Difference between revisions of "R-Car/Boards/Yocto-Gen3-CommonFAQ/Which dtb file is required to boot linux on the R-Car Starter Kit board ?"

From eLinux.org
Jump to: navigation, search
(Yocto)
(Yocto)
 
(No difference)

Latest revision as of 17:55, 5 August 2020

Which dtb file is required to boot linux on the R-Car Starter Kit board ?

Yocto

Combination of the board and dtb file
Board type v4.1.0 or later v3.21.0 or earlier
H3SK v2.0(DDR 4GB) r8a7795-h3ulcb.dtb Image-r8a7795-h3ulcb.dtb
H3SK v2.0(DDR 8GB)/v3.0(DDR 8GB) r8a7795-h3ulcb-4x2g.dtb Image-r8a7795-h3ulcb-4x2g.dtb
M3SK v1.0 r8a7796-m3ulcb.dtb Image-r8a7796-m3ulcb.dtb
M3SK v3.0 r8a7796-m3ulcb-2x4g.dtb Image-r8a7796-m3ulcb-2x4g.dtb
M3NSK r8a77965-m3nulcb.dtb Image-r8a77965-m3nulcb.dtb

If you use Kingfisher board, it is necessary to add suffix "-kf" to dtb filename.

ex.) r8a7795-h3ulcb-kf.dtb

Please also refer to R-Car/Boards/Kingfisher/Yocto-Gen3#Running_Yocto_images