Difference between revisions of "Node.js on RPi"

From eLinux.org
Jump to: navigation, search
("recent" is no more)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
NodeJS are now maintaining recent builds for RaspberryPi.  
+
NodeJS maintained builds for RaspberryPi for a while.
  
though you can install an older version of Node.js using apt-get,  
+
Though you can install an even older version of Node.js using apt-get,  
  
You can also compile the very latest yourself.
+
you can also compile the very latest yourself.
  
 
npm is now installed with nodejs.
 
npm is now installed with nodejs.
  
== Download recent version of Node.js ==
+
== Download the most recent arm version of Node.js ==
  
 
  wget '''http://nodejs.org/dist/v0.10.28/node-v0.10.28-linux-arm-pi.tar.gz'''
 
  wget '''http://nodejs.org/dist/v0.10.28/node-v0.10.28-linux-arm-pi.tar.gz'''
  tar -xzf '''node-v0.10.28'''.tar.gz
+
  tar -xzf '''node-v0.10.28-linux-arm-pi.tar.gz'''
 
  node-v0.10.28-linux-arm-pi/bin/node --version
 
  node-v0.10.28-linux-arm-pi/bin/node --version
 
  v0.10.28
 
  v0.10.28

Latest revision as of 04:59, 30 April 2015

NodeJS maintained builds for RaspberryPi for a while.

Though you can install an even older version of Node.js using apt-get,

you can also compile the very latest yourself.

npm is now installed with nodejs.

Download the most recent arm version of Node.js

wget http://nodejs.org/dist/v0.10.28/node-v0.10.28-linux-arm-pi.tar.gz
tar -xzf node-v0.10.28-linux-arm-pi.tar.gz
node-v0.10.28-linux-arm-pi/bin/node --version
v0.10.28

Install older version Node.js

Simply call:

apt-get install nodejs

Build latest version of Node.js

Go to Nodejs.org and copy the source code download url. In my example: http://nodejs.org/dist/v0.10.2/node-v0.10.2.tar.gz

Create a file called install-node.sh and paste the folloing code:

wget http://nodejs.org/dist/v0.10.2/node-v0.10.2.tar.gz
tar -xzf node-v0.10.2.tar.gz
cd node-v0.10.2
./configure
make
sudo make install

Note that in your case, you may need to change the bold parts according to the version you want

After that, you can check that Node and NPM are properly installed using the following command lines:

node -v

should reply v0.10.2

npm -v

should reply 1.2.25

The compilation will run for 1 or 2 hours on RPi. If you are doing that using ssh connection, you may want to install screen: It will allow you to close the ssh connection without killing the compilation process. See http://www.howtoforge.com/linux_screen

Those instructions have been tested with Node.js 0.10.2

See Also