Difference between revisions of "TUSB2046B"
Line 32: | Line 32: | ||
[http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=764078 Jameco Part Lookup] | [http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=764078 Jameco Part Lookup] | ||
+ | |||
+ | [http://www.instructables.com/id/EEXHOBCAOEEUR4U24X/ Custom Hub Project using a TUSB2046] |
Revision as of 19:51, 12 September 2007
TUSB2046B is a RoHS Compliant single chip 4-Port USB Hub from Texas Instruments
* Fully Compliant With the USB Specificationas a Full-Speed Hub: TID #30220231 * 32-Terminal LQFP Package With a 0.8-mm Terminal Pitch or QFN Package with a 0.5-mm Terminal Pitch(1) * 3.3-V Low Power ASIC Logic * Integrated USB Transceivers * State Machine Implementation Requires No Firmware Programming * One Upstream Port and Four Downstream Ports * All Downstream Ports Support Full-Speed and Low-Speed Operations * Two Power Source Modes * Self-Powered Mode * Bus-Powered Mode * Power Switching and Overcurrent Reporting Is Provided Ganged or Per Port * Supports Suspend and Resume Operations * Supports Programmable Vendor ID and Product ID With External Serial EEPROM * 3-State EEPROM Interface Allows EEPROM Sharing * Push-Pull Outputs for PWRON Eliminate the Need for External Pullup Resistors * Noise Filtering on OVRCUR Provides Immunity to Voltage Spikes * Package Pinout Allows 2-Layer PCB * Low EMI Emission Achieved by a 6-MHz Crystal Input * Migrated From Proven TUSB2040 Hub * Lower Cost Than the TUSB2040 Hub * Enhanced System ESD Performance * Supports 6-MHz Operation Through a Crystal Input or a 48-MHz Input Clock