Difference between revisions of "RaspberryPiFirstSteps"

From eLinux.org
Jump to: navigation, search
(Finding all the right hardware)
(Page has been merged into RPi_Hardware_Basic_Setup, blanking and setting redirect.)
 
(19 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Category:RaspberryPi]]
+
#REDIRECT [[RPi_Hardware_Basic_Setup]]
 
'''''NOTE : This page is meant to become a simpler introduction to the RaspberryPi than the page [[RaspberryPiBoardBeginners]]'''''
 
 
 
=Finding all the right hardware=
 
 
 
You will need
 
 
 
* the Raspberry Pi board
 
* a USB keyboard
 
* a power source that has a MicroUSB plug (IMPORTANT , read on )
 
* a video cable (HDMI or RCA/Cinch with yellow plugs)
 
* a preloaded SD card (we suggest Linux)
 
 
 
Highly Suggested extras are
 
* a USB mouse
 
* a powered USB Hub
 
* a USB A male to MicroUSB male cable ( for using different power sources )
 
* and for Internet , a  USB WiFi adaptor (Model A) or a LAN cable (Model B)
 
 
 
=What Power source to use=
 
 
 
First , the Power Source has to deliver '''5V at  400 mA or more from the moment it is connected to the mains socket ''' on.
 
You can use  the charger of a mobile phone . Just check if it fits in the specs and its plug fits into the RaspberryPi !
 
 
 
If you have USB A to MicroUSB plug cable ( shipped with many Phones and MP3 players as data cable ) you may use :
 
* a laptop / PC
 
* a pack of 4 AA batteries (soldering required)
 
* a powered USB hub
 
* a special wall wart with USB port(s)
 
 
 
=Where to get the preloaded SD Card from=
 
Many digital cameras use SD cards . Any SD or SDHC card between 2 and 32 GB should work.
 
Backup all data and photos  on them.
 
Now get a PC with Linux and a compatible Cardreader.
 
 
 
Plug the card into the connected cardreader,  and use PiCard.
 
 
 
=Setting  up=
 

Latest revision as of 11:55, 26 January 2012