Difference between revisions of "OSVehicle"

From eLinux.org
Jump to: navigation, search
(merged in one page)
(better formatting)
Line 9: Line 9:
 
TABBY EVO is a hardware open source platform for electric vehicles. Free to use, available to everyone. It’s the 2nd version of our platform: now it’s harder, better, faster and stronger. It is an open source framework for the creation of vehicles: it can be used to bootstrap businesses (electric vehicle startups), to create your own vehicle, for education purposes, and much more. By using it you can save a lot of millions of dollars and years of R&D. All the plans and blueprints can be downloaded in the website’s download section. You are welcome and encouraged to improve the designs, work on them, and upload them to share your ideas with the community through the OSV forum. Inspiration: Tabby cats are cute, sharp and very intelligent. Although other cats are also intelligent, these cats learn well to live with humans and enjoy their lives.
 
TABBY EVO is a hardware open source platform for electric vehicles. Free to use, available to everyone. It’s the 2nd version of our platform: now it’s harder, better, faster and stronger. It is an open source framework for the creation of vehicles: it can be used to bootstrap businesses (electric vehicle startups), to create your own vehicle, for education purposes, and much more. By using it you can save a lot of millions of dollars and years of R&D. All the plans and blueprints can be downloaded in the website’s download section. You are welcome and encouraged to improve the designs, work on them, and upload them to share your ideas with the community through the OSV forum. Inspiration: Tabby cats are cute, sharp and very intelligent. Although other cats are also intelligent, these cats learn well to live with humans and enjoy their lives.
  
Performance
+
'''Performance'''
 
+
* Performance numbers are for research and testing purposes only and may vary.
Performance numbers are for research and testing purposes only and may vary.
+
Top Speed
Top Speed Depends on the bodywork 100 Km/h (62 mph), platform only 129 Km/h (80 mph), but depends on the bodywork and low Cx coefficient Max Range on standard batteries Depends on the bodywork 80 Km (50 mi), platform only 120 Km (75 mi), but depends on the bodywork and low Cx coefficient Max Climb* Stable at 25%
+
Depends on the bodywork
 
+
100 Km/h (62 mph), platform only
Depends on final vehicle weight
+
129 Km/h (80 mph), but depends on the bodywork and low Cx coefficient
Approach and departure angles* Approach angle: 35 degrees Departure angle: N/A (wheels are behind the chassis)
+
Max Range on standard batteries
 +
Depends on the bodywork
 +
80 Km (50 mi), platform only
 +
120 Km (75 mi), but depends on the bodywork and low Cx coefficient
 +
Max Climb*
 +
Stable at 25%
 +
* Depends on final vehicle weight
 +
Approach and departure angles*
 +
Approach angle: 35 degrees
 +
Departure angle: N/A (wheels are behind the chassis)
 +
* Note: Platform only, numbers will change with weight and exterior body designs
  
 
Note: Platform only, numbers will change with weight and exterior body designs
 
Note: Platform only, numbers will change with weight and exterior body designs
Dimensions & Wieights 2 seats Dimension: (mm) 2330 x 1488 x 1380 | (in): 91.73 x 58.58 x 54.33 Weight (batteries included): (kg) 520 | (lb): 1.146,4 Weight without batteries: (kg) 380 | (lb): 837,75 Wheel base: (mm) 1650 | (in): 64.96 Dimension & weight assembled including batteries and wooden crates: Dimension: (mm) 2540 (L) x 1670 (W) x 1500 (H) | (in) 100.00 x 65.75 x 59.06 (H) Platform weight: (kg) 570 | (lb) 1,256.6 Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H) Batteries weight: (kg) 215 | (lb) 474 4 seats Dimension (mm): 3033 x 1488 x 1380 | (in): 119.4 x 58.58 x 54.33 Weight (batteries included): (kg) 570 | (lb): 1.256.6 Weight without batteries: (kg) 430 | (lb): 948 Wheel base (mm): 2350 | (in): 92.52 Dimension & weight assembled including wooden crates: Dimension: (mm) 3240 (L) x 1670 (W) x 1500 (H) | (in) 127.6 (L) x 65.75 (W) x 59.06 (H) Platform weight: (kg) 670 | (lb) 1,477.1 Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H) Batteries weight: (kg) 215 | (lb) 474
+
'''Dimensions & Weights'''
 +
2 seats
 +
Dimension: (mm) 2330 x 1488 x 1380 | (in): 91.73 x 58.58 x 54.33
 +
Weight (batteries included): (kg) 520 | (lb): 1.146,4
 +
Weight without batteries: (kg) 380 | (lb): 837,75
 +
Wheel base: (mm) 1650 | (in): 64.96
 +
Dimension & weight assembled including batteries and wooden crates:
 +
Dimension: (mm) 2540 (L) x 1670 (W) x 1500 (H) | (in) 100.00 x 65.75 x 59.06 (H)
 +
Platform weight: (kg) 570 | (lb) 1,256.6
 +
Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H)
 +
Batteries weight: (kg) 215 | (lb) 474
 +
4 seats
 +
Dimension (mm): 3033 x 1488 x 1380 | (in): 119.4 x 58.58 x 54.33
 +
Weight (batteries included): (kg) 570 | (lb): 1.256.6
 +
Weight without batteries: (kg) 430 | (lb): 948
 +
Wheel base (mm): 2350 | (in): 92.52
 +
Dimension & weight assembled including wooden crates:
 +
Dimension: (mm) 3240 (L) x 1670 (W) x 1500 (H) | (in) 127.6 (L) x 65.75 (W) x 59.06 (H)
 +
Platform weight: (kg) 670 | (lb) 1,477.1
 +
Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H)
 +
Batteries weight: (kg) 215 | (lb) 474
  
Components Chassis Technology: welded and screwed tubes Material: steel S235JR – Painted frame Assembled chassis weight: 105 kg (2 seats) – 130 kg (4 seats) Steering system Rack and pinion Turn radius: 4m (2-seat), 5m (4-seat) Power steering: optional (surcharge) Braking system Front and rear disc brakes Regenerative braking configured at 10% to prevent abrupt slowdowns ABS system: optional (surcharge) Suspension systems Front and rear McPherson Wheels Rims: steel Tires: 175/55R15 Pirelli P1 “green” tires (low rolling friction) Safety Equipment Emergency switch Roll-bar not included (due to impact on final vehicle design) Other mandatory safety systems depends on the final design of customer
+
'''Components'''
 +
Chassis
 +
Technology: welded and screwed tubes
 +
Material: steel S235JR – Painted frame
 +
Assembled chassis weight: 105 kg (2 seats) – 130 kg (4 seats)
 +
Steering system
 +
Rack and pinion
 +
Turn radius: 4m (2-seat), 5m (4-seat)
 +
Power steering: optional (surcharge)
 +
Braking system
 +
Front and rear disc brakes
 +
Regenerative braking configured at 10% to prevent abrupt slowdowns
 +
ABS system: optional (surcharge)
 +
Suspension systems
 +
Front and rear McPherson
 +
Wheels
 +
Rims: steel
 +
Tires: 175/55R15 Pirelli P1 “green” tires (low rolling friction)
 +
Safety Equipment
 +
Emergency switch
 +
Roll-bar not included (due to impact on final vehicle design)
 +
Other mandatory safety systems depends on the final design of customer
  
Powertrain Electric motor AC asynchronous high performance electric motor Rated voltage: 80Vac Rated power: 19kW Rated current: 235A Max current: 400A (electronically limited) Max power: 29,5kW @ 2500 rpm Max torque: 128Nm @ 500 rpm Max efficiency: 91,97% @ 5000 rpm Max power factor: 0,97 TABBY-EVO_power_torque DC/DC converter 80/12 100W Motor controller Vector control Reduction gearbox ratio 5,8:1 Drive shaft Front wheel drive
+
'''Powertrain'''
 +
Electric motor
 +
AC asynchronous high performance electric motor
 +
Rated voltage: 80Vac
 +
Rated power: 19kW
 +
Rated current: 235A
 +
Max current: 400A (electronically limited)
 +
Max power: 29,5kW @ 2500 rpm
 +
Max torque: 128Nm @ 500 rpm
 +
Max efficiency: 91,97% @ 5000 rpm
 +
Max power factor: 0,97
 +
TABBY-EVO_power_torque
 +
DC/DC converter
 +
80/12 100W
 +
Motor controller
 +
Vector control
 +
Reduction gearbox ratio
 +
5,8:1
 +
Drive shaft
 +
Front wheel drive
  
Battery Battery pack 24 elements LIFePO4, 160Ah, 82V (12,8 kWh of stored energy) Single element: 3.4V, 160Ah Battery life: 5,000 charges at 80% Depth of Discharge Battery charger Input: 220V 10A – Output: 80V 25A Charge time: up to 7 hours at input voltage and current Battery Management System Max voltage: 93V Phase 1: required current 100% Phase 2: required current 50% Balance cells phase: required current 14% Passive control
+
'''Battery'''
 +
Battery pack
 +
24 elements LIFePO4, 160Ah, 82V (12,8 kWh of stored energy)
 +
Single element: 3.4V, 160Ah
 +
Battery life: 5,000 charges at 80% Depth of Discharge
 +
Battery charger
 +
Input: 220V 10A – Output: 80V 25A
 +
Charge time: up to 7 hours at input voltage and current
 +
Battery Management System
 +
Max voltage: 93V
 +
Phase 1: required current 100%
 +
Phase 2: required current 50%
 +
Balance cells phase: required current 14%
 +
Passive control
  
 
=== Resources ===
 
=== Resources ===

Revision as of 13:42, 30 June 2016

OSVehicle is a project to create an OpenSource car platform that it can be a perfect to run a GNU/Linux system on it

Topic of interest

Specifications

TABBY EVO is a hardware open source platform for electric vehicles. Free to use, available to everyone. It’s the 2nd version of our platform: now it’s harder, better, faster and stronger. It is an open source framework for the creation of vehicles: it can be used to bootstrap businesses (electric vehicle startups), to create your own vehicle, for education purposes, and much more. By using it you can save a lot of millions of dollars and years of R&D. All the plans and blueprints can be downloaded in the website’s download section. You are welcome and encouraged to improve the designs, work on them, and upload them to share your ideas with the community through the OSV forum. Inspiration: Tabby cats are cute, sharp and very intelligent. Although other cats are also intelligent, these cats learn well to live with humans and enjoy their lives.

Performance

  • Performance numbers are for research and testing purposes only and may vary.

Top Speed Depends on the bodywork 100 Km/h (62 mph), platform only 129 Km/h (80 mph), but depends on the bodywork and low Cx coefficient Max Range on standard batteries Depends on the bodywork 80 Km (50 mi), platform only 120 Km (75 mi), but depends on the bodywork and low Cx coefficient Max Climb* Stable at 25%

  • Depends on final vehicle weight

Approach and departure angles* Approach angle: 35 degrees Departure angle: N/A (wheels are behind the chassis)

  • Note: Platform only, numbers will change with weight and exterior body designs

Note: Platform only, numbers will change with weight and exterior body designs Dimensions & Weights 2 seats Dimension: (mm) 2330 x 1488 x 1380 | (in): 91.73 x 58.58 x 54.33 Weight (batteries included): (kg) 520 | (lb): 1.146,4 Weight without batteries: (kg) 380 | (lb): 837,75 Wheel base: (mm) 1650 | (in): 64.96 Dimension & weight assembled including batteries and wooden crates: Dimension: (mm) 2540 (L) x 1670 (W) x 1500 (H) | (in) 100.00 x 65.75 x 59.06 (H) Platform weight: (kg) 570 | (lb) 1,256.6 Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H) Batteries weight: (kg) 215 | (lb) 474 4 seats Dimension (mm): 3033 x 1488 x 1380 | (in): 119.4 x 58.58 x 54.33 Weight (batteries included): (kg) 570 | (lb): 1.256.6 Weight without batteries: (kg) 430 | (lb): 948 Wheel base (mm): 2350 | (in): 92.52 Dimension & weight assembled including wooden crates: Dimension: (mm) 3240 (L) x 1670 (W) x 1500 (H) | (in) 127.6 (L) x 65.75 (W) x 59.06 (H) Platform weight: (kg) 670 | (lb) 1,477.1 Batteries: (mm) 880 (L) x 830 (W) x 590 (H) | (in) 34.65 (L) x 32.68 (W) x 23.23 (H) Batteries weight: (kg) 215 | (lb) 474

Components Chassis Technology: welded and screwed tubes Material: steel S235JR – Painted frame Assembled chassis weight: 105 kg (2 seats) – 130 kg (4 seats) Steering system Rack and pinion Turn radius: 4m (2-seat), 5m (4-seat) Power steering: optional (surcharge) Braking system Front and rear disc brakes Regenerative braking configured at 10% to prevent abrupt slowdowns ABS system: optional (surcharge) Suspension systems Front and rear McPherson Wheels Rims: steel Tires: 175/55R15 Pirelli P1 “green” tires (low rolling friction) Safety Equipment Emergency switch Roll-bar not included (due to impact on final vehicle design) Other mandatory safety systems depends on the final design of customer

Powertrain Electric motor AC asynchronous high performance electric motor Rated voltage: 80Vac Rated power: 19kW Rated current: 235A Max current: 400A (electronically limited) Max power: 29,5kW @ 2500 rpm Max torque: 128Nm @ 500 rpm Max efficiency: 91,97% @ 5000 rpm Max power factor: 0,97 TABBY-EVO_power_torque DC/DC converter 80/12 100W Motor controller Vector control Reduction gearbox ratio 5,8:1 Drive shaft Front wheel drive

Battery Battery pack 24 elements LIFePO4, 160Ah, 82V (12,8 kWh of stored energy) Single element: 3.4V, 160Ah Battery life: 5,000 charges at 80% Depth of Discharge Battery charger Input: 220V 10A – Output: 80V 25A Charge time: up to 7 hours at input voltage and current Battery Management System Max voltage: 93V Phase 1: required current 100% Phase 2: required current 50% Balance cells phase: required current 14% Passive control

Resources