R-Car/Boards/Eagle
Introduction
This is the Wiki for the Renesas R-Car V3M Eagle board (RTP0RC77970SEB0010S). Refer to the R-Car page for information about Renesas' R-Car SoC family.
Hardware
This section contains information about Condor Board hardware.
Board Layout
Hardware Features
TBD
Where to buy
TBD
Eagle Board Documentation
TBD
System with LVDS cameras
TBD
Quick Start
Build BSP images
Please follow these instruction to build BSP http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Building_the_BSP_for_Renesas_ADAS_boards:
At step 5,6 - skip these steps
At step 8 - replace this step with following:
cp $WORK/meta-rcar/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/*.conf ./conf/
At step 9,10,11 - skip these steps
At step 13 - replace this step with following:
bitbake core-image-minimal
At step 16 use following dtb image:
Image-r8a7797-eagle.dtb
NOTE: you can refer to http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_scripts_examples section and use scripts after adding append from steps 8,13
Build SDK
Please follow these instruction to build SDK http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_SDK
Flashing firmware
TBD
U-Boot Environment
Please follow these instruction to boot from network http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Loading_kernel_via_TFTP_and_rootfs_via_NFS
For Eagle board you must use the following dtb file:
Image-r8a7797-eagle.dtb Image-r8a7797-eagle-function.dtb
ADAS test applications
TBD