R-Car/Boards/Yocto-Gen3-CommonFAQ
|
Introduction
This page contains FAQ related with R-Car Gen3 devices.
It includes only open information such as OSS.
Search FAQ
TAG Search
about TAG Search
"TAG Search" is search method that extract specific FAQ from all FAQ list.
In the case of search with H3SK tag, FAQ related with H3SK is shown.
TAG List
FAQ List
- The error message "Error: ethernet@e6800000 address not set." is shown in U-boot.
- Where can I buy the board ?
- Which dtb file is required to boot linux on the R-Car Starter Kit board ?
- How to get the SA001 Camera.
- I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK).
- What is the recommended GPS antenna?
- Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2
- Bitbake is stopped with error even if evaluation packages are located correctly.
- Does Starter Kit + Kingfisher support Suspend to RAM(S2R)?
- Is it possible to repair Starter Kit which is broken by connecting 12V power?
- Is there a built binary somewhere?
- How to run the "Suspend to RAM"
- The error message "renesas_sdhi_internal_dmac ee100000.sd: timeout waiting for SD bus idle" is shown on Yocto v4.1.0
- How to use USB camera on Starter Kit.
- Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built.
- Does Yocto v4.1.0 support HS400?
- What is "R-Car Solution Matching System"?
- How to use R-Car Solution Matching System.
- Are there any Quick/Fast boot solutions which run on R-Car?
- Please introduce partner/company that is R-Car application vendor.
- Are there any partners/companies that can support the development of R-Car solution by chinese company?
- Are there any partners/companies that can support the development of autonomous driving on R-Car?
- Please introduce partner/company that has a Virtualization solution on R-Car.
- Are there any partners/companies that can support the Android or AGL on R-Car?