Difference between revisions of "Template:CompileOpenOCDFedoraGit"
(Updating section for Fedora) |
(Adding a noinclude and includeonly to categorize the template properly.) |
||
(7 intermediate revisions by the same user not shown) | |||
Line 19: | Line 19: | ||
You will need to install several packages to compile and run [[OpenOCD]]. Open a terminal window ('''Applications menu > Terminal Emulator''') and type: | You will need to install several packages to compile and run [[OpenOCD]]. Open a terminal window ('''Applications menu > Terminal Emulator''') and type: | ||
− | sudo yum install libtool autoconf texinfo libusb-dev | + | sudo yum install git libtool autoconf texinfo libusb-dev |
If you prefer to compile libusb yourself, you can find the source at http://sourceforge.net/projects/libusb/files/libusb-1.0/. | If you prefer to compile libusb yourself, you can find the source at http://sourceforge.net/projects/libusb/files/libusb-1.0/. | ||
Line 25: | Line 25: | ||
==Downloading and Compiling libFTDI== | ==Downloading and Compiling libFTDI== | ||
− | libFTDI is an open source library that enables you to talk to FTDI chips like: FT232BM, FT245BM, FT245R, FT2232C, FT2232D and FT2232H. You will need libFTDI to compile [[OpenOCD]] | + | libFTDI is an open source library that enables you to talk to FTDI chips like: FT232BM, FT245BM, FT245R, FT2232C, FT2232D and FT2232H. You will need libFTDI to compile [[OpenOCD]]. |
− | |||
− | |||
− | + | Fedora 17 provides libftdi-0.19. To install: | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | $ sudo yum install libftdi | ||
==Downloading OpenOCD== | ==Downloading OpenOCD== | ||
Line 58: | Line 36: | ||
cd ~ | cd ~ | ||
− | git clone git:// | + | git clone git://git.code.sf.net/p/openocd/code |
There should now be a folder in your home directory called '''openocd/.''' | There should now be a folder in your home directory called '''openocd/.''' | ||
− | |||
==Compiling OpenOCD== | ==Compiling OpenOCD== | ||
Line 68: | Line 45: | ||
cd ~/openocd | cd ~/openocd | ||
− | + | ./bootstrap | |
− | + | ./configure --enable-maintainer-mode --disable-werror --enable-ftdi | |
− | + | make | |
+ | |||
+ | At this point you can continue and do: | ||
+ | |||
sudo make install | sudo make install | ||
+ | |||
+ | I personally prefer not to do this, as I prefer to copy the openocd binary and supporting files to a /bin directory within my home directory. This is described below. | ||
Navigate to '''/home/USERNAME/openocd/src''' to find the '''openocd''' binary. You will need superuser privileges (the ''sudo'' command) to run [[OpenOCD]]. | Navigate to '''/home/USERNAME/openocd/src''' to find the '''openocd''' binary. You will need superuser privileges (the ''sudo'' command) to run [[OpenOCD]]. | ||
− | |||
− | |||
==Preparing to Run OpenOCD== | ==Preparing to Run OpenOCD== | ||
Line 87: | Line 67: | ||
cd ~/openocd/tcl | cd ~/openocd/tcl | ||
cp -r * ~/openocd-bin | cp -r * ~/openocd-bin | ||
− | cd | + | cd ../src |
cp openocd ~/openocd-bin | cp openocd ~/openocd-bin | ||
Line 105: | Line 85: | ||
mmr_helpers.tcl | mmr_helpers.tcl | ||
+ | ===Set udev rules to allow non-root running of OpenOCD=== | ||
+ | |||
+ | $cd /etc/udev/rules.d | ||
+ | $sudo vim 45-flyswatter2.rules | ||
+ | Paste the following lines: | ||
+ | SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ | ||
+ | ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", GROUP="wheel", MODE="0666" | ||
+ | |||
+ | NOTE that I used the wheel group, as I know my user is a member. You can also omit the GROUP variable and add OWNER="<username>" where <username> is your username. | ||
+ | |||
+ | Be sure to unplug you Flyswatter2 from your PC at this point, before reloading the udev rules as changes only apply to new events. | ||
+ | |||
+ | $sudo udevadm control --reload | ||
+ | |||
+ | Now plug your Flyswatter2 back in and proceed to running OpenOCD as a non-root user. | ||
You can now run [[OpenOCD]] from '''/home/USERNAME/openocd-bin'''. To get started running OpenOCD, see [[Running OpenOCD on Linux]]. | You can now run [[OpenOCD]] from '''/home/USERNAME/openocd-bin'''. To get started running OpenOCD, see [[Running OpenOCD on Linux]]. | ||
− | [[Category:TinCanTools]] | + | <includeonly>[[Category:TinCanTools]]</includeonly> |
− | [[Category:OpenOCD]] | + | <includeonly>[[Category:OpenOCD]]</includeonly> |
− | [[Category:Fedora]] | + | <includeonly>[[Category:Fedora]]</includeonly> |
+ | <noinclude>[[Category:OpenOCD Templates]]</noinclude> |
Latest revision as of 18:25, 21 May 2013
This guide will compile OpenOCD {{{3}}} for Fedora 17 with the {{{{{2}}}_NAME_CAPS}} driver library, for use with the TinCanTools Flyswatter and Flyswatter2. Version {{{3}}} is the version of OpenOCD currently in development. For instructions on compiling with the most recent release code, see Compiling OpenOCD Linux.
Contents
OpenOCD 0.6.0 vs the 0.5.0 Release
This guide uses the most recent version of the OpenOCD source currently in development. Unlike the 0.5.0 release the development version includes support for the Flyswatter2, so you won't need to download or apply a patch before compiling. However, the development code is subject to change at any time. If you encounter problems with this option, try the OpenOCD 0.5.0 instructions in Compiling OpenOCD Linux instead.
Installing Packages
You will need to install several packages to compile and run OpenOCD. Open a terminal window (Applications menu > Terminal Emulator) and type:
sudo yum install git libtool autoconf texinfo libusb-dev
If you prefer to compile libusb yourself, you can find the source at http://sourceforge.net/projects/libusb/files/libusb-1.0/.
Downloading and Compiling libFTDI
libFTDI is an open source library that enables you to talk to FTDI chips like: FT232BM, FT245BM, FT245R, FT2232C, FT2232D and FT2232H. You will need libFTDI to compile OpenOCD.
Fedora 17 provides libftdi-0.19. To install:
$ sudo yum install libftdi
Downloading OpenOCD
Git is version control software distributed with Fedora. You can use git to download the current development code from the OpenOCD git repository at sourceforge.net. In the terminal window, navigate to your home directory and make sure you don't already have a directory there named openocd/. (Downloading with git will create a directory called openocd/ containing the OpenOCD source. If you already have a directory called openocd/ either rename it or navigate to a different directory before you proceed.) Then download OpenOCD with the following command:
cd ~ git clone git://git.code.sf.net/p/openocd/code
There should now be a folder in your home directory called openocd/.
Compiling OpenOCD
In the terminal window, navigate to the new folder containing the OpenOCD source and compile as follows.
cd ~/openocd ./bootstrap ./configure --enable-maintainer-mode --disable-werror --enable-ftdi make
At this point you can continue and do:
sudo make install
I personally prefer not to do this, as I prefer to copy the openocd binary and supporting files to a /bin directory within my home directory. This is described below.
Navigate to /home/USERNAME/openocd/src to find the openocd binary. You will need superuser privileges (the sudo command) to run OpenOCD.
Preparing to Run OpenOCD
You can run openocd from /home/USERNAME/openocd/src, but you may encounter problems with configuration files. For a more in-depth discussion of these issues, see OpenOCD Config File Paths. This guide recommends that you create a new directory containing OpenOCD and its config files.
Create a new directory in /home/USERNAME called openocd-bin, and copy the openocd binary and the contents of /home/USERNAME/openocd/tcl to the new directory. You can do this from the terminal window with the collowing commands:
cd ~ mkdir openocd-bin cd ~/openocd/tcl cp -r * ~/openocd-bin cd ../src cp openocd ~/openocd-bin
openocd-bin should now contain the following files and subdirectories:
board chip cpld cpu openocd interface target test bitsbytes.tcl mem_helper.tcl memory.tcl mmr_helpers.tcl
Set udev rules to allow non-root running of OpenOCD
$cd /etc/udev/rules.d $sudo vim 45-flyswatter2.rules
Paste the following lines:
SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", GROUP="wheel", MODE="0666"
NOTE that I used the wheel group, as I know my user is a member. You can also omit the GROUP variable and add OWNER="<username>" where <username> is your username.
Be sure to unplug you Flyswatter2 from your PC at this point, before reloading the udev rules as changes only apply to new events.
$sudo udevadm control --reload
Now plug your Flyswatter2 back in and proceed to running OpenOCD as a non-root user. You can now run OpenOCD from /home/USERNAME/openocd-bin. To get started running OpenOCD, see Running OpenOCD on Linux.