R-Car/Boards/Porter:BD101LCC1
< R-Car
Hardware
For detailed description, display and touchscreen datasheets and 'where to buy' information see Boundary Devices official web-site.
Connecting
To connect BD101LCC1 to Porter board 2 cables required:
- LVDS cable. The one provided with the display is suitable and should be connected to J14 on the display controller board and to CN30 on the Porter.
- Touchscreen and backlight cable. Should be connected to J14 on the display controller board and to I2C Touchscreen connector on the Porter. See the table below showing cable pin-to-pin connection scheme.
| Line name | BD101LCC1 (J15) pin # | Porter CN30 pin# |
|---|---|---|
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
| Example | Example | Example |
