Panda How to add Power Switch

From eLinux.org
Revision as of 13:27, 30 April 2011 by KenMcGuire (talk | contribs)
Jump to: navigation, search

Introduction

  • The J6 expansion header on the PandaBoard allows for the addition of a power switch.

This is a Work In Progress, don't go by anything below this line.


Materials

These are the materials you will need in addition to your Pandaboard.


Header.jpg

Pinout

  • J6 Pinout

J6 detail1.jpg

Assembly

Here is what the header will look like when soldered to J6 of the Pandaboard.

  • Solder the header into the J6 pins closest to the WIFI module
  • Detail of the header soldered into J6

Board1.jpg


Notes

  • First few pins of J6

600x