Minnowboard:Automotive Lure

From eLinux.org
Revision as of 11:44, 2 April 2013 by Prpplague (talk | contribs) (Prpplague moved page Automotive Lure to Minnowboard:Automotive Lure without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is for discussions/specs for an Automotive Lure for the http://www.minnowboard.org

you can use the "Discussion" section or place content here!

Possible Features

Smart power lure:

  • programmable start and shutdown with vehicle ignition.
  • interface to read ignition voltage, VIN voltage and current
  • Aux +12V outputs with interface to turn on/off aux devices

lure should be similar to: http://www.mini-box.com/DCDC-USB-200

CAN/OBD-II lure:

  • Support OBD-II via the STN1110 chip.
  • Extra hardware to support HS, MS and SW CAN protocols via the STN1110 (similar to how the OBDLink MX does it).

Combination Smart power + OBD-II

  • Combines the smart power lure and CAN/OBD-II lure in one.