Difference between revisions of "LED Matrix Failure"

From eLinux.org
Jump to: navigation, search
(Left->Right Left->Right)
Line 9: Line 9:
* [http://www.adafruit.com/products/2239 Adafruit DotStar Digital LED Strip - Black 60 LED - Per Meter - BLACK]  
* [http://www.adafruit.com/products/2239 Adafruit DotStar Digital LED Strip - Black 60 LED - Per Meter - BLACK]  
* [http://www.digikey.com/product-detail/en/PMT-5V350W1AM/1145-1081-ND/4386552 Power Supply 5V@60A 350W]  
* [http://www.digikey.com/product-detail/en/PMT-5V350W1AM/1145-1081-ND/4386552 Power Supply 5V@60A 350W]  
* Connectors
* Connectors - each set of Dotstar LED comes with a pair of 4-pin "male" and "female" connectors these were reused in the design<br>
= Layout =
= Layout =

Revision as of 13:27, 2 September 2015


Document the failure and redesign of a LED Matrix display consisting of 30 strips of Adafruit Dotstar LEDs.


4pin-male-dotstar.jpg 4pin-female-dotstar.jpg



the base was made with some black upholstery fabric. a piece size of 57" x 30" was cut and taken to a seamstress to have the edges sewn. after sewing, a manual metal grommet press was used to add grommets to each of the four corners.
Grommet-1.jpg Grommet-2.jpg

Left->Right Left->Right

The Dotstar LEDs for the failed version were arranged in a chained sequence. the intention was to cut the strips and align them on the fabric in a "left to right - left to right" sequence similar to tradition LCD panels. this sequence is typically something like this for an 5x5 pixel example:

01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25

the issue is that to implement this with the LED strips, two wires need to connect the end of one LED strip to the beginning of the next, in the 5x5 pixel example above, the SPI clock and data need to connect from the end at 05 to the beginning of the next line at 06. this creates a wiring nightmare on the back side of the design:
Backside-wiring-led.jpg Backside-closeup-led.jpg

the thought was by design it this way, and working similar to existing display devices, software support would be easy and require little or no effort to implement. while this was true the long wires created both signaling and logistical problems during implementation.

Left->Right Right->Left

To remove the need for the long wires it makes more sense hardware wise to implement the strips using the "left to right - right to left" sequence. this is represented again in a 5x5 pixel example:

01 02 03 04 05
10 09 08 07 06
11 12 13 14 15
20 19 18 17 16
21 22 23 24 25

as you can see the encoding is a little more difficult, but it can be easily handled in software to sequence this. the trade off here between a little more difficult in software, and a LOT easier in hardware, really is the only choice.


  • power connections
  • long wires
  • broken flex pads

Signal Issues

  • long SPI signals
  • quick fix

PCB Design

  • signals
  • layout
  • features
  • eagle files
  • soldering