From eLinux.org
< R-Car‎ | Chromium
Revision as of 22:05, 17 March 2022 by Y.H. (talk | contribs) (Building the BSP with Chromium browser)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


This page contains information how to run chromium on R-Car Gen3 devices.

See also:


EOL Notification of the M3SK

Production of M3SK is discontinued.
See M3SK page for detail.

The new version of R-Car Starter Kit Premier is now on sale !!

  • Equipped with R-Car H3e-2G
    (En) https://www.renesas.com/jp/en/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Zh) https://www.renesas.com/jp/zh/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
    (Jp) https://www.renesas.com/jp/ja/about/press-room/renesas-launches-r-car-gen3e-20-percent-higher-cpu-speed-automotive-infotainment-cockpit-and-digital
  • CPU performance is increased 20% by supporting up to 2GHz frequency over past products.
  • You can buy from here.

SW Release Information

Board name SW name Release date Note
R-Car Starter Kit ( Premier / Pro ) Yocto v5.9.4 (stable) [New!!] 2024/03/28
Kingfisher Infotainment Board Yocto v5.9.0 (stable) 2022/02/14 To check for latest information, please refer to the meta-rcar/tree/v5.9.0.
Android 10 (stable) 2021/07/26 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/11/25.
Android P (stable) 2020/09/29 R-Car Starter Kit Premier(R-Car H3) + Kingfisher is supported.
R-Car Starter Kit Pro(RTP8J77961ASKB0SK0SA05A) + Kingfisher is also supported from 2021/03/16.
CCPF-SK Board Yocto v5.9.0 (stable) 2022/02/08 Prebuilt binary is available in Quick startup guide page. (Updated on 2022/03/18)

R-Car Starter Kit is available

R-Car Starter Kit information
Board Name SoC version Hardware information Where to buy
R-Car Starter Kit Premier (H3) v3.0 Click here Click here
R-Car Starter Kit Pro (M3) v3.0 Click here Click here


Host PC

Ubuntu 20.04/18.04 LTS (64bit) is recommended as OS. 32bit version is not supported.
Ubuntu 16.04 is not supported !!

See also:

Yocto BSP

Community Yocto BSP "Yocto v5.5.0 + Yocto Project 3.3.3(Poky-3.3.3)".
For more information, see R-Car Gen3 Community Yocto BSP Release Note.

Confirmed Board

Board SoC Confirmed
R-Car Starter Kit Premier H3 v3.0 (1rank DDR) OK
R-Car Starter Kit Premier H3 v3.0 (2rank DDR) NT
R-Car Starter Kit Premier H3 v2.0 with 8GB DDR NT
R-Car Starter Kit Premier H3 v2.0 with 4GB DDR NT
R-Car Starter Kit Pro M3 v3.0 OK
R-Car Starter Kit Pro M3 v1.0 NT

18px <translate> Note:</translate> NT='Not Tested'

See also:

Chromium Version


Layer information

Layer Repo Branch Commit ID
meta-browser git://github.com/OSSystems/meta-browser master 8df26e66c28b43f1630fcd2cb952a1e69b6e6558
meta-clang git://github.com/kraj/meta-clang hardknott b0d805060791006d651efd3d7ae3dd5add8f70fe

Required packages

Proprietary evaluation package

  1. Download evaluation version of proprietary graphics and multimedia drivers from Renesas.
    To download Multimedia and Graphics library and related Linux drivers, please use the following link:
    Download two files:
    • R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20210921.zip
    • R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20210921.zip

Host PC required package

  1. Install required packages
    sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
         build-essential chrpath socat libsdl1.2-dev xterm python-crypto cpio python python3 \
         python3-pip python3-pexpect xz-utils debianutils iputils-ping libssl-dev
    Refer to Yocto Project Quick Start for more information.

Building the BSP with Chromium browser

Build using script

  1. Directory Structure
  2. build script
    BOARD_LIST=("h3ulcb" "m3ulcb")
    MILESTONE=$(basename ${0%.*} |cut -d'_' -f2)
    META_BROWSER_COMMIT=8df26e66c28b43f1630fcd2cb952a1e69b6e6558 # 94.0.4606.71
    YOCTO_PROJECT_CODENAME=$(echo ${REPO_MANIFEST} | cut -d '-' -f1)
    Usage () {
        echo "Usage: $0 \${TARGET_BOARD_NAME}"
        echo "BOARD_NAME list: "
        for i in ${BOARD_LIST[@]}; do echo "  - $i"; done
    # Check Param.
    if ! `IFS=$'\n'; echo "${BOARD_LIST[*]}" | grep -qx "${TARGET_BOARD}"`; then
    mkdir -p ${WORK}
    cd ${WORK}
    # Clone basic Yocto layers and switch to proper branches/commits
    curl https://storage.googleapis.com/git-repo-downloads/repo > ./repo
    chmod a+x ./repo
    ./repo init -b master -m ${REPO_MANIFEST} -u https://github.com/renesas-rcar/rcar-manifest.git
    ./repo sync
    ./repo forall -c git reset --hard
    ./repo forall -c git clean -df
    # Clone layers in parallel
    cd ${WORK}
    git clone https://github.com/OSSystems/meta-browser &
    git clone https://github.com/kraj/meta-clang -b ${YOCTO_PROJECT_CODENAME} &
    # Wait for all clone operations
    # Switch to proper branches/commits
    cd ${WORK}/meta-browser
    git pull; git checkout -B tmp ${META_BROWSER_COMMIT}; git clean -fd
    cd ${WORK}/meta-clang
    git pull; git checkout -B tmp ${META_CLANG_COMMIT}; git clean -fd
    # Populate meta-renesas with proprietary software packages
    mkdir -p ${PROP_DIR}
    unzip -qo ${PROPRIETARY_DIR}/${GFX_MMP_LIB} -d ${PROP_DIR}
    cd $WORK/meta-renesas
    sh meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh -f ${PROP_DIR}
    cd ${WORK}
    source poky/oe-init-build-env ${WORK}/build
    cd ${WORK}/build
    cp ${WORK}/meta-renesas/meta-rcar-gen3/docs/sample/conf/${TARGET_BOARD}/poky-gcc/mmp/*.conf ./conf/
    cp conf/local-wayland.conf conf/local.conf
    cat << 'EOS' >> conf/local.conf
    DISTRO_FEATURES_append = " h264enc_lib"
    PACKAGECONFIG_pn-chromium-ozone-wayland =" proprietary-codecs"
    IMAGE_INSTALL_append = " chromium-ozone-wayland"
    IMAGE_INSTALL_append = " ntp"
    # Setting for building Chromium
    ulimit -n 8192
    # Add layers
    bitbake-layers add-layer ../meta-clang
    bitbake-layers add-layer ../meta-browser/meta-chromium
    bitbake-layers add-layer ../meta-openembedded/meta-networking # for ntp
    bitbake core-image-weston
  3. build
    ./build_m94.sh <target_board_name>
    18px <translate> Note:</translate> target_board_name is "h3ulcb" or "m3ulcb"
    If the build completes successfully, all the necessary files are generated in a following directory:
    Image is a Kernel image, *.dtb is a blob file, core-image-<image_type>-<board_name>.tar.bz2 is the rootfs, modules-<board_name>.tgz are kernel modules.
  4. You can now proceed with Running Yocto images

Running Yocto images

Linux kernel can be booted from microSD/USB memory/eMMC/TFTP.
Root FS can be mounted from microSD/USB memory/eMMC/NFS.
See also R-Car/Boards/Yocto-Gen3#Running_Yocto_images.

How to run Chromium

chromium --no-sandbox

How to test

Test H3 v3.0(1rank DDR) M3 v3.0
Launch Chromium OK OK
Maximize window of Chromium OK OK
Show "About Chromium" OK OK
Search youtube using google OK OK
Play video/audio on youtube OK OK
Run webgl sample(Aquarium) OK OK

18px <translate> Note:</translate> NT='Not Tested'

Known issues and limitations

See also R-Car/Boards/Yocto-Gen3#Known_issues_and_limitations.

Q&A site


FAQ site