Difference between revisions of "R-Car/Boards/CCPF-SK/Yocto-Gen3/v5.1.0"

From eLinux.org
Jump to: navigation, search
(Introduction)
(Building the BSP for CCPF-SK)
Line 69: Line 69:
 
* MMP is minimal BSP which contains GFX/MMP evaluation package.
 
* MMP is minimal BSP which contains GFX/MMP evaluation package.
 
* MMP-dist is MMP + some additional packages(For debug, development, benchmark, and so on).
 
* MMP-dist is MMP + some additional packages(For debug, development, benchmark, and so on).
 +
* MMP-dist release package is distributed on [[R-Car/Boards/CCPF-SK/GettingStarted]]
  
 
=== MMP case ===
 
=== MMP case ===

Revision as of 03:23, 28 September 2021


Introduction

This page contains information abot building and running Yocto on:

If prebuilt binary of Yocto BSP is needed, please refer to the following:

Topic

EOL Notification of the M3SK

Production of M3SK is discontinued.
See M3SK page for detail.

The new version of R-Car Starter Kit Premier is now on sale !!

  • Equipped with R-Car H3e-2G
    (En) https://www.renesas.com/jp/en/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Zh) https://www.renesas.com/jp/zh/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Jp) https://www.renesas.com/jp/ja/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
  • CPU performance is increased 20% by supporting up to 2GHz frequency over past products.
  • You can buy from here.

SW Release Information

Board name SW name Release date Note
R-Car Starter Kit ( Premier / Pro ) Yocto v5.9.4 (stable) [New!!] 2024/03/28
Kingfisher Infotainment Board Yocto v5.9.0 (stable) 2022/02/14 To check for latest information, please refer to the meta-rcar/tree/v5.9.0.
Android 10 (stable) 2021/07/26 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/11/25.
Android P (stable) 2020/09/29 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/03/16.
CCPF-SK Board Yocto v5.9.0 (stable) 2022/02/08 Prebuilt binary is available in Quick startup guide page. (Updated on 2022/03/18)


Software revisions

Software Revision
Yocto Project 3.1.4
aarch64-poky-linux-gcc (GCC) 9.3
Wayland/Weston 1.18.0/8.0.0
GStreamer 1.16.3
Kernel Ver 5.10
Userland 64/32bit 64
U-Boot 2020.10
OP_TEE 3.8.0
OpenGL ES 3.2

Host PC

Ubuntu 18.04/20.04 LTS (64bit) is recommended as OS. 32bit version is not supported.

Required packages

  1. Download evaluation version of proprietary graphics and multimedia drivers from Renesas.
    To download Multimedia and Graphics library and related Linux drivers, please use the following link:
    Download two files:
    • R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210428.zip
    • R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210428.zip

    Graphic drivers are required for Wayland. Multimedia drivers are optional.
  2. Install required packages
    sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
    build-essential chrpath socat cpio python3 python3-pip python3-pexpect \
    xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa \
    libsdl1.2-dev pylint3 xterm
    
    Refer to Yocto Project Quick Start for more information.

Building the BSP for CCPF-SK

What is different between "MMP" and "MMP-dist".

  • MMP is minimal BSP which contains GFX/MMP evaluation package.
  • MMP-dist is MMP + some additional packages(For debug, development, benchmark, and so on).
  • MMP-dist release package is distributed on R-Car/Boards/CCPF-SK/GettingStarted

MMP case

Using build script

  1. Directory Structure
    |--build.sh
    `--proprietary
       |--R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210428.zip
       `--R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210428.zip
    
  2. Build script(build.sh)
    '''build script'''
    
  3. build
    ./build.sh <target_board_name>
    
    18px <translate> Note:</translate> target_board_name is "h3ulcb" or "m3ulcb".
    If the build completes successfully, all the necessary files are generated in a following directory:
    ./<target_board_name>/build/tmp/deploy/images/<target_board_name>
    

Manual steps

  1. Create a directory and switch to it
    Warning! Yocto builds require a lot of disk space (up to 100 GB). Make sure you have got enough before starting the build.
    mkdir build
    cd build
    export WORK=`pwd`
    
  2. Clone basic Yocto layers:
    cd $WORK
    git clone git://git.yoctoproject.org/poky
    git clone git://git.openembedded.org/meta-openembedded
    git clone git://github.com/renesas-rcar/meta-renesas
    git clone git://github.com/renesas-rcar/meta-renesas-ccpf
    
  3. Switch to proper branches/commits
    cd $WORK/poky
    git checkout -b tmp 424296bf9bb4bae27febf91bce0118df09ce5fa1
    cd $WORK/meta-openembedded
    git checkout -b tmp f2d02cb71eaff8eb285a1997b30be52486c160ae
    cd $WORK/meta-renesas
    git checkout -b tmp fd8ab2bb1b5ca98483c6f4aecf09a85c4d6bc016
    cd $WORK/meta-renesas-ccpf
    git checkout -b tmp xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    
    Another versions are not tested for compatibility.
  4. Apply patch to update meta-rcar(patch file: File:Update-meta-rcar-for-Yv510-20210531.patch.zip)
    cd ${WORK}
    curl -sO https://elinux.org/images/6/6a/Update-meta-rcar-for-Yv510-20210531.patch.zip
    unzip -qo Update-meta-rcar-for-Yv510-20210531.patch.zip
    cd ${WORK}/meta-renesas
    patch -N -p1 < ../Update-meta-rcar-for-Yv510-20210531.patch
    
  5. Create $WORK/../proprietary folder, then download proprietary driver modules to it.
    See also Required_packages
    You should see the following files:
    $ ls -1 $WORK/../proprietary/*.zip
    R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210428.zip
    R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210428.zip
    
  6. Populate meta-renesas with proprietary software packages.
    export PKGS_DIR=$WORK/../proprietary
    cd $PKGS_DIR
    unzip -qo R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210428.zip 
    unzip -qo R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210428.zip
    cd $WORK/meta-renesas
    sh meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh -f $PKGS_DIR
    unset PKGS_DIR
    
  7. Setup build environment
    cd $WORK
    TEMPLATECONF=$PWD/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/<h3ulcb|m3ulcb>-ccpf-sk/mmp/ \
        source poky/oe-init-build-env ${WORK}/build
    
  8. Start the build
    bitbake core-image-weston
    
  9. Building image can take up to a few hours depending on your host system performance.
    After the build has been completed successfully, you should see the output similar to:
    NOTE: Tasks Summary: Attempted 4704 tasks of which 31 didn't need to be rerun and all succeeded.
    
    and the command prompt should return.
  10. Bitbake has generated all the necessary files in ./tmp/deploy/images directory.
    You can verify its content:
    -> % ls -1 `find ./tmp/deploy/images/h3ulcb/ -maxdepth 1 -type l -print`
    '''Log'''
    
    Image is a Kernel image, *.dtb is a blob file, core-image-<image_type>-<board_name>.tar.bz2 is the rootfs, modules-<board_name>.tgz are kernel modules.
  11. You can now proceed with running Yocto images

MMP-dist case

build script

  1. Build script(build.sh)
    '''build script'''
    


MMP-dist release package case

build script

  1. Build script(build.sh)
    '''build script'''
    


Build SDK

Refer to Build SDK on the Yocto-Gen3 page.

Running Yocto images

Refer to Running Yocto images on the Yocto-Gen3 page.

Relationship diagram between each SK board and DTB file

Board name SoC version DTB file
H3SK 2.0/3.0 r8a77951-ulcb-ccpf-sk.dtb
M3SK 1.0 r8a77960-ulcb-ccpf-sk.dtb
M3SK 3.0 r8a77961-ulcb-ccpf-sk.dtb

S/W support status

Support list

Functions Status
CAN ok
USB2.0 ok
USB3.0 ok
HDMI1(only H3SK) ok
Camera 0 Not supported
Camera 1 Not supported
NVMe ok
S2RAM(Suspend to RAM) ok

Note:

"ok" - Function succeeded in the simple test as below.
"NT" - Function wasn't tested
Please connect USB 3.0 device to USB 3.0 port and USB2.0 device to USB 2.0 port.

How to test some capabilities

CAN

ip link set can0 up type can bitrate 125000
ip link set can1 up type can bitrate 125000

candump can0&
cangen can1 -I i -L i -D i


NVMe

root@h3ulcb:~# dmesg | grep nvme
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
nvme nvme1: pci function 0001:01:00.0
nvme 0001:01:00.0: enabling device (0000 -> 0002)
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme1: 8/0/0 default/read/poll queues
root@h3ulcb:~# mount /dev/nvme1n1p1 /mnt
EXT4-fs (nvme1n1p1): mounted filesystem with ordered data mode. Opts: (null)

S2RAM

Push SW6 or execute 'systemctl suspend' to enter Suspend to RAM. it can wake-up by SW4.

Known issues and limitations

  1. Refer to R-Car/Boards/CCPF-SK#Known_Issues.
  2. Refer to R-Car/Boards/Yocto-Gen3/v5.1.0#Known_issues_and_limitations.


Q&A site

https://community.renesas.com/automotive/r-car-h3-m3-cockpit/

FAQ site