PWM Cape

From eLinux.org
Revision as of 11:06, 9 December 2013 by Djackson (talk | contribs) (Created page with "==Descriptions== Picture Coming Soon The PWM Cape provides 32 channels of PWM output, addressed over an I2C interface. The three pin connectors are wired in a standard servo p...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Descriptions

Picture Coming Soon The PWM Cape provides 32 channels of PWM output, addressed over an I2C interface. The three pin connectors are wired in a standard servo pinout, and power to the connectors can be provided from a screw terminal block on the end of the board.

Revision Changes

Revision A1

Initial release of PWM Cape.

Software Support & Compatibility

The PWM Cape is addressed via I2C. Pullups to the I2C bus are provided on the board.


Specifications

Followings are some specifications of the PWM Cape:

Mechanical Specifications

Size 2.15" x 2.825"
Layers 2
PCB Thickness .062"
RoHS Compliant Yes



Signal Usage

MiniDisplay Cape
Power VDD_5V
GND

Distributors

Please visit Where To Buy for a list of distributors who carry BeagleBoardToys' capes.



Product Images

Coming Soon



Documentations

PWM Cape Revision A1

Coming soon.