Difference between revisions of "R-Car/Boards/Yocto-Gen3-CommonFAQ"

From eLinux.org
Jump to: navigation, search
(FAQ List: Rename category)
 
(7 intermediate revisions by one other user not shown)
Line 3: Line 3:
 
[[Category:R-Car]]
 
[[Category:R-Car]]
 
[[Category:R-Car Gen3]]
 
[[Category:R-Car Gen3]]
 +
 +
== <span style="color:#ff0000;">NOTE:This FAQ page moved [https://en-support.renesas.com/knowledgeBase/category/31363 here].</span> ==
  
 
== Introduction ==
 
== Introduction ==
Line 28: Line 30:
 
There is {{PAGESINCATEGORY:R-Car/FAQ/Gen3|pages}} FAQs now.  
 
There is {{PAGESINCATEGORY:R-Car/FAQ/Gen3|pages}} FAQs now.  
 
-->
 
-->
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "Error: ethernet@e6800000 address not set." is shown in U-boot. | The error message "Error: ethernet@e6800000 address not set." is shown in U-boot. ]]
+
 
 +
=== Board Specification ===
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I buy the board ? | Where can I buy the board ? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I buy the board ? | Where can I buy the board ? ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which dtb file is required to boot linux on the R-Car Starter Kit board ? | Which dtb file is required to boot linux on the R-Car Starter Kit board ?]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get the SA001 Camera. | How to get the SA001 Camera.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get the SA001 Camera. | How to get the SA001 Camera.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK). | I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK).]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK). | I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK).]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the recommended GPS antenna? | What is the recommended GPS antenna?]]
+
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the recommended GPS antenna? | What is the recommended GPS  
 +
antenna?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Does Starter Kit + Kingfisher support Suspend to RAM(S2R)? | Does Starter Kit + Kingfisher support Suspend to RAM(S2R)?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to repair Starter Kit which is broken by connecting 12V power? | Is it possible to repair Starter Kit which is broken by connecting 12V power?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I buy JTAG connector for R-Car Gen3 Starter Kit? | Where can I buy JTAG connector for R-Car Gen3 Starter Kit? ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the recommended Radio antenna? | What is the recommended Radio antenna?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is there LVDS panel which is recommended to use with Kingfisher? | Is there LVDS panel which is recommended to use with Kingfisher?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use multi-display on R-Car Gen3 Starter Kit. | How to use multi-display on R-Car Gen3 Starter Kit.]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use the CAN on R-Car Gen3 Starter Kit. | How to use the CAN on R-Car Gen3 Starter Kit.]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the output resolution of HDMI? | What is the output resolution of HDMI?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change the DDR frequency. | How to change the DDR frequency. ]]
 +
 
 +
=== Yocto(linux) ===
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "Error: ethernet@e6800000 address not set." is shown in U-boot. | The error message "Error: ethernet@e6800000 address not set." is shown in U-boot. ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which dtb file is required to boot linux on the R-Car Starter Kit board ? | Which dtb file is required to boot linux on the R-Car Starter Kit board ?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2 | Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2 | Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Bitbake is stopped with error even if evaluation packages are located correctly. | Bitbake is stopped with error even if evaluation packages are located correctly.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Bitbake is stopped with error even if evaluation packages are located correctly. | Bitbake is stopped with error even if evaluation packages are located correctly.]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Does Starter Kit + Kingfisher support Suspend to RAM(S2R)? | Does Starter Kit + Kingfisher support Suspend to RAM(S2R)?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to repair Starter Kit which is broken by connecting 12V power? | Is it possible to repair Starter Kit which is broken by connecting 12V power?]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is there a built binary somewhere? | Is there a built binary somewhere?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is there a built binary somewhere? | Is there a built binary somewhere?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to run the "Suspend to RAM" | How to run the "Suspend to RAM"]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to run the "Suspend to RAM" | How to run the "Suspend to RAM"]]
Line 44: Line 58:
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built. | Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built. | Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Does Yocto v4.1.0 support HS400? | Does Yocto v4.1.0 support HS400?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Does Yocto v4.1.0 support HS400? | Does Yocto v4.1.0 support HS400?]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can R-Car support a root file system of Ubuntu? | Can R-Car support a root file system of Ubuntu?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I buy JTAG connector for R-Car Gen3 Starter Kit? | Where can I buy JTAG connector for R-Car Gen3 Starter Kit? ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to format eMMC which is equipped on R-Car Gen3 Starter Kit. | How to format eMMC which is equipped on R-Car Gen3 Starter Kit.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to format eMMC which is equipped on R-Car Gen3 Starter Kit. | How to format eMMC which is equipped on R-Car Gen3 Starter Kit.]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the recommended Radio antenna? | What is the recommended Radio antenna?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is there LVDS panel which is recommended to use with Kingfisher? | Is there LVDS panel which is recommended to use with Kingfisher?]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use CN11 on Kingfisher with Starter Kit Premier(H3SK). | How to use CN11 on Kingfisher with Starter Kit Premier(H3SK).]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use CN11 on Kingfisher with Starter Kit Premier(H3SK). | How to use CN11 on Kingfisher with Starter Kit Premier(H3SK).]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can R-Car Gen3 Starter Kit support the Docker? | Can R-Car Gen3 Starter Kit support the Docker?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can R-Car Gen3 Starter Kit support the Docker? | Can R-Car Gen3 Starter Kit support the Docker?]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use multi-display on R-Car Gen3 Starter Kit. | How to use multi-display on R-Car Gen3 Starter Kit.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use the CAN on R-Car Gen3 Starter Kit. | How to use the CAN on R-Car Gen3 Starter Kit.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Automotive Grade Linux(AGL) on R-Car Gen3 Starter Kit. | How to use Automotive Grade Linux(AGL) on R-Car Gen3 Starter Kit.]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use upstream kernel on R-Car Gen3 Starter Kit. | How to use upstream kernel on R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use upstream kernel on R-Car Gen3 Starter Kit. | How to use upstream kernel on R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Renesas repository's kernel on R-Car Gen3 Starter Kit. | How to use Renesas repository's kernel on R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Renesas repository's kernel on R-Car Gen3 Starter Kit. | How to use Renesas repository's kernel on R-Car Gen3 Starter Kit.]]  
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/What is the output resolution of HDMI? | What is the output resolution of HDMI?]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use latest Yocto Project on R-Car Gen3 Starter Kit. | How to use latest Yocto Project on R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use latest Yocto Project on R-Car Gen3 Starter Kit. | How to use latest Yocto Project on R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which version of Wayland/Weston does R-Car support? | Which version of Wayland/Weston does R-Car support?]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which version of Wayland/Weston does R-Car support? | Which version of Wayland/Weston does R-Car support?]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to stop/start the CPUs. | How to stop/start the CPUs.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to stop/start the CPUs. | How to stop/start the CPUs.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use only Cortex A57(Big) core. | How to use only Cortex A57(Big) core.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use only Cortex A57(Big) core. | How to use only Cortex A57(Big) core.]]  
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Android on R-Car Gen3 Starter Kit. | How to use Android on R-Car Gen3 Starter Kit.]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use miniPCIe(wifi module) on Kingfisher with R-Car Gen3 Starter Kit. | How to use miniPCIe(wifi module) on Kingfisher with R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use miniPCIe(wifi module) on Kingfisher with R-Car Gen3 Starter Kit. | How to use miniPCIe(wifi module) on Kingfisher with R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use M.2 on Kingfisher with R-Car Gen3 Starter Kit. | How to use M.2 on Kingfisher with R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use M.2 on Kingfisher with R-Car Gen3 Starter Kit. | How to use M.2 on Kingfisher with R-Car Gen3 Starter Kit.]]  
Line 67: Line 72:
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use multiple camera on Kingfisher. | How to use multiple camera on Kingfisher.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use multiple camera on Kingfisher. | How to use multiple camera on Kingfisher.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to record an audio on Kingfisher. | How to record an audio on Kingfisher.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to record an audio on Kingfisher. | How to record an audio on Kingfisher.]]  
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to flash android images to R-Car Gen3 Starter Kit + Kingfisher on Windows OS. | How to flash android images to R-Car Gen3 Starter Kit + Kingfisher on Windows OS.]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Wayland/Weston and Multimedia on Yocto v4.1.0. | How to use Wayland/Weston and Multimedia on Yocto v4.1.0.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Wayland/Weston and Multimedia on Yocto v4.1.0. | How to use Wayland/Weston and Multimedia on Yocto v4.1.0.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change the output resolution of R-Car Gen3 Starter Kit. | How to change the output resolution of R-Car Gen3 Starter Kit.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change the output resolution of R-Car Gen3 Starter Kit. | How to change the output resolution of R-Car Gen3 Starter Kit.]]  
Line 78: Line 82:
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to scale up/down the video using vspfilter. | how to scale up/down the video using vspfilter.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to scale up/down the video using vspfilter. | how to scale up/down the video using vspfilter.]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to measure SoC temperature. | How to measure SoC temperature. ]]  
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to measure SoC temperature. | How to measure SoC temperature. ]]  
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the GFX/MMP packages of M3N/D3/E3? | Where can I get the GFX/MMP packages of M3N/D3/E3? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change the DDR frequency. | How to change the DDR frequency. ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the Open CL library of R-Car Starter Kit? | Where can I get the Open CL library of R-Car Starter Kit? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the Open CL library of R-Car Starter Kit? | Where can I get the Open CL library of R-Car Starter Kit? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use "Device Tree Overlays" | How to use "Device Tree Overlays" ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use "Device Tree Overlays" | How to use "Device Tree Overlays" ]]
Line 86: Line 88:
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to load image via network connection over USB-ether adapter on U-boot. | How to load image via network connection over USB-ether adapter on U-boot. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to load image via network connection over USB-ether adapter on U-boot. | How to load image via network connection over USB-ether adapter on U-boot. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build without proprietary Multimedia and 3D Graphics software. | How to build without proprietary Multimedia and 3D Graphics software. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build without proprietary Multimedia and 3D Graphics software. | How to build without proprietary Multimedia and 3D Graphics software. ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car Starter Kit board documentation? | Where can I get the R-Car Starter Kit board documentation? ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use H.264 encoding. | How to use H.264 encoding. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use H.264 encoding. | How to use H.264 encoding. ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "waiting for device" is shown in terminal when using fastboot. | The message "waiting for device" is shown in terminal when using fastboot. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Build process for Android crashes with strange error or segfault (mostly after 95%) | Build process for Android crashes with strange error or segfault (mostly after 95%) ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to flash separate image of Android. | How to flash separate image of Android. ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to limit total DDR memory size in Yocto | How to limit total DDR memory size in Yocto]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to limit total DDR memory size in Yocto | How to limit total DDR memory size in Yocto]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to write files to the read-only partitions on Android | How to write files to the read-only partitions on Android ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which is the H3SK(RTP0RC77951SKBX010SA03) schematic? | Which is the H3SK(RTP0RC77951SKBX010SA03) schematic?]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build kernel (u-boot, ATF etc) individually | How to build kernel (u-boot, ATF etc) individually]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build kernel (u-boot, ATF etc) individually | How to build kernel (u-boot, ATF etc) individually]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to crop the video which is captured by camera | How to crop the video which is captured by camera]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to crop the video which is captured by camera | How to crop the video which is captured by camera]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use IPL on hyperflash instead of eMMC | How to use IPL on hyperflash instead of eMMC]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use PVRTune with R-Car Gen3 Starter Kit | How to use PVRTune with R-Car Gen3 Starter Kit]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use PVRTune with R-Car Gen3 Starter Kit | How to use PVRTune with R-Car Gen3 Starter Kit]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Mini monitor for Starter Kit | How to get Mini monitor for Starter Kit]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit? | How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit? | How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh. | The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh. | The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh.]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier | The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/fastboot.sh script stacks with "waiting for any device" | fastboot.sh script stacks with "< waiting for any device >"]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to print verbose kernel logs to console on Android BSP | How to print verbose kernel logs to console on Android BSP]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can I use loopback of CAN on R-Car Starter Kit with Kingfisher?| Can I use loopback of CAN on R-Car Starter Kit with Kingfisher? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can I use loopback of CAN on R-Car Starter Kit with Kingfisher?| Can I use loopback of CAN on R-Car Starter Kit with Kingfisher? ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Parameter Sheet of R-Car Gen3 Starter Kit. | How to get Parameter Sheet of R-Car Gen3 Starter Kit. ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car H3/M3 device documentation? |Where can I get the R-Car H3/M3 device documentation? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to build and operate without Renesas Proprietary MMP(+GFX) in the Android BSP for R-Car? |Is it possible to build and operate without Renesas Proprietary MMP (+GFX) in the Android BSP for R-Car? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change SELinux to permissive on Android BSP | How to change SELinux to permissive on Android BSP]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Chromium browser on R-Car Gen3 Starter Kit |How to use Chromium browser on R-Car Gen3 Starter Kit ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Chromium browser on R-Car Gen3 Starter Kit |How to use Chromium browser on R-Car Gen3 Starter Kit ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use x11 instead of wayland on R-Car Gen3 Starter Kit |How to use x11 instead of wayland on R-Car Gen3 Starter Kit ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use x11 instead of wayland on R-Car Gen3 Starter Kit |How to use x11 instead of wayland on R-Car Gen3 Starter Kit ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." |The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." |The error message "NOTICE: BL2: Failed to DRAM initialize (-1)" is shown in IPL or kernel log stops the "Starting kernel ..." ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to use specific CPU core to run the specific application? |Is it possible to use specific CPU core to run the specific application? ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to use specific CPU core to run the specific application? |Is it possible to use specific CPU core to run the specific application? ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "OS was not verified!" is shown in U-boot on Android BSP |The message "OS was not verified!" is shown in U-boot on Android BSP ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to run Android BSP with R-Car Starter Kit only |How to run Android BSP with R-Car Starter Kit only ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" |Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher |Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher |Kernel boot is delay due to usb3.0 host firmware is missing when using upstream kernel on Kingfisher ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build yocto image by using docker |How to build yocto image by using docker ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to build yocto image by using docker |How to build yocto image by using docker ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to disable unnecessary packages with Kingfisher BSP |How to disable unnecessary packages with Kingfisher BSP ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to disable unnecessary packages with Kingfisher BSP |How to disable unnecessary packages with Kingfisher BSP ]]
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get  Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? |Where can I get  Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? ]]
 
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use weston without "Evaluation Software Package" | How to use weston without "Evaluation Software Package"]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use weston without "Evaluation Software Package" | How to use weston without "Evaluation Software Package"]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "usb usb1-port1: over-current condition" is shown in Kernel. | The error message "usb usb1-port1: over-current condition" is shown in Kernel.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "usb usb1-port1: over-current condition" is shown in Kernel. | The error message "usb usb1-port1: over-current condition" is shown in Kernel.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Minimonitor shows other board name despite of using Starter Kit + Kingfisher. | Minimonitor shows other board name despite of using Starter Kit + Kingfisher.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Minimonitor shows other board name despite of using Starter Kit + Kingfisher. | Minimonitor shows other board name despite of using Starter Kit + Kingfisher.]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get the evaluation package of proprietary graphics and multimedia without time limit | How to get the evaluation package of proprietary graphics and multimedia without time limit ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get the evaluation package of proprietary graphics and multimedia without time limit | How to get the evaluation package of proprietary graphics and multimedia without time limit ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Can R-Car support a root file system of Ubuntu? | Can R-Car support a root file system of Ubuntu?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Automotive Grade Linux(AGL) on R-Car Gen3 Starter Kit. | How to use Automotive Grade Linux(AGL) on R-Car Gen3 Starter Kit.]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the GFX/MMP packages of M3N/D3/E3? | Where can I get the GFX/MMP packages of M3N/D3/E3? ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Mini monitor for Starter Kit | How to get Mini monitor for Starter Kit]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier | The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier]]
 +
 +
=== Android ===
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use Android on R-Car Gen3 Starter Kit. | How to use Android on R-Car Gen3 Starter Kit.]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to flash android images to R-Car Gen3 Starter Kit + Kingfisher on Windows OS. | How to flash android images to R-Car Gen3 Starter Kit + Kingfisher on Windows OS.]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "waiting for device" is shown in terminal when using fastboot. | The message "waiting for device" is shown in terminal when using fastboot. ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Build process for Android crashes with strange error or segfault (mostly after 95%) | Build process for Android crashes with strange error or segfault (mostly after 95%) ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to flash separate image of Android. | How to flash separate image of Android. ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to write files to the read-only partitions on Android | How to write files to the read-only partitions on Android ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use IPL on hyperflash instead of eMMC | How to use IPL on hyperflash instead of eMMC]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/fastboot.sh script stacks with "waiting for any device" | fastboot.sh script stacks with "< waiting for any device >"]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to print verbose kernel logs to console on Android BSP | How to print verbose kernel logs to console on Android BSP]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change SELinux to permissive on Android BSP | How to change SELinux to permissive on Android BSP]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Is it possible to build and operate without Renesas Proprietary MMP(+GFX) in the Android BSP for R-Car? |Is it possible to build and operate without Renesas Proprietary MMP (+GFX) in the Android BSP for R-Car? ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/The message "OS was not verified!" is shown in U-boot on Android BSP |The message "OS was not verified!" is shown in U-boot on Android BSP ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to run Android BSP with R-Car Starter Kit only |How to run Android BSP with R-Car Starter Kit only ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" |Android BSP build process is stopped by syntax error of "build/make/tools/merge-event-log-tags.py" ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get  Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? |Where can I get  Android BSP for R-Car Starter Kit Pro(M3) and Kingfisher? ]]
 +
 +
=== Documentation ===
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car Starter Kit board documentation? | Where can I get the R-Car Starter Kit board documentation? ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Which is the H3SK(RTP0RC77951SKBX010SA03) schematic? | Which is the H3SK(RTP0RC77951SKBX010SA03) schematic?]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to get Parameter Sheet of R-Car Gen3 Starter Kit. | How to get Parameter Sheet of R-Car Gen3 Starter Kit. ]]
 +
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Where can I get the R-Car H3/M3 device documentation? |Where can I get the R-Car H3/M3 device documentation? ]]
  
 
=== R-Car Consortium ===
 
=== R-Car Consortium ===
Line 135: Line 146:
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Are there any partners/companies that can support the Android or AGL on R-Car? | Are there any partners/companies that can support the Android or AGL on R-Car?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/Are there any partners/companies that can support the Android or AGL on R-Car? | Are there any partners/companies that can support the Android or AGL on R-Car?]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to contact partner/company when the contact address/phone is not written in Solution Matching System | How to contact partner/company when the contact address/phone is not written in Solution Matching System ]]
 
* [[R-Car/Boards/Yocto-Gen3-CommonFAQ/How to contact partner/company when the contact address/phone is not written in Solution Matching System | How to contact partner/company when the contact address/phone is not written in Solution Matching System ]]
 +
 +
== <span style="color:#ff0000;">NOTE:This FAQ page moved [https://en-support.renesas.com/knowledgeBase/category/31363 here].</span> ==

Latest revision as of 03:40, 6 April 2021


NOTE:This FAQ page moved here.

Introduction

This page contains FAQ related with R-Car Gen3 devices.
It includes only open information such as OSS.

Search FAQ

TAG Search

about TAG Search

"TAG Search" is search method that extract specific FAQ from all FAQ list.
In the case of search with H3SK tag, FAQ related with H3SK is shown.

TAG List

FAQ List

Board Specification

Yocto(linux)

Android

Documentation

R-Car Consortium

NOTE:This FAQ page moved here.