LeapFrog Pollux Platform: Source Code

Official LeapFrog Sources

Didj

LeapFrog Open Source Compliance Document

2008-04-29 Release

• 2008 version

2009-04-22 Release

• 2009 version

Explorer

2011-06-02 Release

• LF-Linux-2503-20110602-1237.tar.gz 132MB

• LF-OE-545-20110602-1237.tar.gz 340MB

• LF-ThirdParty-7594-20110602-1237.tar.gz 20MB

2010-10-26 Release

• LF-Linux-8291-20101026-1425.tar.gz 99MB

• LF-OE-346-20101026-0945.tar.gz 337MB

• LF-ThirdParty-8291-20101025-1623.tar.gzz 20MB

2010-06-10 Release

• LF-Linux-6905-20100610-0915.tar.gz 94MB

• LF-OE-251-20100614-0852.tar.bz2 320MB

• LF-ThirdParty-7299-20100609-1458.tar.gz 20MB

LeapPad

2011-06-02 PreRelease (Same as Explorer 2011-06-02)

• LF-Linux-2503-20110602-1237.tar.gz 132MB

• LF-OE-545-20110602-1237.tar.gz 340MB

• LF-ThirdParty-7594-20110602-1237.tar.gz 20MB

Homebrew

Didj

• Jburk's OpenDidj Linux Kernel/Rootfs Tree Git Repository

• Corbin's OpenDidj Linux Kernel Tree Git Repository

• Claude's OpenDidj Linux Kernel Tree (LF 2008 Source) Git Repository

Boot Loaders

Didj

• Lightning-boot 1.6 update
• Lightning-boot 2.0 update

Leapster Explorer

• Emerald Boot Version 1.46
  • UART Boot, SD Enabled Patch sha1(c49cb940c7164710624271613b92175366440f5a)

Toolchains

Should work on all sources codes listed.

• RidgeRun Toolchain (Recommended)
• Devroot (CodeSourcery Based)

For Didj Specifically

• Creating a Kernel Build Scratchbox
• Setting up a Cross Compiler Build Environment and Basic Usage
• An alternate cross compiler, built with crosstool-NG