Parallella VerifiedPeripherals

From eLinux.org
Revision as of 09:59, 18 May 2014 by Gravis (talk | contribs)
Jump to: navigation, search
Important Notices
Warning Warning: Using non-standards compliant powered USB hubs may damage the Parallella!
Check the list of all certified USB hubs before plugging in your USB hub.

Related forum posts:

Guidance

  1. Where additional information may prove useful, please include this, e.g. requires a powered USB hub, only works with Kernel vN etc.
  2. Where a peripheral has proven to be problematic, please add a sub-section for problem hardware if it doesn't already exist and note down a few details there.
  3. If you'd like to notify others you can also post details to the forum topic.

Power supplies

Voltage: 5 Volts
Current: 2 Amps / 2000 mA (minimum)
Connector Type: Barrel
Barrel Size: 5mm with a 2.1mm center
Polarity: Center-positive

Micro SD

  • SanDisk MicroSDHC 8GB, Class 4
  • SanDisk MicroSDHC Ultra 16GB, Class 10
  • Kingston Digital SDC4/32GB-AMZ

Powered hubs

Keyboards

Pointing devices

WLAN

Bluetooth

Cellular (GSM/GPRS/3G

Ethernet

Sound cards

Webcams

Video/frame grabbers

GPS

Serial

Unsuitable

  • Anything using the RS-232 or RS-423 standards, as these have larger and negative voltages.
  • PC serial port or replacement adapter. These can often be identified by a 9-pin D shaped socket.
  • Directly connecting to USB or Ethernet. An adapter is needed!

Parallel adapters

IDE/SATA adapters

HDMI

Ethernet