most simple command to get a binary static size, is the wonderfully called size command. Let's start by seeing it in action:
$ size ./fs/ext2/ext2.o text data bss dec hex filename 51273 68 8 51349 c895 ./fs/ext2/ext2.o
According to this output, this object file has roughly 50k bytes of text and 68 bytes of data. Now, size comes in two flavors: berkeley and sysv. Each of this shows a different output. The default is berkeley, so the previous example was a berkeley output.
However, if we use the same command with sysv output format, we'll find very different results:
$ size --format=sysv ./fs/ext2/ext2.o ./fs/ext2/ext2.o : section size addr .text 43005 0 .init.text 138 0 .exit.text 25 0 .rodata 2304 0 .rodata.str1.1 1656 0 .rodata.str1.4 3485 0 .data 60 0 .exitcall.exit 4 0 .initcall6.init 4 0 .bss 8 0 .note.GNU-stack 0 0 .comment 675 0 [...]
Here we see a more detailed description about each section size. Note the appearence of a .rodata (read-only data) section, of 2k byte large. This section is composed of read-only variables (e.g. marked const) that are not accounted by the standard size format.
We can conclude that standard size format gives an incomplete picture of the compiled object.
To add even more confusion to this picture, gcc can decide (at his own will) to put inside .rodata section symbols not marked as const. These symbols are not written by anyone, and gcc considers them as read-only (pretty smart, uh?). This means you can have a .rodata section bigger than what you expected to have.
This happens since gcc v4.7 (???)
readelf
This two commands can give us any information we need about a binary. In particular, they can output the complete list of symbols with detailed information about each one. Let's see an example of readelf on the same file we used for size. The output is stripped for more clearance.
$ readelf -s fs/ext2/ext2.o
Symbol table '.symtab' contains 413 entries: Num: Value Size Type Bind Vis Ndx Name 0: 00000000 0 NOTYPE LOCAL DEFAULT UND 1: 00000000 0 SECTION LOCAL DEFAULT 1 [...] 339: 00004da0 286 FUNC GLOBAL DEFAULT 1 ext2_evict_inode 340: 000003e0 76 OBJECT GLOBAL DEFAULT 7 ext2_nobh_aops 341: 00000780 128 OBJECT GLOBAL DEFAULT 7 ext2_symlink_inode_operat 342: 000008d8 20 OBJECT GLOBAL DEFAULT 7 ext2_xattr_acl_default_ha 343: 00000000 0 NOTYPE GLOBAL DEFAULT UND generic_file_aio_write 344: 00000280 128 OBJECT GLOBAL DEFAULT 7 ext2_file_inode_operation 345: 00000000 0 NOTYPE GLOBAL DEFAULT UND __dquot_alloc_space 346: 00000000 0 NOTYPE GLOBAL DEFAULT UND generic_setxattr 347: 00000000 0 NOTYPE GLOBAL DEFAULT UND unlock_buffer 348: 000014c0 36 FUNC GLOBAL DEFAULT 1 ext2_bg_num_gdb 349: 00005240 684 FUNC GLOBAL DEFAULT 1 ext2_setattr [...]
For instance, ext2_nobh_aops is an OBJECT symbol (data) of 76 bytes and ext2_evict_inode is a FUNC symbol (text) of 286 bytes. Notice there are some UND symbols. They are undefined symbols for this file, that are defined elsewhere and therefore not of interest for us when inspecting a file size.
Of course, this output can be combined with grep to get fantastic results. Let's count the numbers of defined functions:
$ readelf -s fs/ext2/ext2.o | grep -v UND | grep FUNC
With a little awk magic we could even sum these sizes and get the size of the .text section. TODO!
objdump
TODO
Dynamic
Dynamic memory in kernel land is a little different from user land.
In user land, all one needs to do to get a chunk of memory is call malloc(). In kernel land, we have a similar function: kmalloc(). But we also have lots of other functions to alloc memory, and we must have some special considerations.
The first thing it's important to understand is that kernel obtains memory (well, in most architectures) on a fixed-size chunk, that we call a 'page' of memory. This page of memory tipically is 4096 bytes large, but this depends on the architecture.
In order to delivery smaller pieces of memory, the kernel have a few couple of layers that ultimately lets you do kmalloc(100) and get 100 bytes. These layers are called: buddy allocator and slab allocator.
We will focus on the latter. Slab allocator comes in three different flavors: SLAB, SLOB and SLUB. These funny names are historically, but the meaning is:
- SLAB is the traditional
- SLOB is aimed at tiny embedded systesm (e.g. without mmu)
- SLUB is the default
Each of these implement the allocation in a different way, but they all share a common property: internal fragmentation.
Internal fragmentation
For different reasons (alignment, overhead, etc) when we request 100 bytes with kmalloc(100) the slab allocator may really allocate 128 bytes (or 140 bytes, we can't really know). These extra 28 bytes can't be used, and therefore you are wasting them. This is called internal fragmentation, and one of the main goals of the slab allocator is to minimize it. In other words, trying to match as nearly as possible the requested size with the truly allocated size.
Accounting with kmem events trace
Ftrace kmem events are a great source of information. By using them you can trace each kmalloc, getting the requested bytes, the allocated bytes, the caller address and the returned pointer. You can also trace kfree, getting the caller address and the freed pointer.
Once you have the caller address you can use System.map file to get the caller function name. Also, by using the returned pointer and correlating with kfree traces you can keep track of currently used dynamic memory by each kernel function / subsystem.
Let's see this in detail.
Enabling and reading kmem trace
We can activate this on boot up with kernel parameter trace_event. For instance,
trace_event=kmem:kmalloc,kmem:kmem_cache_alloc,kmem:kfree,kmem:kmem_cache_free
or you can activate on-the-fly with:
TODO
Once you have enabled events, you can run your favourite program (in order to trigger some allocations). When you're done you may disable events (or not) and read them:
$ cat /sys/kernel/debug/tracing/trace > kmem.log
Let's see a piece of this log:
TODO
This log can be post-processed. For your convenience we have a script trace_analyze.py that does exactly this (see below).
About kmem trace events
As we have seen there are a few more events than kmalloc and kfree. Let's see them all:
- kmalloc
- kfree
- kmalloc_node
- kmem_cache_alloc
- kmem_cache_alloc_node
- kmem_cache_free
Using the trace_analyze.py post-processing script
TODO
Reporting
- extracting data to host
- tool for extraction (perf?, cat /debugfs/tracing/<something>?)
- post-processing the data
- grouping allocations (assigning to different subsystems, processes, or functional areas)
- idea to post-process kmem events and correlate with */built-in.o
- reporting on wasted bytes
- reporting on memory fragmentation
- grouping allocations (assigning to different subsystems, processes, or functional areas)
Visualization
Matplotlib [[1]]
We will use matplotlib with its Wedge api to create a ring chart (similar to gnome baobab). We'll get something like this...
Mainline status
- trace: Move trace event enable from fs_initcall to core_initcall
- mm: SLxB cleaning and trace accuracy improvement
- mm: Use __do_krealloc to do the krealloc job
- git commit id: e21827aa [[2]]
Recommendations for reductions
Results so far (in random order)
- There's a lot of fragmentation using the SLAB allocator. [how much?]
- SLxB accounting is a dead-end (it won't be accepted into mainline)
more???