Difference between revisions of "R-Car/Boards/CCPF-SK/Yocto-Gen3/v5.5.0"

From eLinux.org
Jump to: navigation, search
(fan control)
(fan control)
Line 485: Line 485:
  
 
==== fan control ====
 
==== fan control ====
To use the fan control function, <span style="color:#ff0000;">[https://elinux.org/R-Car/Boards/CCPF-SK#How to upgrade RL78 RL78] needs to be updated<span/>.<br/>
+
To use the fan control function, <span style="color:#ff0000;">[https://elinux.org/R-Car/Boards/CCPF-SK#How_to_upgrade_RL78 RL78] needs to be updated<span/>.<br/>
 
{|
 
{|
 
|-
 
|-

Revision as of 01:38, 20 December 2021


Introduction

This page contains information abot building and running Yocto on:

If prebuilt binary of Yocto BSP is needed, please refer to the following:

Topic

The new version of R-Car Starter Kit Premier is now on sale !!

  • Equipped with R-Car H3e-2G
    (En) https://www.renesas.com/jp/en/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Zh) https://www.renesas.com/jp/zh/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Jp) https://www.renesas.com/jp/ja/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
  • CPU performance is increased 20% by supporting up to 2GHz frequency over past products.
  • You can buy from here.

SW Release Information

Board name SW name Release date Note
R-Car Starter Kit ( Premier / Pro ) Yocto v5.9.0 (stable) [New!!] 2022/02/08
Kingfisher Infotainment Board Yocto v5.9.0 (stable) [New!!] 2022/02/14 To check for latest information, please refer to the meta-rcar/tree/v5.9.0.
Android 10 (stable) 2021/07/26 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/11/25.
Android P (stable) 2020/09/29 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/03/16.
CCPF-SK Board Yocto v5.9.0 (latest) [New!!] 2022/02/08 Prebuilt binary is available in Quick startup guide page. (Updated on 2022/03/18)


Software revisions

Software Revision
Yocto Project 3.1.8
aarch64-poky-linux-gcc (GCC) 9.3
Wayland/Weston 1.18.0/8.0.0
GStreamer 1.16.3
Kernel Ver 5.10.41
Userland 64/32bit 64
U-Boot 2020.10
OP_TEE 3.13.0
OpenGL ES 3.2

Environment

Host PC

Ubuntu 18.04/20.04 LTS (64bit) is recommended as OS. 32bit version is not supported.

Confirmed Board

Board SoC Confirmed
R-Car Starter Kit Premier H3e-2G v3.0 OK
R-Car Starter Kit Premier H3 v3.0 (1rank DDR) OK
R-Car Starter Kit Premier H3 v3.0 (2rank DDR) NT
R-Car Starter Kit Premier H3 v2.0 with 8GB DDR NT
R-Car Starter Kit Premier H3 v2.0 with 4GB DDR NT
R-Car Starter Kit Pro M3 v3.0 OK
R-Car Starter Kit Pro M3 v1.0 NT

18px <translate> Note:</translate> NT='Not Tested'

See also:

Required packages

  1. Download evaluation version of proprietary graphics and multimedia drivers from Renesas.
    To download Multimedia and Graphics library and related Linux drivers, please use the following link:
    Download two files:
    • R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip
    • R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip

    Graphic drivers are required for Wayland. Multimedia drivers are optional.
  2. Install required packages
    sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
    build-essential chrpath socat cpio python3 python3-pip python3-pexpect \
    xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa \
    libsdl1.2-dev pylint3 xterm
    
    Refer to Yocto Project Quick Start for more information.

Building the BSP for CCPF-SK

What is different between "MMP" and "MMP-dist".

  • MMP is minimal BSP which contains GFX/MMP evaluation package.
  • MMP-dist is MMP + some additional packages(For debug, development, benchmark, and so on).
  • MMP-dist release package(core-image-weston-release) is distributed on R-Car/Boards/CCPF-SK/GettingStarted

MMP case

Using build script

  1. Directory Structure
    |--build.sh
    `--proprietary
       |--R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip
       `--R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip
    
  2. Build script(build.sh)
    #!/bin/bash
    
    BOARD_LIST=("h3ulcb" "m3ulcb")
    TARGET_BOARD=$1
    PROPRIETARY_DIR=`pwd`/proprietary
    WORK=`pwd`/${TARGET_BOARD}
    
    POKY_COMMIT=6ebb33bdaccaeadff0c85aab27acf35723df00d8
    META_OE_COMMIT=c38d2a74f762a792046f3d3c377827b08aade513
    META_RENESAS_COMMIT=0fe77668f5d9a31a5d10449988c3d8fb8dc475c5
    META_RENESAS_CCPF_COMMIT=b49b57d6e68d5cda70aefbed34e06903484c573b
    
    GFX_MMP_LIB=R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip
    GFX_MMP_DRIVER=R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip
    
    Usage () {
        echo "Usage: $0 \${TARGET_BOARD_NAME}"
        echo "BOARD_NAME list: "
        for i in ${BOARD_LIST[@]}; do echo "  - $i"; done
        echo "BUILD_DIR is $BUILD_TYPE"
        exit
    }
    
    # Check Param.
    if ! `IFS=$'\n'; echo "${BOARD_LIST[*]}" | grep -qx "${TARGET_BOARD}"`; then
        Usage
    fi
    
    mkdir -p ${WORK}
    cd ${WORK}
    
    # Clone basic Yocto layers in parallel
    git clone git://git.yoctoproject.org/poky &
    git clone git://git.openembedded.org/meta-openembedded &
    git clone https://github.com/renesas-rcar/meta-renesas &
    git clone https://github.com/renesas-rcar/meta-renesas-ccpf &
    
    # Wait for all clone operations
    wait
    
    # Switch to proper branches/commits
    cd ${WORK}/poky
    git checkout -b tmp ${POKY_COMMIT}
    cd ${WORK}/meta-openembedded
    git checkout -b tmp ${META_OE_COMMIT}
    cd ${WORK}/meta-renesas
    git checkout -b tmp ${META_RENESAS_COMMIT}
    cd ${WORK}/meta-renesas-ccpf
    git checkout -b tmp ${META_RENESAS_CCPF_COMMIT}
    
    # Populate meta-renesas with proprietary software packages
    WORK_PROP_DIR=${WORK}/proprietary
    mkdir -p ${WORK_PROP_DIR}
    unzip -qo ${PROPRIETARY_DIR}/${GFX_MMP_LIB} -d ${WORK_PROP_DIR}
    unzip -qo ${PROPRIETARY_DIR}/${GFX_MMP_DRIVER} -d ${WORK_PROP_DIR}
    cd ${WORK}/meta-renesas
    sh meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh -f ${WORK_PROP_DIR}
    
    cd ${WORK}
    TEMPLATECONF=$PWD/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/${TARGET_BOARD}-ccpf-sk/mmp/ \
        source poky/oe-init-build-env ${WORK}/build
    
    bitbake core-image-weston
    
  3. build
    ./build.sh <target_board_name>
    
    18px <translate> Note:</translate> target_board_name is "h3ulcb" or "m3ulcb".
    If the build completes successfully, all the necessary files are generated in a following directory:
    ./<target_board_name>/build/tmp/deploy/images/<target_board_name>
    

Manual steps

  1. Create a directory and switch to it
    Warning! Yocto builds require a lot of disk space (up to 100 GB). Make sure you have got enough before starting the build.
    mkdir build
    cd build
    export WORK=`pwd`
    
  2. Clone basic Yocto layers:
    cd $WORK
    git clone git://git.yoctoproject.org/poky
    git clone git://git.openembedded.org/meta-openembedded
    git clone https://github.com/renesas-rcar/meta-renesas
    git clone https://github.com/renesas-rcar/meta-renesas-ccpf
    
  3. Switch to proper branches/commits
    cd $WORK/poky
    git checkout -b tmp 6ebb33bdaccaeadff0c85aab27acf35723df00d8
    cd $WORK/meta-openembedded
    git checkout -b tmp c38d2a74f762a792046f3d3c377827b08aade513
    cd $WORK/meta-renesas
    git checkout -b tmp 0fe77668f5d9a31a5d10449988c3d8fb8dc475c5
    cd $WORK/meta-renesas-ccpf
    git checkout -b tmp b49b57d6e68d5cda70aefbed34e06903484c573b
    
    Another versions are not tested for compatibility.
  4. Create $WORK/../proprietary folder, then download proprietary driver modules to it.
    See also Required_packages
    You should see the following files:
    $ ls -1 $WORK/../proprietary/*.zip
    R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip
    R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip
    
  5. Populate meta-renesas with proprietary software packages.
    export PKGS_DIR=$WORK/../proprietary
    cd $PKGS_DIR
    unzip -qo R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip 
    unzip -qo R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip
    cd $WORK/meta-renesas
    sh meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh -f $PKGS_DIR
    unset PKGS_DIR
    
  6. Setup build environment
    cd $WORK
    TEMPLATECONF=$PWD/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/<h3ulcb|m3ulcb>-ccpf-sk/mmp/ \
        source poky/oe-init-build-env ${WORK}/build
    
  7. Start the build
    bitbake core-image-weston
    
  8. Building image can take up to a few hours depending on your host system performance.
    After the build has been completed successfully, you should see the output similar to:
    NOTE: Tasks Summary: Attempted 4704 tasks of which 31 didn't need to be rerun and all succeeded.
    
    and the command prompt should return.
  9. Bitbake has generated all the necessary files in ./tmp/deploy/images directory.
    You can verify its content:
    bash $ ls -1 `find ./tmp/deploy/images/h3ulcb/ -maxdepth 1 -type l -print`
    ./tmp/deploy/images/h3ulcb/Image
    ./tmp/deploy/images/h3ulcb/Image-h3ulcb.bin
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.ext4
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.manifest
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.tar.bz2
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.testdata.json
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.wic.bmap
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.wic.xz
    ./tmp/deploy/images/h3ulcb/core-image-weston-h3ulcb.wic.xz.sha256sum
    ./tmp/deploy/images/h3ulcb/modules-h3ulcb.tgz
    ./tmp/deploy/images/h3ulcb/r8a77950-ulcb-h3ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a77950-ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a77951-ulcb-ccpf-sk-h3ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a77951-ulcb-ccpf-sk.dtb
    ./tmp/deploy/images/h3ulcb/r8a77951-ulcb-h3ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a77951-ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a779m1-ulcb-h3ulcb.dtb
    ./tmp/deploy/images/h3ulcb/r8a779m1-ulcb.dtb
    ./tmp/deploy/images/h3ulcb/u-boot-elf-h3ulcb.srec
    ./tmp/deploy/images/h3ulcb/u-boot-h3ulcb.bin
    ./tmp/deploy/images/h3ulcb/u-boot-h3ulcb.bin-r8a7795_h3ulcb
    ./tmp/deploy/images/h3ulcb/u-boot-initial-env-h3ulcb-r8a7795_h3ulcb
    ./tmp/deploy/images/h3ulcb/u-boot-initial-env-r8a7795_h3ulcb
    ./tmp/deploy/images/h3ulcb/u-boot.bin
    ./tmp/deploy/images/h3ulcb/u-boot.bin-r8a7795_h3ulcb
    
    Image is a Kernel image, *.dtb is a blob file, core-image-<image_type>-<board_name>.tar.bz2 is the rootfs, modules-<board_name>.tgz are kernel modules.
  10. You can now proceed with running Yocto images

MMP-dist case

build script

  1. Build script(build.sh)
    #!/bin/bash
    
    BOARD_LIST=("h3ulcb" "m3ulcb")
    TARGET_BOARD=$1
    PROPRIETARY_DIR=`pwd`/proprietary
    WORK=`pwd`/${TARGET_BOARD}
    
    POKY_COMMIT=6ebb33bdaccaeadff0c85aab27acf35723df00d8
    META_OE_COMMIT=c38d2a74f762a792046f3d3c377827b08aade513
    META_RENESAS_COMMIT=0fe77668f5d9a31a5d10449988c3d8fb8dc475c5
    META_RENESAS_CCPF_COMMIT=b49b57d6e68d5cda70aefbed34e06903484c573b
    YOCTO_PROJECT_CODENAME="dunfell"
    META_BROWSER_COMMIT=157c2dcc26304edc2543e5f45e74daf70ef2b7a6 # m92
    META_CLANG_COMMIT=76c6751d721a4265e01bb71d8dc4fb46dca6602f
    META_PYTHON2_COMMIT=b901080cf57d9a7f5476ab4d96e56c30db8170a8
    
    GFX_MMP_LIB=R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-2021921.zip
    GFX_MMP_DRIVER=R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip
    
    Usage () {
        echo "Usage: $0 \${TARGET_BOARD_NAME}"
        echo "BOARD_NAME list: "
        for i in ${BOARD_LIST[@]}; do echo "  - $i"; done
        echo "BUILD_DIR is $BUILD_TYPE"
        exit
    }
    
    # Check Param.
    if ! `IFS=$'\n'; echo "${BOARD_LIST[*]}" | grep -qx "${TARGET_BOARD}"`; then
        Usage
    fi
    
    mkdir -p ${WORK}
    cd ${WORK}
    
    # Clone basic Yocto layers in parallel
    git clone git://git.yoctoproject.org/poky &
    git clone git://git.openembedded.org/meta-openembedded &
    git clone https://github.com/renesas-rcar/meta-renesas &
    git clone https://github.com/renesas-rcar/meta-renesas-ccpf &
    git clone git://github.com/OSSystems/meta-browser &
    git clone git://github.com/kraj/meta-clang -b ${YOCTO_PROJECT_CODENAME} &
    git clone git://git.openembedded.org/meta-python2 -b ${YOCTO_PROJECT_CODENAME} &
    
    # Wait for all clone operations
    wait
    
    # Switch to proper branches/commits
    cd ${WORK}/poky
    git checkout -b tmp ${POKY_COMMIT}
    cd ${WORK}/meta-openembedded
    git checkout -b tmp ${META_OE_COMMIT}
    cd ${WORK}/meta-renesas
    git checkout -b tmp ${META_RENESAS_COMMIT}
    cd ${WORK}/meta-renesas-ccpf
    git checkout -b tmp ${META_RENESAS_CCPF_COMMIT}
    cd ${WORK}/meta-browser
    git checkout -B tmp ${META_BROWSER_COMMIT}
    cd ${WORK}/meta-clang
    git checkout -B tmp ${META_CLANG_COMMIT}
    cd ${WORK}/meta-python2
    git checkout -B tmp ${META_PYTHON2_COMMIT}
    
    # Populate meta-renesas with proprietary software packages
    WORK_PROP_DIR=${WORK}/proprietary
    mkdir -p ${WORK_PROP_DIR}
    unzip -qo ${PROPRIETARY_DIR}/${GFX_MMP_LIB} -d ${WORK_PROP_DIR}
    unzip -qo ${PROPRIETARY_DIR}/${GFX_MMP_DRIVER} -d ${WORK_PROP_DIR}
    cd ${WORK}/meta-renesas
    sh meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh -f ${WORK_PROP_DIR}
    
    cd ${WORK}
    rm -rf ${WORK}/build/conf
    TEMPLATECONF=$PWD/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/${TARGET_BOARD}-ccpf-sk/mmp-dist/ \
        source poky/oe-init-build-env ${WORK}/build
    
    ulimit -n 8192
    
    bitbake core-image-weston
    
    ### For building binary package which is released on eLinux ###
    #cp -f ${WORK}/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/${TARGET_BOARD}-ccpf-sk/mmp-dist/site.conf.sample \
    #    ${WORK}/build/conf/site.conf
    #bitbake core-image-weston-release
    

18px <translate> Note:</translate> Building mmp-dist release package(core-image-weston-release)

If it needs to build core-image-weston-release, please uncomment following code in build script.
core-image-weston-release: See also R-Car/Boards/CCPF-SK/Yocto-Gen3/v5.5.0#Building_the_BSP_for_CCPF-SK.
#cp -f ${WORK}/meta-renesas-ccpf/meta-rcar-gen3/docs/sample/conf/${TARGET_BOARD}-ccpf-sk/mmp-dist/site.conf.sample \
#    ${WORK}/build/conf/site.conf
#bitbake core-image-weston-release
If the build completes successfully, all the necessary files are generated in a following directory:
./<target_board_name>/build/tmp/deploy/release/

Build SDK

Refer to Build SDK on the Yocto-Gen3 page.

Running Yocto images

Refer to Running Yocto images on the Yocto-Gen3 page.

Relationship diagram between each SK board and DTB file

Board name SoC version DTB file
H3SK 2.0
2.0
2.0/3.0
RTP0RC77951SKBX010SA00
RTP0RC77951SKBX010SA01
RTP0RC77951SKBX010SA03
r8a77951-ulcb.dtb
H3e-2G SK 3.0 RTP8J779M1ASKB0SK0SA003 r8a779m1-ulcb.dtb
M3SK 1.0 r8a77960-ulcb-ccpf-sk.dtb
M3SK 3.0 r8a77961-ulcb-ccpf-sk.dtb

S/W support status

Support list

Functions Status
CAN ok
USB2.0 ok
USB3.0 ok
HDMI1(only H3SK) ok
Camera 0 Not supported
Camera 1 Not supported
NVMe ok
S2RAM(Suspend to RAM) ok
fan control ok(May fail in NVMe connection state.)

Note:

"ok" - Function succeeded in the simple test as below.
"NT" - Function wasn't tested
Please connect USB 3.0 device to USB 3.0 port and USB2.0 device to USB 2.0 port.

How to test some capabilities

CAN

Ex.) loop back

connect pin2 and pin6, pin3 and pin7
CCPF-SK-CAN.png
root@h3ulcb:~# ip link set can0 up type can bitrate 125000
root@h3ulcb:~# ip link set can1 up type can bitrate 125000
root@h3ulcb:~# candump can0&
root@h3ulcb:~# cangen can1 -I i -L i -D i
(Ctrl+C)
root@h3ulcb:~# candump can1&
root@h3ulcb:~# cangen can0 -I i -L i -D i


NVMe

root@h3ulcb:~# dmesg | grep nvme
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
nvme nvme1: pci function 0001:01:00.0
nvme 0001:01:00.0: enabling device (0000 -> 0002)
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme1: 8/0/0 default/read/poll queues
root@h3ulcb:~# mount /dev/nvme0n1p1 /mnt
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
root@h3ulcb:~# ls /mnt
root@h3ulcb:~# umount /mnt
root@h3ulcb:~# mount /dev/nvme1n1p1 /mnt
EXT4-fs (nvme1n1p1): mounted filesystem with ordered data mode. Opts: (null)
root@h3ulcb:~# ls /mnt
root@h3ulcb:~# umount /mnt

S2RAM

Push SW6 or execute 'systemctl suspend' to enter Suspend to RAM. it can wake-up by SW4.

fan control

To use the fan control function, RL78 needs to be updated.

less than 35 degrees 0%
above 35 degrees and below 50 degrees 50%
above 50 degrees 100%

This function can be stopped by "systemctl stop ccpsk-control".

Known issues and limitations

  1. Refer to R-Car/Boards/CCPF-SK#Known_Issues.
  2. Refer to R-Car/Boards/Yocto-Gen3/v5.5.0#Known_issues_and_limitations.


Q&A site

https://renesasrulz.com/automotive/r-car-h3-m3-cockpit

FAQ site