Difference between revisions of "Minnowboard:MaxLures"

From eLinux.org
Jump to: navigation, search
(add library for lure connectors)
(Deleted design files for lures by Rod at Circuitco)
Line 1: Line 1:
[[Minnowboard:MinnowMax| Minnowboard Max]] Lure Information
 
  
= Planned Lures =
 
== Calamari Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|Break out board intended mainly for testing gpio and low speed interfaces, as
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** SPI Based ADC
 
** 10K Slider POT
 
** RGB LED
 
** 2 PWM LEDS
 
** 2 TTL UART Headers
 
** 7-Segment Display with 595 shift register
 
** I2C EEPROM
 
** 3 Buttons
 
|
 
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
 
 
* '''Available From:'''
 
** [http://www.technodisti.com/online-store/boards/calamari-lure-detail.html Technodisti]
 
|}
 
 
| [[File:CalamariLure-SlantedTop01-650.jpg|450px|right]]
 
|-
 
|
 
* '''Design Files:'''
 
**[http://www.elinux.org/images/b/bf/Calamari_Lure_A1.zip EAGLE design files]
 
**[http://www.elinux.org/images/3/37/Calamari_Lure_A1_Gerbers.zip Gerber]
 
**[http://www.elinux.org/images/b/bc/Calamari_Lure_A1_BOM.zip Bill of Materials]
 
**[http://www.elinux.org/images/8/8c/Calamari_Lure_A1_schematic.pdf Schematic (PDF)]
 
|}
 
 
== Ika Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX.
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** Electrically Arduino Compatible
 
** 3.3v & 5.5v tolerant (flipped via jumpers)
 
|
 
* '''Produced by:''' CircuitCo
 
* '''[[MinnowBoard:MaxLure-Ika|Additional Information]]'''
 
|}
 
| [[File:MinnowMax_-_Lure_-_Ika.png|200px|right]] [[File:Ika-lure-a.jpg|200px|right]]
 
|}
 
 
== Seacat Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
| mPCI-E and mSATA break out board
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** mPCIe Slot
 
** mSATA Slot
 
|
 
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
|}
 
|
 
[[File:Seacat-lure-a.jpg|450px|right]]
 
 
|-
 
|
 
* '''Design files:'''
 
**[http://www.elinux.org/images/f/fe/SEACAT_SCH_REVA.pdf Schematic (PDF)]
 
|}
 
 
<br>
 
<br>
 
<br>
 
<br>
 
 
== Jetsam Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
| mPCI-E break out board
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** Single mPCIe Slot
 
|
 
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
 
 
* '''Available from:'''
 
** [http://www.technodisti.com/online-store/boards/jetsam-lure-detail.html Technodisti]
 
|}
 
|
 
[[File:Jetsam-lure-a.jpg|450px|right]]
 
 
|-
 
|
 
* '''Design Files:'''
 
**[[media:Jetsam-Lure_X1.zip|EAGLE design files]]
 
**[[media:Jetsam-Lure_X1_Gerbers.zip|Gerber]]
 
**[[media:Jetsam-Lure_X1_BOM.zip|Bill of Materials]]
 
**[[media:Jettsam-Lure_X1_Schematic.pdf|Schematic (PDF)]]
 
|}
 
 
== Flotsam Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
| mSATA break out board
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** single mSATA Slot
 
|
 
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
 
 
* '''Available from:'''
 
** [http://www.technodisti.com/online-store/boards/flotsam-lure-detail.html Technodisti]
 
|}
 
|
 
[[File:Flotsam-lure-a.jpg|450px|right]]
 
 
|-
 
|
 
 
*'''Design Files:'''
 
**[[media:Flotsam-Lure_A1.zip|EAGLE design files]]
 
**[[media:Flotsam-Lure_A1_Gerbers.zip|Gerber]]
 
**[[media:Flotsam-Lure_A1_BOM.zip|Bill of Materials]]
 
**[[media:Flotsam-Lure_A1_Schematic.pdf|Schematic (PDF)]]
 
|}
 
<br>
 
 
== Prototype Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
| Generic Prototype Area on 0.1" grids
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** Generic Prototype Area on 0.1" grids
 
|
 
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
 
 
* '''Available from:'''
 
** [http://www.technodisti.com/online-store/boards/prototype-lure-detail.html Technodisti]
 
|}
 
|
 
[[File:Prototype-lure-b.jpg|80px]]
 
[[File:ProtoLure-SlantedSide01-650.jpg|400px]]
 
|-
 
|
 
 
* '''Design Files:'''
 
**[http://www.elinux.org/images/d/d9/Proto_Lure_A1.zip EAGLE design files]
 
**[http://www.elinux.org/images/0/01/Proto_Lure_A1_Gerbers.zip Gerber]
 
**[http://www.elinux.org/images/9/97/Proto_Lure_A1_BOM.zip Bill of Materials]
 
**[http://www.elinux.org/images/6/60/Proto_Lure_A1_Schematic.pdf Schematic (PDF)]
 
|}
 
 
== Cuttle(bone) Lure ==
 
{| width="100%"
 
|- style="vertical-align:top;"
 
| Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes.  Works with a variety of Capes but not all.
 
<br/>
 
{| width="100%"
 
|- style="vertical-align:top;"
 
|
 
* '''Features:'''
 
** low speed adapter for MAX to BeagleBone capes
 
|
 
* '''Produced by:''' Tom King
 
*  Additional Information: none available right now
 
|}
 
|
 
[[File:Cuttle_lure.png|450px|right]]
 
 
|-
 
|
 
 
*'''Design Files:'''
 
**[[Cuttle_lure_pg1.pdf|Schematic(PDF)]]<br>
 
**Project files on [https://github.com/ka6sox/Cuttlebone_Lure Github]
 
|}
 
 
== Nic Lure ==
 
* Single Gigabit Ethernet
 
 
== Can Bus Lure ==
 
* standard CAN Bus
 
* Option for STN1110
 
 
== RS-485 Lure ==
 
* standard RS-485
 
 
== RS-232 Lure ==
 
* 2 DB-9 connectors
 
 
== Relay Cape ==
 
* 4 Relays
 
* GPIO Controls
 
 
== USB Hub Lure ==
 
* 4 USB Host Ports
 
 
== PWM Lure ==
 
* 32 PWM Outputs
 
 
== ADC Lure ==
 
* 8 ADC inputs
 
 
== Moto Lure ==
 
* Dual H-Bridge
 
 
== Audio Lure ==
 
* Analog Audio Ouput
 
* Analog Audio Input
 
 
== MiniDisplay Lure ==
 
* SPI Based TFT Display
 
* 2.8"
 
* 4-Wire Resistive Touch
 
 
 
=Libraries=
 
* [http://www.elinux.org/images/1/14/Lures.zip Connectors]
 

Revision as of 08:34, 6 February 2015