Difference between revisions of "Minnowboard:Lures Specifications"

From eLinux.org
Jump to: navigation, search
(Prototype Breakout)
(Prototype Breakout)
Line 102: Line 102:
** gpio
** gpio
** usb host
** usb host
[[File:bob-lure-top.jpg|200px]] [[File:bob-lure-front.jpg|200px]] [[File:bob-lure-back.jpg|200px]] [[file:bob-lure-side.jpg|200px]]
[[File:bob-lure-closeup.jpg|200px]] [[File:bob-lure-top.jpg|200px]] [[File:bob-lure-front.jpg|200px]] [[File:bob-lure-back.jpg|200px]] [[file:bob-lure-side.jpg|200px]]
== I/O Pad ==
== I/O Pad ==

Revision as of 10:25, 1 July 2013

NOTE: The Lure Board Specifications are under development and are a "work in progress"

Lure Types

Lure-Types.jpg Lure-Connectors.jpg

Type A

  • 106.68mm x 106.68mm (4.2" x 4.2")
  • Connector A99244-ND Female (digikey part number)
  • Mated height 17mm (when mated with 5mm base)
  • Hex Standoff 24436K-ND (digikey part number)
  • Placement over top of board
  • Four mounting holes at edges of minnow

Type-a-top.jpg Type-a-front.jpg Type-a-back.jpg Type-a-connector.jpg

Type B

  • 62.25mm x 106.68mm (2.45" x 4.2")
  • Connector A99231TR-ND Female (digikey part number)
  • Mated height 10mm (when mated with 5mm base)
  • Hex Standoff 24433K-ND (digikey part number)
  • Placement over top of board
  • Two screw mounting holes in center of minnow

Type-b-top.jpg Type-b-front.jpg Type-b-back.jpg Type-b-connector.jpg


  • 62.25mm x 62.25mm (2.45" x 2.45")
  • Connector A99192TR-ND Female (digikey part number)
  • Mated height 6mm (when mated with 5mm base)
  • No mounting standoffs (needs review)
  • Extends from side of minnow board
  • No mount holes (needs review)

Type-c-top.jpg Type-c-front.jpg Type-c-back.jpg Type-c-connector.jpg

Lure Features

Minnow Board and Passthrough

  • Connector A99205CT-ND Male (digikey part number)
  • Mated height base 5mm (plus female connector height)


  • i2c eeprom
  • recommended size 256k
  • CAT24C256W
  • configurable for address

LVDS Interface

Reference Lures

Beacon Lure

  • Type-C Lure
  • 7 Segment Display via Shift Register
  • PWM Controlled RGB LED
  • Beacon Lure Page

Trainer Lure


  • Type-B Lure
  • Backlight Power supply
  • FPDLink-I connector (aka LVDS)
  • LVDS Lure Page

MiniPCIe / mSATA Lure

  • Type-A Lure
  • miniPCIe Connector
  • mSATA Connector

Prototype Breakout

  • Type-C Lure
  • Breakout for all low speed signals
    • i2c
    • spi
    • gpio
    • usb host

Bob-lure-closeup.jpg Bob-lure-top.jpg Bob-lure-front.jpg Bob-lure-back.jpg Bob-lure-side.jpg

I/O Pad

  • Type-B Lure
  • 5 buttons
  • 5 LEDS
  • 2x10 Character LCD


Hardware References