View source for Talk:Jetson/Jetson TK1 Power

From eLinux.org
Jump to: navigation, search

Contents

Thread titleRepliesLast modified
4.1: How to connect battery?122:06, 28 July 2014

4.1: How to connect battery?

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

 

Return to Thread:Talk:Jetson/Jetson TK1 Power/4.1: How to connect battery?.

As mentioned on this page, you can use a 3S LiPo battery to power the Jetson TK1 directly, so for example, you could cut off the connector on your LiPo battery pack and attach a standard 2.1mm DC power barrel connector (available from any Radio Shack or Fry's or online "http://www.pololu.com/product/2448", etc). But I forgot to mention on the page that the center-pin is positive and the outer ring is negative. (I've added it just now, thanks!). If you think the current Wiki page does not explain this properly then feel free to tell me how it should be explained and I'll consider updating the instructions.

shervin.emami (talk)22:06, 28 July 2014