Optocape

From eLinux.org
Revision as of 14:48, 26 October 2017 by Deandzines (talk | contribs) (Created page with "==Description== border|right|link=|300px|Optocape V0.1 Optocape is a simple Machine Interface cape for BeagleBone Black. Originally it was des...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

Optocape V0.1

Optocape is a simple Machine Interface cape for BeagleBone Black.

Originally it was designed for a miniature CNC Milling machine based on many 3D printer projects. While the 3D printer capes provided enough signals, the larger motors required isolated power supplies. Optocape was designed for a four axis machine, and also provides hardware for a resistive touchscreen panel.

Nothing about the cape is CNC specific. It can be used in many applications requiring isolated I/O and a big touchscreen.


Features

  • 15 high-speed outputs (isolated)
  • 10 high-speed inputs (isolated)
  • UART TX RX (isolated)
  • 4 opto relay outputs (500mA)
  • 12 bit color LVDS video (CMOS)
  • 4 analog inputs (CMOS)


Mechanical Specifications

Size 3.14x3.15 inches
Layers 2
PCB Thickness .063 inches
RoHS Compliant Yes


Connections

Optocape Pin Usage

Inputs

This cape was originally designed for a CNC milling machine. The I/O was designed to accomidate four axis with step, direction, enable, limit switches, spindle, LED light and more.

Outputs

The signal outputs are divided into five sections. Each section is powered through seperate V and GND nets, allowing the BeagleBone and each section to opperate from seperate power supplies.

In addition to the signal outputs there are four on-board opto relays, rated up to 500mA.

Pin 9.25 is connected to an on-board indicator LED.

Pins 9.11 and 9.13 are connectord to dedicated Tx/Rx optos for serial communication (BBB UART4).

GUI

The cape includes a LVDS serializer compatible with many flatscreen LCD panels. The cable is not included and varies depending on your LCD. The mating connector is a 2MM header (14 pin, 2 rows).

Four-wire touchscreen is supported through pins A0-A3 of the beaglebone black.

The screen and analog pins are at CMOS level powered by BBB VSYS, and are ESD sensitive. Use caution if the LCD backlight uses a high voltage flourescent. LED backlights are preferred, and can be switch on/off by the on-board relays.


Software

Device Tree

EEPROM Support No
Part Number BB-OPTOCAPE1
Version 00A0

Documentation

Open Source Yes
System Reference Manual Yes
Schematics Yes
PCB Files Yes
Gerber Files Yes
Bills of Materials No

Vendors

Tindie


To go back to the cape list, please click BeagleBone Capes