Difference between revisions of "R-Car/Boards/Yocto-Gen3-CommonFAQ/Which dtb file is required to boot linux on the R-Car Starter Kit board ?"

From eLinux.org
Jump to: navigation, search
(Create new page)
 
(Yocto)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
== How to get the SA001 Camera ==  
+
== Which dtb file is required to boot linux on the R-Car Starter Kit board ? ==
You can buy SA001 camera by asking RenesasJa.<br>
+
== Yocto ==
Before contact to RenesasJa, please read below description carefully. <br>
+
{| class="wikitable"
'''<Caution><br>'''
+
|+ Combination of the board and dtb file
A quantity of cameras is limited.<br>
+
! Board type
Please understand that we cannot sell this camera to everyone.<br>
+
! v4.1.0 or later
<br>
+
! v3.21.0 or earlier
S001A Camera Specification:<br>
+
<!--
http://www.entroninc.com/prouduct.html<br>
+
|-
(S001 is the same camera with S002, just connector slightly different)<br>
+
| H3SK v1.1
* Image Sensor : AR0140AT<br>
+
| r8a7795-es1-h3ulcb.dtb
* ISP : AP0101<br>
+
| Image-r8a7795-es1-h3ulcb.dtb
* Resolution : 1280x728<br>
+
-->
<br>
+
|-
This camera cannot be purchased from the online shop.<br>
+
| H3SK v2.0(DDR 4GB)
If you want to get the Entron S001A190CM0A camera, <br>
+
| r8a7795-h3ulcb.dtb
please contact to "RenesasJa" from "Email this user" of following site.<br>
+
| Image-r8a7795-h3ulcb.dtb
https://elinux.org/User:RenesasJa<br>
+
|-
Please fill in the followings in the email.<br>
+
| H3SK v2.0(DDR 8GB)/v3.0(DDR 8GB)
* Name
+
| r8a7795-h3ulcb-4x2g.dtb
* Company name
+
| Image-r8a7795-h3ulcb-4x2g.dtb
* Email address
+
|-
* Why you need it (as detailed as possible)
+
| M3SK v1.0
* Required quantity
+
| r8a7796-m3ulcb.dtb
 
+
| Image-r8a7796-m3ulcb.dtb
 +
|-
 +
| M3SK v3.0
 +
| r8a7796-m3ulcb-2x4g.dtb
 +
| Image-r8a7796-m3ulcb-2x4g.dtb
 +
|-
 +
| M3NSK
 +
| r8a77965-m3nulcb.dtb
 +
| Image-r8a77965-m3nulcb.dtb
 +
|-
 +
|}
 +
If you use Kingfisher board, it is necessary to add suffix "-kf" to dtb filename. <br>
 +
: ex.) r8a7795-h3ulcb-kf.dtb
 +
Please also refer to [[R-Car/Boards/Kingfisher/Yocto-Gen3#Running_Yocto_images]]
  
 
[[Category: R-Car/FAQ/Gen3]]
 
[[Category: R-Car/FAQ/Gen3]]
 +
[[Category: R-Car/FAQ/Gen3/H3SK]]
 +
[[Category: R-Car/FAQ/Gen3/M3SK]]
 +
[[Category: R-Car/FAQ/Gen3/M3NSK]]
 +
[[Category: R-Car/FAQ/Gen3/U-boot]]
 
[[Category: R-Car/FAQ/Gen3/Kingfisher]]
 
[[Category: R-Car/FAQ/Gen3/Kingfisher]]

Latest revision as of 17:55, 5 August 2020

Which dtb file is required to boot linux on the R-Car Starter Kit board ?

Yocto

Combination of the board and dtb file
Board type v4.1.0 or later v3.21.0 or earlier
H3SK v2.0(DDR 4GB) r8a7795-h3ulcb.dtb Image-r8a7795-h3ulcb.dtb
H3SK v2.0(DDR 8GB)/v3.0(DDR 8GB) r8a7795-h3ulcb-4x2g.dtb Image-r8a7795-h3ulcb-4x2g.dtb
M3SK v1.0 r8a7796-m3ulcb.dtb Image-r8a7796-m3ulcb.dtb
M3SK v3.0 r8a7796-m3ulcb-2x4g.dtb Image-r8a7796-m3ulcb-2x4g.dtb
M3NSK r8a77965-m3nulcb.dtb Image-r8a77965-m3nulcb.dtb

If you use Kingfisher board, it is necessary to add suffix "-kf" to dtb filename.

ex.) r8a7795-h3ulcb-kf.dtb

Please also refer to R-Car/Boards/Kingfisher/Yocto-Gen3#Running_Yocto_images