Difference between revisions of "RaspberryPi Boards"

From eLinux.org
Jump to: navigation, search
(→‎Hardware versions/revisions)
 
(73 intermediate revisions by 25 users not shown)
Line 1: Line 1:
 
==Hardware versions/revisions==
 
==Hardware versions/revisions==
 
Several different boards have been found probably from different assembly lines, and the following table tries to help you identify your board for better troubleshooting.
 
Several different boards have been found probably from different assembly lines, and the following table tries to help you identify your board for better troubleshooting.
−
These differences are been debated on raspberrypi.org on this thread [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9524&start=25]
+
These differences are being debated on raspberrypi.org on this thread [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9524&start=25]
  
 
For what we can see for model B boards there are mainly two versions that differ on the type RAM used, Samsung (S) and Hynix (H).
 
For what we can see for model B boards there are mainly two versions that differ on the type RAM used, Samsung (S) and Hynix (H).
Line 7: Line 7:
  
 
Note: For '''Board ver.''' we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")
 
Note: For '''Board ver.''' we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")
 +
      Look for the date of manufacturing printed with the year and week (back side, board edge near LAN connector). In this example year (2012) and week (18th):[[File:Date_of_manufacturing.jpg|100px|thumb|right]]
 +
 +
  
  
Line 25: Line 28:
 
! Front
 
! Front
 
! Back
 
! Back
−
! Seen from
+
! Distributor
 
! Owner
 
! Owner
 
|-
 
|-
−
| Ayxxxx
+
| AS1245
−
|  
+
| Samsung <pre>225
−
|  
+
K4P2G324ED-AGC1
 +
GAC0288J</pre>
 +
| N/A
 +
| <pre>220
 +
CFP
 +
20N</pre>
 +
| N/A
 +
| <pre>17-33G
 +
RQB44</pre>
 
|
 
|
 +
* None
 
|  
 
|  
 
|  
 
|  
−
|  
+
| RS
−
|  
+
| [[User:AndrewS|AndrewS]]
−
|
 
−
|
 
−
|
 
 
|}
 
|}
  
Line 58: Line 67:
 
! Front
 
! Front
 
! Back
 
! Back
−
! Seen from
+
! Distributor
 
! Owner
 
! Owner
 +
 +
|-
 +
| BS1321
 +
| Samsung <pre>316
 +
K4P4G324EB-AGC1
 +
GKDVBRGCU</pre>
 +
| SMSC<pre>LAN9512-JZX
 +
81319-A1B17
 +
3194KPA
 +
CTI-TW</pre>
 +
| <pre>220
 +
CFP
 +
3G6</pre>
 +
| None/None
 +
| <pre>17-33G
 +
RQC18</pre>
 +
|
 +
* None
 +
| [[File:RaspberryPi-Board Bv2-Front.jpg|100px|thumb|center]]
 +
| [[File:RaspberryPi-Board Bv2-Back.jpg|100px|thumb|center]]
 +
| Farnell / element-14
 +
| [[User:Otousama|Otousama]]
 +
 +
|-
 +
| BM1320
 +
| Micron <pre>3DAI8
 +
D9QHN
 +
CZ22</pre>
 +
| SMSC<pre>LAN9512-JZX
 +
81319-A1B17
 +
3194KQA
 +
CTI-TW</pre>
 +
| <pre>220
 +
CFP
 +
3G6</pre>
 +
| None/None
 +
| <pre>SE8117T33
 +
1304-LF</pre>
 +
|
 +
* None
 +
| [[File:BM1320-Front.JPG|100px|thumb|center]]
 +
| [[File:BM1320-Back.JPG|100px|thumb|center]]
 +
| RS
 +
| [[User:V Tom|V Tom]]
 +
 +
|-
 +
| AS1251
 +
| Samsung <pre>301
 +
K4P4G324EB-AGC1
 +
GKKS23HAU</pre>
 +
| SMSC<pre>LAN9512-JZX
 +
81244-A1817
 +
BR1525858
 +
CTI-TW</pre>
 +
| <pre>220
 +
CFP
 +
2BD</pre>
 +
| None/None
 +
| <pre>17-33G
 +
RQB44</pre>
 +
|
 +
* None
 +
|
 +
|
 +
| Farnell / element-14
 +
| [[User:SiBaz|SiBaz]]
 +
|-
 +
| BS1240
 +
| Samsung <pre>301
 +
K4P4G324EB-AGC1
 +
GKI3619P</pre>
 +
| SMSC<pre>LAN9512-JZX
 +
B1231-A1B17
 +
8R151387B
 +
CTI-TW</pre>
 +
| <pre>220
 +
CFP
 +
2GO</pre>
 +
| None/None
 +
| <pre>17-33G
 +
RSB39</pre>
 +
|
 +
* None
 +
|
 +
|
 +
| Farnell / element-14
 +
| [[User:Jwdietrich|jwdietrich]]
 
|-
 
|-
 
| BS1215
 
| BS1215
Line 113: Line 209:
 
|  
 
|  
 
| Farnell
 
| Farnell
−
| AndrewS
+
| [[User:AndrewS|AndrewS]]
 +
|-
 +
| BS1301
 +
| Samsung <pre>301
 +
K4P4G32F4EB-AGC1
 +
GKL438GHU
 +
(512MB version)</pre>
 +
| SMSC <pre>
 +
LAN9512-JZX
 +
81244-A1817
 +
BR1525858
 +
CTI-TW</pre>
 +
| <pre>220
 +
CFP
 +
28D</pre>
 +
| N/A
 +
| <pre>17-33G
 +
RQB44</pre>
 +
|
 +
* None
 +
|
 +
|
 +
| Farnell
 +
| [[User:AndrewS|AndrewS]]
 
|-
 
|-
 
| BS1218
 
| BS1218
 
| Samsung<pre>216
 
| Samsung<pre>216
−
K4P26324ED-AGC1
+
K4P2G324ED-AGC1
 
GAL0839V</pre>
 
GAL0839V</pre>
 
| SMSC<pre>
 
| SMSC<pre>
Line 138: Line 257:
 
|-
 
|-
 
| BS1218
 
| BS1218
−
| ?
+
| Samsung<pre>216
−
| ?
+
K4P2G324ED-AGC1
−
| <pre>?</pre>
+
GAJ0419C</pre>
−
| ?
+
| SMSC<pre>
 +
LAN9512-JZX
 +
B1212-A1B17
 +
BR149884S</pre>
 +
| <pre>220
 +
16V
 +
EE5</pre>
 +
| T014
 
5.8 / 3.9
 
5.8 / 3.9
−
| <pre></pre>
+
| <pre>SE8117T33
 +
1213-LF</pre>
 
|  
 
|  
 
* None
 
* None
−
|  
+
| [[File:Antijn_raspi_farnell_top.jpg|100px|thumb|center]]
−
|  
+
| [[File:Antijn_raspi_farnell_bot.jpg|100px|thumb|center]]
 
| Farnell
 
| Farnell
 
| antijn
 
| antijn
 
|-
 
|-
 
| BS1218
 
| BS1218
 +
| Samsung
 
| ?
 
| ?
 +
| <pre></pre>
 
| ?
 
| ?
−
| <pre>?</pre>
+
? / ?
−
| ?
+
|
 +
|
 +
* None
 +
| [[File:RaspberryPi-BS1218-Front-JakeBlues.jpg|100px|thumb|center]]
 +
| [[File:RaspberryPi-BS1218-Back-JakeBlues.jpg|100px|thumb|center]]
 +
| Farnell
 +
| JakeBlues
 +
|-
 +
 
 +
| BH1208
 +
| Hynix <pre>
 +
H9TKNNN2GDMP
 +
LANDM 149A
 +
</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1134-A1B17
 +
8R147769B
 +
STA-SG
 +
</pre>
 +
| <pre>220
 +
16V
 +
EE2</pre>
 +
| 14
 +
| <pre>
 +
SE8117T33
 +
1001-LF</pre>
 +
|
 +
* No issues after getting a good power supply
 +
* Note the SMSC is 8R149482C which I suspect is the same for the others.
 +
* Ethernet: LU1S041ALF 1018M
 +
| [[File:RaspberryPi-BS1208-Front-MarkBeckett.JPG|100px|thumb|center]]
 +
| [[File:RaspberryPi-BS1208-Back-MarkBeckett.JPG|100px|thumb|center]]
 +
| Farnell
 +
| MarkBeckett
 +
|-
 +
 
 +
| BH1219
 +
| Hynix <pre>
 +
H9TKNNN2GDMP
 +
LANDM 218A
 +
</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1206-A1B17
 +
8R149471A
 +
CTI-TW
 +
</pre>
 +
| <pre>220
 +
16V
 +
2E2</pre>
 +
| T014
 +
| <pre>
 +
SE8117T33
 +
1217-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1220
 +
| [[File:RaspberryPI_1219_RS_Pi_1_MCB1.JPG|100px|thumb|center]]
 +
| [[File:RaspberryPI_1219_RS_Pi_2_MCB1.JPG|100px|thumb|center]]
 +
| RS
 +
| MarkBeckett
 +
|-
 +
| BH1218
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LRNOM 217A</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1215-A1B17
 +
BR1501888</pre>
 +
| <pre>2E
 +
220
 +
16H</pre>
 +
| 14
 
6.4 / 5.0
 
6.4 / 5.0
−
| <pre></pre>
+
| <pre>SE8117T33
 +
1213-LF</pre>
 
|  
 
|  
 
* USB/Keyboard/LAN issues
 
* USB/Keyboard/LAN issues
 +
| [[File:Antijn_raspi_RS_top.jpg|100px|thumb|center]]
 +
| [[File:Antijn_raspi_RS_bot.jpg|100px|thumb|center]]
 +
| RS
 +
| antijn
 +
|-
 +
| BH1218
 +
| Hynix <pre>
 +
H9TKNNN2GDMP
 +
LRNDM 217A</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1215-A1817
 +
BR1494828</pre>
 +
| <pre>2E
 +
220
 +
16H</pre>
 +
| 14
 +
6.1 / 5.6
 +
| <pre>
 +
SE8117T33
 +
1213-LF</pre>
 +
|
 +
* "I haven't had any issues"[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=9524&start=50]
 +
* Ethernet HR901110A 1211
 +
* E2112RSV1.0B1.1
 
|  
 
|  
 
|  
 
|  
 
| RS
 
| RS
−
| antijn
+
| dukla2000
 
|-
 
|-
 
| BS1219
 
| BS1219
Line 182: Line 410:
 
| Farnell
 
| Farnell
 
| Troublesome
 
| Troublesome
 +
|-
 +
| BH1208
 +
| Hynix
 +
| SMSC
 +
| <pre>220
 +
16V
 +
EE2</pre>
 +
| 14
 +
? / ?
 +
| ?
 +
|
 +
* None
 +
| [[File:Raspberry-pi-top.jpg|100px|thumb|center]]
 +
| [[File:Raspberry-pi-bottom.jpg|100px|thumb|center]]
 +
| Farnell
 +
| selsinork
 
|-
 
|-
 
| BH1213
 
| BH1213
Line 341: Line 585:
 
LANDM 217A</pre>
 
LANDM 217A</pre>
 
| SMSC
 
| SMSC
 +
<pre>LAN9512-JZX
 +
B1215-A1B17
 +
BR150188B
 +
ASE-TW (e3)</pre>
 
| <pre>2E
 
| <pre>2E
 
220
 
220
 
16H</pre>
 
16H</pre>
 
| 14
 
| 14
−
? / ?
+
6.9 / 5.9
 
| <pre>SE8117T33
 
| <pre>SE8117T33
 
1213-LF</pre>
 
1213-LF</pre>
 
|
 
|
 
* None
 
* None
−
|
+
|[[File:RPi1T.jpg|100px|thumb|center]]
−
|
+
|[[File:RPi1B.jpg|100px|thumb|center]]
 
| RS
 
| RS
 
| Mortimer
 
| Mortimer
Line 359: Line 607:
 
LANDM 218A</pre>
 
LANDM 218A</pre>
 
| SMSC
 
| SMSC
 +
<pre>LAN9512-JZX
 +
B1215-A1B17
 +
BR150188A
 +
ASE-TW (e3)</pre>
 
| <pre>2E
 
| <pre>2E
 
220
 
220
Line 368: Line 620:
 
|
 
|
 
* None
 
* None
 +
|[[File:RPi2T.jpg|100px|thumb|center]]
 +
|[[File:RPi2B.jpg|100px|thumb|center]]
 +
| RS
 +
| Mortimer
 +
|-
 +
| BH1218
 +
| Hynix
 +
<pre>
 +
H9TKNNN2GDMP
 +
LRNOM 217A
 +
</pre>
 +
| SMSC
 +
<pre>
 +
LAN9512-JZX
 +
B1215-A1B17
 +
8R150188B
 +
ASE-TW (e3)
 +
</pre>
 +
| <pre>2E
 +
22-
 +
16H</pre>
 +
| 14
 +
? / ?
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* D1 shorted when attaching a Neewer HDMI to VGA adapter. The adapter has had no other tests and the raspberry pi's HDMI output has not been connected to any other devices before or since.
 +
| [[File:RaspberryPi-BH1218-Front-Tom1989.jpg|100px|thumb|center]]
 +
| [[File:RaspberryPi-BH1218-Back-Tom1989.jpg|100px|thumb|center]]
 +
| RS
 +
| Tom1989
 +
|-
 +
| BH1208
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LANDM 149A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1134-A1B17
 +
BR147769B
 +
STA-SG</pre>
 +
| <pre>220
 +
16V
 +
EE2</pre>
 +
| ?
 +
? / ?
 +
| <pre>SE8117T33
 +
1001-LF</pre>
 +
|
 +
* Stable, powers up off any charger.  Powers off laptop USB without any issues
 +
* Ethernet: LU1S041ALF 1018M
 +
|
 +
|
 +
| Farnell
 +
| Tass
 +
|-
 +
| BH1213
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LANDM 149A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1134-A1B17
 +
BR147769B
 +
STA-SG</pre>
 +
| <pre>n2
 +
220C
 +
UD</pre>
 +
| ?
 +
? / ?
 +
| <pre>SE8117T33
 +
943-LF</pre>
 +
|
 +
* Stable, no power issues (not thouroughly tested)
 +
* Ethernet: HR901110A 1211|
 
|
 
|
 
|
 
|
 
| RS
 
| RS
−
| Mortimer
+
| Tass
−
|}
+
|-
 +
| BH1218
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LANDM 217A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1216-A1B17
 +
8R149482C
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H</pre>
 +
| 14
 +
14 / 5.1
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* Up headless with Squeeze and Wheezy for ~six weeks, light duty, no problems
 +
* Ethernet: HR901110A 1211
 +
|[[File:Rpi001F.jpg|100px|thumb|center]]
 +
|[[File:Rpi001R.jpg|100px|thumb|center]]
 +
| RS
 +
| Davidm870
 +
|-
 +
| BS1218
 +
| Samsung <pre>216
 +
K42P2G324ED-AGG1
 +
GAL0839T</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1212-A1B17
 +
8R149885A
 +
ASE-TW (e3)</pre>
 +
| <pre>220
 +
16V
 +
EE5</pre>
 +
| T014
 +
T014 / ?
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* Comes upp headless with  Wheezy, not tested extensively
 +
* Ethernet: HR901110A 1218
 +
|[[File:Rpi002F.jpg|100px|thumb|center]]
 +
|[[File:Rpi002R.jpg|100px|thumb|center]]
 +
| Farnell
 +
| Davidm870
 +
|-
 +
| BS1219
 +
| Samsung <pre>216
 +
K4P2G324ED-AGC1
 +
GAL0859V</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1216-A1B17
 +
8R149482C
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014
 +
2.9ohm / 3.0ohm
 +
| <pre>SE8117T33
 +
0941-LF</pre>
 +
|
 +
* First had problems (freezing, no LAN, etc.) due to low quality power supply - cheap ebay adaptor. Solved with own [[RPi_5V_PSU_construction| PSU construction]] with 7805 stabiliser adjusted to 5.25V. Now works OK with Raspbian “wheezy”, but not yet tested extensively.
 +
* Ethernet: HR901110A 1220
 +
* F3 0.3ohm
 +
| [[File:RPi-BS1219-Front_Pinoccio.jpg|100px|thumb|center]]
 +
| [[File:RPi-BS1219-Back_Pinoccio.jpg|100px|thumb|center]]
 +
| Farnell
 +
| [[User:Pinoccio|Pinoccio]]
 +
|-
 +
| BS1219
 +
| Samsung <pre>216
 +
K4P2G324ED-AGC1
 +
GAL0859D</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1216-A1B17
 +
8R149482C
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
0941-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1220
 +
* FN120659744
 +
| [[File:RPi-BS1219-Front_slabua.jpg|100px|thumb|center]]
 +
| [[File:RPi-BS1219-Back_slabua.jpg|100px|thumb|center]]
 +
| Farnell
 +
| [SLB] [http://twitter.com/slabua @slabua]
 +
|-
 +
| BH1222
 +
| Hynix <pre>H9TKNNN2GDMP
 +
LANDM 214A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1215-A1B17
 +
8R148168E
 +
ASE-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* No issues
 +
* Ethernet: HanRun HR901110A 1225
 +
* E2712RSV1.0B1.1
 +
| [[File:RPi-BH1222-Front_slabua.jpg|100px|thumb|center]]
 +
| [[File:RPi-BH1222-Back_slabua.jpg|100px|thumb|center]]
 +
| RS
 +
| [SLB] [http://twitter.com/slabua @slabua]
 +
|-
 +
| BS1224
 +
| Samsung <pre>222
 +
K4P2G324ED-AGC1
 +
GAA0419T</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1222-A1B17
 +
8R150543C
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| T014 / T014
 +
? / ?
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1225
 +
|
 +
|
 +
| Farnell
 +
| accumulator
 +
|-
 +
| BS1224
 +
| Samsung <pre>222
 +
K4P2G324ED-AGC1
 +
GAA0519H</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1223-A1B17
 +
8R15D81DA
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1220-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1225
 +
* No Issues
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
| [[File:RPi-BS1224-Front_Shuckle.jpg|100px|thumb|center]]
 +
|
 +
| Farnell
 +
| shuckle
 +
|-
 +
| BS1218
 +
| Samsung<pre>216
 +
K4P2G324ED-AGC1
 +
GAL0839R</pre>
 +
| SMSC<pre>
 +
LAN9512-JZX
 +
B1215-A1B17
 +
8R150188B
 +
ASE-TW
 +
(e3)</pre>
 +
| <pre>2E
 +
220
 +
16H
 +
</pre>
 +
| F014
 +
? / ?
 +
| <pre>SE8117T33
 +
1213-LF</pre>
 +
|
 +
* None
 +
|
 +
|
 +
| Farnell
 +
| d4lamar
 +
|-
 +
| BS1222
 +
| Samsung <pre>225
 +
K4P2G324ED-AGC1
 +
GAC0289E</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R1511968
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1217-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1228
 +
* Both boards by wcfields ordered at the same time/date.
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
|
 +
|
 +
| MCM
 +
| wcfields
 +
|-
 +
| BS1232
 +
| Samsung <pre>225
 +
K4P2G324ED-AGC1
 +
GAC0289H</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R151261A
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H
 +
</pre>
 +
| 0000 / 0000
 +
0 / 0
 +
| <pre>SE8117T33
 +
1225-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1228
 +
* Both boards by wcfields ordered at the same time/date.
 +
* Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses
 +
|
 +
|
 +
| MCM
 +
| wcfields
 +
|-
 +
| BS1228
 +
| Samsung <pre>234
 +
K4P2G324ED-AGC1
 +
GAK1229X</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1228-A1B17
 +
8R151303B
 +
CTI-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
16H</pre>
 +
| 0000 / 0000
 +
? / ?
 +
| <pre>SE8117T33
 +
1220-LF</pre>
 +
|
 +
* Serious problems with the 4GB SDHC-Card ordered with the board on initial testing with Gentoo (corrupted FS)
 +
* Same issues using rasbian and two different supported SD cards
 +
* Using RS original power adapter
 +
|
 +
|
 +
| RC
 +
| FKlama
 +
|-
 +
| BS1233
 +
| Samsung <pre>231
 +
K4P4G324EB-AGC1
 +
GKG0609V
 +
(512MB version)</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1227-A1B17
 +
8R151261A
 +
CTI-TW (e3)</pre>
 +
| <pre>2E
 +
220
 +
CFP
 +
2G6</pre>
 +
| None / None
 +
? / ?
 +
| <pre>17-33G
 +
RRB32 (ON)</pre>
 +
|
 +
*Ethernet Jack: No visible branding
 +
*PS: 500mA Mobile phone charger & USB Port on Laptop and Desktop (These are all I had). Works with blackberry 8520 550mA charger.
 +
*Fuse(s): ONLY seems to have green polyswitch (F3) on bottom side of board F1 and F2 don't exist
 +
*In the position of the (other fuses) there is a mounting hole, likewise there is also a mounting hole under the Raspberry Pi Logo.
 +
 
 +
*There is also an extra header (P5) defined on the bottom side of the PCB near P1 (which is on the top side)
 +
*Won't boot with a known working (This same card will boot on BS1215 ) Kingston 4GB Class 4 SD Card, Raspbian "wheezy" 2012-09-18.
 +
*When using raspbmc powered with 550ma blackberry 8520 charger, keyboard and mouse disconnects frequently also external hard drive unmounts frequently.
 +
*When using torrents and connected with usb wireless adapter (tested with Netgear WNA1000M), when torrent picks up speed, raspbian becomes unstable. Same works well over Ethernet.
 +
*The unit WILL boot from the SD card bought from Element 14.
 +
*Will add more when I know more.
 +
|
 +
|
 +
| Farnell/Element14 (AU)
 +
| TheSteveB
 +
|-
 +
| BS1236
 +
| Samsung <pre>225
 +
K4P46324EB-AGC1
 +
GKEM509X
 +
(512MB version)</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1232-A1B17
 +
8R151680A
 +
CTI-TW (e3)</pre>
 +
| <pre>2F
 +
220
 +
16H</pre>
 +
| None / None
 +
? / ?
 +
| <pre>SE8117T33
 +
1225-LF</pre>
 +
|
 +
*Ethernet Jack: HanRun HT901110A 1228
 +
*Seems to randomly power off on 3 different PS's (650mA, 900mA and 1A) (http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=22353)
 +
*Extra header, F1, F2 and F3 and mounting holes just like BS1233
 +
|
 +
|
 +
|RS
 +
|Yaron
 +
|-
 +
| BS1238
 +
| Samsung <pre>225
 +
K4P4G324EB-AGC1
 +
GKFX1390
 +
(512MB version)</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
B1232-A1B17
 +
8R151549A
 +
CTI-TW (e3)</pre>
 +
| <pre>2H
 +
220
 +
16H</pre>
 +
| None / None
 +
? / ?
 +
| <pre>SE8117T33
 +
1225-LF</pre>
 +
|
 +
*Ethernet Jack: HanRun HR901110A 1230
 +
*With extra header P5, missing fuses F1 and F2, and with mounting holes just like BS1233
 +
*Weird stability problems. Can build Quake3, and can play it for a little while, but eventually locks up (black screen, loses ethernet link). Putting it in the Adafruit case seems to exacerbate the problem.
 +
*Highest temp measured by <code>vcgencmd measure_temp</code> is 53.5C. Last measured temp before lockup was 53.0C
 +
*Problem occurs with both the Adafruit power supply as well as my Nexus 7 2A supply.
 +
*Tested with at least 3 different Micro-USB cables.
 +
*Tested with the 4GB Dane-Elec Class 4 MicroSD card from Adafruit, as well as an 8GB Class 10 SanDisk full-size SD card.
 +
*Voltages:
 +
**Idle, with HDMI only
 +
***5.06V (polyfuse in)
 +
***4.82V (polyfuse out)
 +
**Idle, with HDMI, keyboard and mouse
 +
***5.04V (polyfuse in)
 +
***4.77V (polyfuse out)
 +
**Running Quake (with HDMI, keyboard, mouse, and network)
 +
***4.98V (polyfuse in)
 +
***4.55V (polyfuse out)
 +
|
 +
|
 +
|Adafruit (US)
 +
|Balefrost
 +
|-
 +
| BH1310
 +
| Hynix <pre>H9TKNNN4GDMP
 +
LRNDM 305A</pre>
 +
| SMSC
 +
<pre>LAN9512-JZX
 +
81303-A1B17
 +
3032AWA
 +
CTI-TW</pre>
 +
| <pre>L2
 +
220
 +
16H</pre>
 +
| N/A
 +
| <pre>SE8117T33
 +
1244-LF</pre>
 +
|
 +
* Ethernet: HanRun HR901110A 1247
 +
* Quake 3 crashes and reboots near instantly after rendering the arena when overclocked (Turbo)
 +
* Prone to SD card (SDHC 4 GB Class 4) corruption after a force halt when overclocked (High+)
 +
| [[File:RPi-BH1310-Front_BrianXP7.jpg|100px|thumb|center]]
 +
| [[File:RPi-BH1310-Back_BrianXP7.jpg|100px|thumb|center]]
 +
| Allied Electronics (US)
 +
| [[User:BrianXP7|BrianXP7]]
 +
|-}
 +
 
 +
[[Category:RaspberryPi]]

Latest revision as of 07:57, 11 February 2023

Hardware versions/revisions

Several different boards have been found probably from different assembly lines, and the following table tries to help you identify your board for better troubleshooting. These differences are being debated on raspberrypi.org on this thread [1]

For what we can see for model B boards there are mainly two versions that differ on the type RAM used, Samsung (S) and Hynix (H).


Note: For Board ver. we used: <model><RAM Maker><production date> (ex.: BS1218 is "Model B, Samsung RAM, 18th week of 2012")

Look for the date of manufacturing printed with the year and week (back side, board edge near LAN connector). In this example year (2012) and week (18th):

Date of manufacturing.jpg



Model A:

Board

ver.

RAM

Chip

USB

Chip

C6 F1 / F2

Ref. & Ohm

RG2 Reported issues / Feedback Front Back Distributor Owner
AS1245 Samsung 
225
K4P2G324ED-AGC1
GAC0288J
 N/A 
220
CFP
20N
 N/A 
17-33G
RQB44
  • None
 RS AndrewS


Model B:

Board

ver.

RAM

Chip

USB

Chip

C6 F1 / F2

Ref. & Ohm

RG2 Reported issues / Feedback Front Back Distributor Owner
BS1321 Samsung 
316
K4P4G324EB-AGC1
GKDVBRGCU
 SMSC
LAN9512-JZX
81319-A1B17
3194KPA
CTI-TW
 
220
CFP
3G6
 None/None 
17-33G
RQC18
  • None
RaspberryPi-Board Bv2-Front.jpg
RaspberryPi-Board Bv2-Back.jpg
Farnell / element-14 Otousama
BM1320 Micron 
3DAI8
D9QHN
CZ22
 SMSC
LAN9512-JZX
81319-A1B17
3194KQA
CTI-TW
 
220
CFP
3G6
 None/None 
SE8117T33
1304-LF
  • None
BM1320-Front.JPG
BM1320-Back.JPG
RS V Tom
AS1251 Samsung 
301
K4P4G324EB-AGC1
GKKS23HAU
 SMSC
LAN9512-JZX
81244-A1817
BR1525858
CTI-TW
 
220
CFP
2BD
 None/None 
17-33G
RQB44
  • None
 Farnell / element-14 SiBaz
BS1240 Samsung 
301
K4P4G324EB-AGC1
GKI3619P
 SMSC
LAN9512-JZX
B1231-A1B17
8R151387B
CTI-TW
 
220
CFP
2GO
 None/None 
17-33G
RSB39
  • None
 Farnell / element-14 jwdietrich
BS1215 Samsung SMSC 
220
16V
EEZ
 ?

? / ?

  • None
 Farnell SN
BS1215 Samsung SMSC 
n2
220
UD
 ?

? / ?

  • None
 Farnell SN
BS1215 Samsung 
216
K4P2G324ED-AGC1
GA30419V
 SMSC 
LAN9512-JZX
B1211-A1B17
BR149884A
CTI-TW
 
n2
220C
UD
 14

? / ? 

SE8117733
943-1F
  • None
 Farnell AndrewS
BS1301 Samsung 
301
K4P4G32F4EB-AGC1
GKL438GHU
(512MB version)
 SMSC 
LAN9512-JZX
81244-A1817
BR1525858
CTI-TW
 
220
CFP
28D
 N/A 
17-33G
RQB44
  • None
 Farnell AndrewS
BS1218 Samsung
216
K4P2G324ED-AGC1
GAL0839V
 SMSC
LAN9512-JZX
B1212-A1B17
BR149884S
 
220
16V
EE5
 T014

3.8 / 4.4 

SE8117T33
1213-LF
  • None
RaspberryPi-Board A-Front.JPG
RaspberryPi-Board A-Back.JPG
Farnell marcoalexcampos
BS1218 Samsung
216
K4P2G324ED-AGC1
GAJ0419C
 SMSC
LAN9512-JZX
B1212-A1B17
BR149884S
 
220
16V
EE5
 T014

5.8 / 3.9 

SE8117T33
1213-LF
  • None
Antijn raspi farnell top.jpg
Antijn raspi farnell bot.jpg
Farnell antijn
BS1218 Samsung ? 


?

? / ?







  • None



RaspberryPi-BS1218-Front-JakeBlues.jpg  



RaspberryPi-BS1218-Back-JakeBlues.jpg  


Farnell

JakeBlues





BH1208

Hynix 
H9TKNNN2GDMP
LANDM 149A



SMSC
LAN9512-JZX
B1134-A1B17
8R147769B
STA-SG




220
16V
EE2


14


SE8117T33
1001-LF




  • No issues after getting a good power supply
    • 

  • Note the SMSC is 8R149482C which I suspect is the same for the others.
    • 

  • Ethernet: LU1S041ALF 1018M



RaspberryPi-BS1208-Front-MarkBeckett.JPG  



Error creating thumbnail: File with dimensions greater than 12.5 MP
  


Farnell

MarkBeckett





BH1219

Hynix 
H9TKNNN2GDMP
LANDM 218A



SMSC
LAN9512-JZX
B1206-A1B17
8R149471A
CTI-TW




220
16V
2E2


T014


SE8117T33
1217-LF




  • No issues
    • 

  • Ethernet: HanRun HR901110A 1220



RaspberryPI 1219 RS Pi 1 MCB1.JPG  



RaspberryPI 1219 RS Pi 2 MCB1.JPG  


RS

MarkBeckett




BH1218

Hynix 
H9TKNNN2GDMP
LRNOM 217A


SMSC
LAN9512-JZX
B1215-A1B17
BR1501888



2E
220
16H


14

6.4 / 5.0




SE8117T33
1213-LF




  • USB/Keyboard/LAN issues



Antijn raspi RS top.jpg  



Antijn raspi RS bot.jpg  


RS

antijn




BH1218

Hynix 
H9TKNNN2GDMP
LRNDM 217A


SMSC
LAN9512-JZX
B1215-A1817
BR1494828



2E
220
16H


14

6.1 / 5.6




SE8117T33
1213-LF




  • "I haven't had any issues"[2]
    • 

  • Ethernet HR901110A 1211
    • 

  • E2112RSV1.0B1.1






RS

dukla2000




BS1219

Samsung

SMSC


2E
220
16H



T014

? / ?




SE8117T33
1213-LF




  • None



RaspberryPi-A1219-Front.jpg  



RaspberryPi-A1219-Back.jpg  


Farnell

Troublesome




BH1208

Hynix

SMSC


220
16V
EE2


14

? / ?



?



  • None



Raspberry-pi-top.jpg  



Raspberry-pi-bottom.jpg  


Farnell

selsinork




BH1213

Hynix

SMSC


n2
220c
UD


14

? / ?



<blank>



  • None



RaspberryPi-Board C-Front.jpg  



RaspberryPi-Board C-Back.jpg  


RS






BH1213

Hynix

h9tknnn2c0mp
landm 1494


SMSC

lan9512-jzx
b1134 a1b17 8r14
77698
sta-sg



n2
220c
UD


14

? / ?



<blank>



  • "pretty stable"



RaspberryPi-B1213-Front-RaTTuS.jpg  



RaspberryPi-B1213-Back-RaTTuS.jpg  


Farnell

RaTTuS




BS12xx

Samsung

216 k4p
26324ED
agc1


SMSC

lan9512-jzx 
b1212 a1b17 
br149884b 
cti-tw



220
16V
EE5


?

? / ?







  • OK "has not been stress tested yet"






Farnell

RaTTuS




BH1218

Hynix

h9trnnn2g0mp
lrndm 217a


SMSC

lan9512-jzy
b1215-a1b17
ase-tw



2e
220
16h


14

? / ?




Se8117t33
12-13 cf




  • "stable good runner overclocked to 900mhz"



RaspberryPi-B1218-Front-RaTTuS.jpg  



RaspberryPi-B1218-Back-RaTTuS.jpg  


RS

RaTTuS




BH1218

Hynix

SMSC
LAN9512-JZX
B1215-A1B17
BR150188A
ASE-TW (e3)



2E
220
16H


14

8.2 / 5.9




SE8117T33
1213-LF




  • USB/Keyboard/LAN power down[3]
    • 




RaspberryPi-Board B-Front.JPG  



RaspberryPi-Board B-Back.JPG  


RS

marcoalexcampos




BH1218

Hynix

SMSC


2B
220
16H


?

6-7 / 6-7







  • None






RS

SN




BH1218

Hynix

SMSC


2B
220
16H


?

? / ?







  • None






RS






BH1218

Hynix

SMSC


2E
220
16H


F014

? / ?




SE8117T33
1213-LF




  • None



RaspberryPi-B1218-Front.jpg  



RaspberryPi-B1218-Back.jpg  


RS

Troublesome




BH1218

Hynix 
H9TKNNN2GDMP
LANDM 217A


SMSC

LAN9512-JZX
B1215-A1B17
BR150188B
ASE-TW (e3)



2E
220
16H


14

6.9 / 5.9




SE8117T33
1213-LF




  • None



RPi1T.jpg  



RPi1B.jpg  


RS

Mortimer




BH1218

Hynix 
H9TKNNN2GDMP
LANDM 218A


SMSC

LAN9512-JZX
B1215-A1B17
BR150188A
ASE-TW (e3)



2E
220
16H


14

? / ?




SE8117T33
1213-LF




  • None



RPi2T.jpg  



RPi2B.jpg  


RS

Mortimer




BH1218

Hynix

H9TKNNN2GDMP
LRNOM 217A



SMSC

LAN9512-JZX
B1215-A1B17
8R150188B
ASE-TW (e3)




2E
22-
16H


14

? / ?




SE8117T33
1213-LF




  • D1 shorted when attaching a Neewer HDMI to VGA adapter. The adapter has had no other tests and the raspberry pi's HDMI output has not been connected to any other devices before or since.



RaspberryPi-BH1218-Front-Tom1989.jpg  



RaspberryPi-BH1218-Back-Tom1989.jpg  


RS

Tom1989




BH1208

Hynix 
H9TKNNN2GDMP
LANDM 149A


SMSC

LAN9512-JZX
B1134-A1B17
BR147769B
STA-SG



220
16V
EE2


?

? / ?




SE8117T33
1001-LF




  • Stable, powers up off any charger.  Powers off laptop USB without any issues
    • 

  • Ethernet: LU1S041ALF 1018M






Farnell

Tass




BH1213

Hynix 
H9TKNNN2GDMP
LANDM 149A


SMSC

LAN9512-JZX
B1134-A1B17
BR147769B
STA-SG



n2
220C
UD


?

? / ?




SE8117T33
943-LF




  • Stable, no power issues (not thouroughly tested)
    • 

  • Ethernet: HR901110A 1211|






RS

Tass




BH1218

Hynix 
H9TKNNN2GDMP
LANDM 217A


SMSC

LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)



2E
220
16H


14

14 / 5.1




SE8117T33
1213-LF




  • Up headless with Squeeze and Wheezy for ~six weeks, light duty, no problems
    • 

  • Ethernet: HR901110A 1211



Rpi001F.jpg  



Rpi001R.jpg  


RS

Davidm870




BS1218

Samsung 
216
K42P2G324ED-AGG1
GAL0839T


SMSC

LAN9512-JZX
B1212-A1B17
8R149885A
ASE-TW (e3)



220
16V
EE5


T014

T014 / ?




SE8117T33
1213-LF




  • Comes upp headless with  Wheezy, not tested extensively
    • 

  • Ethernet: HR901110A 1218



Rpi002F.jpg  



Rpi002R.jpg  


Farnell

Davidm870




BS1219

Samsung 
216
K4P2G324ED-AGC1
GAL0859V


SMSC

LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)



2E
220
16H



T014

2.9ohm / 3.0ohm




SE8117T33
0941-LF




  • First had problems (freezing, no LAN, etc.) due to low quality power supply - cheap ebay adaptor. Solved with own  PSU construction with 7805 stabiliser adjusted to 5.25V. Now works OK with Raspbian “wheezy”, but not yet tested extensively.
    • 

  • Ethernet: HR901110A 1220
    • 

  • F3 0.3ohm



RPi-BS1219-Front Pinoccio.jpg  



RPi-BS1219-Back Pinoccio.jpg  


Farnell

Pinoccio




BS1219

Samsung 
216
K4P2G324ED-AGC1
GAL0859D


SMSC

LAN9512-JZX
B1216-A1B17
8R149482C
ASE-TW (e3)



2E
220
16H



T014 / T014

? / ?




SE8117T33
0941-LF




  • No issues
    • 

  • Ethernet: HanRun HR901110A 1220
    • 

  • FN120659744



Error creating thumbnail: File with dimensions greater than 12.5 MP
  



Error creating thumbnail: File with dimensions greater than 12.5 MP
  


Farnell

[SLB] @slabua




BH1222

Hynix 
H9TKNNN2GDMP
LANDM 214A


SMSC

LAN9512-JZX
B1215-A1B17
8R148168E
ASE-TW (e3)



2E
220
16H



T014 / T014

? / ?




SE8117T33
1217-LF




  • No issues
    • 

  • Ethernet: HanRun HR901110A 1225
    • 

  • E2712RSV1.0B1.1



Error creating thumbnail: File with dimensions greater than 12.5 MP
  



Error creating thumbnail: File with dimensions greater than 12.5 MP
  


RS

[SLB] @slabua




BS1224

Samsung 
222
K4P2G324ED-AGC1
GAA0419T


SMSC

LAN9512-JZX
B1222-A1B17
8R150543C
CTI-TW (e3)



2F
220
16H



T014 / T014

? / ?




SE8117T33
1217-LF




  • Ethernet: HanRun HR901110A 1225






Farnell

accumulator




BS1224

Samsung 
222
K4P2G324ED-AGC1
GAA0519H


SMSC

LAN9512-JZX
B1223-A1B17
8R15D81DA
CTI-TW (e3)



2F
220
16H



0000 / 0000

0 / 0




SE8117T33
1220-LF




  • Ethernet: HanRun HR901110A 1225
    • 

  • No Issues
    • 

  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses



RPi-BS1224-Front Shuckle.jpg  




Farnell

shuckle




BS1218

Samsung
216
K4P2G324ED-AGC1
GAL0839R


SMSC
LAN9512-JZX
B1215-A1B17
8R150188B
ASE-TW
(e3)



2E
220
16H



F014

? / ?




SE8117T33
1213-LF




  • None






Farnell

d4lamar




BS1222

Samsung 
225
K4P2G324ED-AGC1
GAC0289E


SMSC

LAN9512-JZX
B1227-A1B17
8R1511968
CTI-TW (e3)



2F
220
16H



0000 / 0000

0 / 0




SE8117T33
1217-LF




  • Ethernet: HanRun HR901110A 1228
    • 

  • Both boards by wcfields ordered at the same time/date.
    • 

  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses






MCM

wcfields




BS1232

Samsung 
225
K4P2G324ED-AGC1
GAC0289H


SMSC

LAN9512-JZX
B1227-A1B17
8R151261A
CTI-TW (e3)



2F
220
16H



0000 / 0000

0 / 0




SE8117T33
1225-LF




  • Ethernet: HanRun HR901110A 1228
    • 

  • Both boards by wcfields ordered at the same time/date.
    • 

  • Note: F1 and F2 are black 0 ohm resistors instead of green polyfuses






MCM

wcfields




BS1228

Samsung 
234
K4P2G324ED-AGC1
GAK1229X


SMSC

LAN9512-JZX
B1228-A1B17
8R151303B
CTI-TW (e3)



2E
220
16H


0000 / 0000

? / ?




SE8117T33
1220-LF




  • Serious problems with the 4GB SDHC-Card ordered with the board on initial testing with Gentoo (corrupted FS)
    • 

  • Same issues using rasbian and two different supported SD cards
    • 

  • Using RS original power adapter






RC

FKlama




BS1233

Samsung 
231
K4P4G324EB-AGC1
GKG0609V
(512MB version)


SMSC

LAN9512-JZX
B1227-A1B17
8R151261A
CTI-TW (e3)



2E
220
CFP
2G6


None / None

? / ?




17-33G
RRB32 (ON)




  • Ethernet Jack: No visible branding
    • 

  • PS: 500mA Mobile phone charger & USB Port on Laptop and Desktop (These are all I had). Works with blackberry 8520 550mA charger.
    • 

  • Fuse(s): ONLY seems to have green polyswitch (F3) on bottom side of board F1 and F2 don't exist
    • 

  • In the position of the (other fuses) there is a mounting hole, likewise there is also a mounting hole under the Raspberry Pi Logo.


  • There is also an extra header (P5) defined on the bottom side of the PCB near P1 (which is on the top side)
    • 

  • Won't boot with a known working (This same card will boot on BS1215 ) Kingston 4GB Class 4 SD Card, Raspbian "wheezy" 2012-09-18.
    • 

  • When using raspbmc powered with 550ma blackberry 8520 charger, keyboard and mouse disconnects frequently also external hard drive unmounts frequently.
    • 

  • When using torrents and connected with usb wireless adapter (tested with Netgear WNA1000M), when torrent picks up speed, raspbian becomes unstable. Same works well over Ethernet.
    • 

  • The unit WILL boot from the SD card bought from Element 14.
    • 

  • Will add more when I know more.






Farnell/Element14 (AU)

TheSteveB




BS1236

Samsung 
225
K4P46324EB-AGC1
GKEM509X
(512MB version)


SMSC

LAN9512-JZX
B1232-A1B17
8R151680A
CTI-TW (e3)



2F
220
16H


None / None

? / ?




SE8117T33
1225-LF









RS

Yaron




BS1238

Samsung 
225
K4P4G324EB-AGC1
GKFX1390
(512MB version)


SMSC

LAN9512-JZX
B1232-A1B17
8R151549A
CTI-TW (e3)



2H
220
16H


None / None

? / ?




SE8117T33
1225-LF




  • Ethernet Jack: HanRun HR901110A 1230
    • 

  • With extra header P5, missing fuses F1 and F2, and with mounting holes just like BS1233
    • 

  • Weird stability problems. Can build Quake3, and can play it for a little while, but eventually locks up (black screen, loses ethernet link). Putting it in the Adafruit case seems to exacerbate the problem.
    • 

  • Highest temp measured by vcgencmd measure_temp is 53.5C. Last measured temp before lockup was 53.0C
    • 

  • Problem occurs with both the Adafruit power supply as well as my Nexus 7 2A supply.
    • 

  • Tested with at least 3 different Micro-USB cables.
    • 

  • Tested with the 4GB Dane-Elec Class 4 MicroSD card from Adafruit, as well as an 8GB Class 10 SanDisk full-size SD card.
    • 

  • Voltages:

    • Idle, with HDMI only

      • 5.06V (polyfuse in)
        • 

      • 4.82V (polyfuse out)
      • 

    • Idle, with HDMI, keyboard and mouse

      • 5.04V (polyfuse in)
        • 

      • 4.77V (polyfuse out)
      • 

    • Running Quake (with HDMI, keyboard, mouse, and network)

      • 4.98V (polyfuse in)
        • 

      • 4.55V (polyfuse out)






Adafruit (US)

Balefrost




BH1310

Hynix 
H9TKNNN4GDMP
LRNDM 305A


SMSC

LAN9512-JZX
81303-A1B17
3032AWA
CTI-TW



L2
220
16H


N/A


SE8117T33
1244-LF




  • Ethernet: HanRun HR901110A 1247
    • 

  • Quake 3 crashes and reboots near instantly after rendering the arena when overclocked (Turbo)
    • 

  • Prone to SD card (SDHC 4 GB Class 4) corruption after a force halt when overclocked (High+)



RPi-BH1310-Front BrianXP7.jpg  



RPi-BH1310-Back BrianXP7.jpg  


Allied Electronics (US)

BrianXP7











					

						Retrieved from "https://elinux.org/index.php?title=RaspberryPi_Boards&oldid=572536"