Difference between revisions of "Minnowboard:Hardware Revisions"

From eLinux.org
Jump to: navigation, search
(Created page with "= Revision A = == Known Software Issues == * GPIO buttons are slow to respond == Known Hardware Issues == * Left/Right Audio channels swapped on line-out jack")
 
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
= Revision A =
+
= MinnowMax =
 +
== Revision A0 ==
  
== Known Software Issues ==
+
Hardware test platform (limited availability)
 +
 
 +
== Revision A1 ==
 +
 
 +
General Availability (Expected June 2014)
 +
 
 +
=== Known Software Issues ===
 +
* None
 +
 
 +
=== Known Hardware Issues ===
 +
* None
 +
 
 +
= MinnowBoard=
 +
== Revision A ==
 +
 
 +
=== Known Software Issues ===
 
* GPIO buttons are slow to respond
 
* GPIO buttons are slow to respond
  
 +
=== Known Hardware Issues ===
 +
 +
1. Left/Right Audio channels swapped on line-out jack
 +
*Workaround: edit /etc/asound.conf to swap the channels:
 +
# Swap L/R channels for MinnowBoard Rev A boards
 +
pcm.!default {
 +
    type route
 +
    slave.pcm "cards.pcm.default"
 +
    ttable.0.1 1
 +
    ttable.1.0 1
 +
}
  
== Known Hardware Issues ==
+
2. The silkscreen for the RTC battery polarity is incorrect on the MinnowBoard.
 +
*Workaround: No damage will occur if you insert the RTC battery backwards.
  
* Left/Right Audio channels swapped on line-out jack
+
[[Category:MinnowBoard]]

Latest revision as of 12:51, 19 March 2015

MinnowMax

Revision A0

Hardware test platform (limited availability)

Revision A1

General Availability (Expected June 2014)

Known Software Issues

  • None

Known Hardware Issues

  • None

MinnowBoard

Revision A

Known Software Issues

  • GPIO buttons are slow to respond

Known Hardware Issues

1. Left/Right Audio channels swapped on line-out jack

  • Workaround: edit /etc/asound.conf to swap the channels:
# Swap L/R channels for MinnowBoard Rev A boards
pcm.!default {
    type route
    slave.pcm "cards.pcm.default"
    ttable.0.1 1
    ttable.1.0 1
}

2. The silkscreen for the RTC battery polarity is incorrect on the MinnowBoard.

  • Workaround: No damage will occur if you insert the RTC battery backwards.