Difference between revisions of "RaspberryPi Laptop"

From eLinux.org
Jump to: navigation, search
(Updates)
(Updates)
Line 1: Line 1:
 
===Updates===
 
===Updates===
 +
May 5, 2012 - 90% Parts ordered!
 +
90% of parts have been ordered! This includes keyboards,SD Card extenders, Touchpads, Battery, USB Hub, etc.
 +
 
May 4, 2012 - Website created!  
 
May 4, 2012 - Website created!  
 
http://raspberrypilaptop.tk
 
http://raspberrypilaptop.tk
Site is down while the domain name changes... 24 hours wait...
+
 
  
 
May 3, 2012 - Yup! Our first update! We originally thought that we needed to get a loan to get the project going or go to kickstarter (After Finished Prototype) ,But It turns out that somebody has volunteered to be a potential investor if the prototype works! Thanks to Raiyan Memon for volunteering! You will not be dissapointed!
 
May 3, 2012 - Yup! Our first update! We originally thought that we needed to get a loan to get the project going or go to kickstarter (After Finished Prototype) ,But It turns out that somebody has volunteered to be a potential investor if the prototype works! Thanks to Raiyan Memon for volunteering! You will not be dissapointed!

Revision as of 14:09, 5 May 2012

Updates

May 5, 2012 - 90% Parts ordered! 90% of parts have been ordered! This includes keyboards,SD Card extenders, Touchpads, Battery, USB Hub, etc.

May 4, 2012 - Website created! http://raspberrypilaptop.tk


May 3, 2012 - Yup! Our first update! We originally thought that we needed to get a loan to get the project going or go to kickstarter (After Finished Prototype) ,But It turns out that somebody has volunteered to be a potential investor if the prototype works! Thanks to Raiyan Memon for volunteering! You will not be dissapointed!

Suggestions! Leave suggestions here!

Suggestions from Gus3:

  • multiple system options (Debian, Arch, Fedora, Bodhi, perhaps others, perhaps non-Linux)
  • send a stated percentage back to the Raspberry Pi Foundation

(Good ideas! I will talk to the others about them!-hackery21, to Gus3)