Difference between revisions of "RPI vcgencmd usage"
Paulcheffus (talk | contribs) m |
m |
||
Line 34: | Line 34: | ||
Parameters and function of other commands are not known. | Parameters and function of other commands are not known. | ||
+ | Current (version 335792) output of '''vcgencmd commands''': | ||
+ | |||
+ | vcos, ap_output_control, ap_output_post_processing, pm_set_policy, pm_get_status, pm_show_stats, pm_start_logging, pm_stop_logging, version, commands, set_vll_dir, led_control, set_backlight, set_logging, get_lcd_info, set_bus_arbiter_mode, cache_flush, otp_dump, codec_enabled, measure_clock, measure_temp, hdmi_ntsc_freqs, render_bar, disk_notify, inuse_notify, sus_suspend, sus_status, sus_is_enabled, sus_stop_test_thread, egl_platform_switch, file, vctest_memmap, vctest_start, vctest_stop, vctest_set, vctest_get |
Revision as of 03:18, 14 September 2012
/opt/vc/bin/vcgencmd commands
Shows a list of possible (needs verification) commands.
Verified commands:
vcgencmd measure_clock <clock>
Shows clock frequency, clock can be one of arm, core, h264, isp, v3d, uart, pwm, emmc, pixel, vec, hdmi, dpi.
vcgencmd measure_volts <id>
Shows voltage, id can be one core, sdram_c, sdram_i, sdram_p, and defaults to core if not specified.
vcgencmd measure_temp
Shows core temperature of BCM2835 SoC.
vcgencmd codec_enabled <codec>
Shows if the specified codec is enabled, codec can be one of H264 MPG2 WVC1
vcgencmd version
Shows the firmware version
Parameters and function of other commands are not known.
Current (version 335792) output of vcgencmd commands:
vcos, ap_output_control, ap_output_post_processing, pm_set_policy, pm_get_status, pm_show_stats, pm_start_logging, pm_stop_logging, version, commands, set_vll_dir, led_control, set_backlight, set_logging, get_lcd_info, set_bus_arbiter_mode, cache_flush, otp_dump, codec_enabled, measure_clock, measure_temp, hdmi_ntsc_freqs, render_bar, disk_notify, inuse_notify, sus_suspend, sus_status, sus_is_enabled, sus_stop_test_thread, egl_platform_switch, file, vctest_memmap, vctest_start, vctest_stop, vctest_set, vctest_get