Difference between revisions of "Tadpole Lure"

From eLinux.org
Jump to: navigation, search
(R4/R5/R6 4.7K Ohm Resistors)
(RGB LED)
Line 82: Line 82:
 
[[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]]
 
[[File:Tadpole-led-aligned.jpg|220px|right|RGB LED Alignment]]
 
[[File:Tadpole-led.jpg|220px|right|RGB LED]]
 
[[File:Tadpole-led.jpg|220px|right|RGB LED]]
 +
The single RGB LED in the kit is mounted with the longest lead as the second hold from the side with a flat edge. The LED package has a flat side. The flat side is matched up with the white line marking on the PCB.
 
<br>
 
<br>
 
<br>
 
<br>
Line 93: Line 94:
 
<br>
 
<br>
 
<br>
 
<br>
 +
 
== Transistors ==
 
== Transistors ==
 
[[File:Tadpole-transistors.jpg|220px|right|Transistors]]
 
[[File:Tadpole-transistors.jpg|220px|right|Transistors]]

Revision as of 15:28, 24 March 2015

Tadpole Lure on MinnowBoard Max

Description

The Tadpole Lure is a low cost "Micro-Lure" design that providing a single RGB LED and a breakout/prototype area.

Components

Tadpole Components










Design Files



Assembly

Getting Started

Getting Started









R1 12 Ohm Resistor

12 Ohm Resistor

There is a single resistor with the color code BROWN-RED-BLACK. This one is used for the resistor position marked R1.







R2/R3 68 Ohm Resistors

68 Ohm Resistors

There are two resistors with the color code BLUE-GREY-BLACK. These are used for resistor positions marked R2 and R3.







R4/R5/R6 4.7K Ohm Resistors

4.7K Ohm Resistors

There are three resistors with the color code YELLOW-VIOLET-RED. These are used for the resistor positions marked R4, R4 and R5.







RGB LED

RGB LED Alignment
RGB LED

The single RGB LED in the kit is mounted with the longest lead as the second hold from the side with a flat edge. The LED package has a flat side. The flat side is matched up with the white line marking on the PCB.










Transistors

Transistors









Connector

Connector









Completed

Completed