NVIDIA TensorRT™ is a platform for high-performance deep learning inference. It includes a deep learning inference optimizer and runtime that delivers low latency and high-throughput for deep learning inference applications. TensorRT-based applications perform up to 40x faster than CPU-only platforms during inference. With TensorRT, you can optimize neural network models trained in all major frameworks, calibrate for lower precision with high accuracy, and finally deploy to hyperscale data centers, embedded, or automotive product platforms.
- 1 Introduction
- 2 FAQ
- 2.1 1. How to check TensorRT version?
- 2.2 2. Whether TRT support thread-safe?
- 2.3 3. Can INT8 calibration table be compatible among different TRT version or HW platform?
- 2.4 4. How to check GPU utilization?
- 2.5 5. What is kernel auto-tuning?
- 2.6 6. How TensorRT behave when different batch size is being used?
- 2.7 7. What is maxWorkspaceSize?
- 2.8 8. What is the difference between enqueue() and execute()?
- 2.9 9. How to dump the output of certain layer?
- 2.10 10. How to analyze network performance?
- 2.11 11. How to optimize network performance?
- 2.12 12. How to fix the error “Could not find scales for tensor xxxx” for INT8 mode?
- 2.13 13. How to enable VERBOSE log?
- 2.14 14. How to fix INT8 accuracy issue?
1. How to check TensorRT version?
There are two methods to check TensorRT version,
- Symbols from library
$ nm -D /usr/lib//aarch64-linux-gnu/libnvinfer.so | grep "tensorrt" 0000000007849eb0 B tensorrt_build_svc_tensorrt_20181028_25152976 0000000007849eb4 B tensorrt_version_5_0_3_2
NOTE: 20181028 is the build date and 25152976 is the top changelist and 5_0_3_2 is the version information.
- Macros from header file
$ cat /usr/include/aarch64-linux-gnu/NvInfer.h | grep "define NV_TENSORRT" #define NV_TENSORRT_MAJOR 5 //!< TensorRT major version. #define NV_TENSORRT_MINOR 0 //!< TensorRT minor version. #define NV_TENSORRT_PATCH 3 //!< TensorRT patch version. #define NV_TENSORRT_BUILD 2 //!< TensorRT build number. #define NV_TENSORRT_SONAME_MAJOR 5 //!< Shared object library major version number. #define NV_TENSORRT_SONAME_MINOR 0 //!< Shared object library minor version number. #define NV_TENSORRT_SONAME_PATCH 3 //!< Shared object library patch version number.
2. Whether TRT support thread-safe?
TensorRT runtime is thread-safe in the sense that parallel threads using different TRT Execution Contexts can execute in parallel without interference.
3. Can INT8 calibration table be compatible among different TRT version or HW platform?
INT8 calibration table is absolutely NOT compatible between different TRT versions. This is because the optimized network graph is probably different among various TRT versions. If you enforce to use them, TRT may not find the corresponding scaling factor for given tensor.
As long as the installed TensorRT version is identical for different HW platforms, then the INT8 calibration table can be compatible. That means you can perform INT8 calibration on a faster computation platform, like V100 or P4 and then deploy the calibration table to Tegra for INT8 inferencing.
4. How to check GPU utilization?
On Tegra platform, we can use tegrastats to achieve that,
$ sudo /home/nvidia/tegrastats
On Desktop platform, like Tesla, we can use nvidia-smi to achieve that,
$ nvidia-smi --format=csv -lms 500 --query-gpu=index,timestamp,utilization.gpu,clocks.current.graphics,clocks.current.sm,clocks.current.video,clocks.current.memory,utilization.memory,memory.total,memory.free,memory.used,power.limit,power.draw,temperature.gpu,fan.speed,compute_mode,gpu_operation_mode.current,clocks_throttle_reasons.active,pstate,clocks_throttle_reasons.hw_slowdown,clocks_throttle_reasons.gpu_idle,clocks_throttle_reasons.applications_clocks_setting,clocks_throttle_reasons.sw_power_cap,clocks_throttle_reasons.sync_boost -i 0 | tee log.cs
5. What is kernel auto-tuning?
TensorRT contains various kernel implementations, including those existing in CUDNN and CUBLAS, to accommodate diverse neural network configurations (batch, input/output dims, filters, strides, pads, dilation rate and etc). During network building, TensorRT will profile all suitable kernels and find out the best one with the smallest latency, and then mark it as the final tactic to run the certain layer. We call this process as kernel auto-tuning.
Additionally, it’s not always true that INT8 kernel faster than FP16’s than FP32’s, so
- if you run FP16 precision mode, it profiles all candidates in FP16 kernel pool and FP32 kernel pool.
- if you run INT8 precision mode, it profiles all candidates in INT8 kernel pool and FP32 kernel pool.
- if both FP16 and INT8 are enabled (we call it hybrid mode), it profiles all candidate in INT8 kernel pool, FP16 kernel pool and FP32 kernel pool.
If current layer chooses different mode as its bottom layer or top layer, TensorRT will insert a reformatting layer between them to do the tensor format conversion, and the time for this reformatting layer will be taken into account as the cost of current layer during auto-tuning.
6. How TensorRT behave when different batch size is being used?
For relatively deep network, if GPU is fully occupied, we couldn't obtain much performance gain from batching.
For relatively simper network, generally, GPU is not fully loaded, then we could obtain performance gain from batching.
In other words, inference time per frame can be improved with the bigger batch size only if GPU loading is not full.
7. What is maxWorkspaceSize?
maxWorkspaceSize indicates a threshold to filter the kernels/tactics of which desired workspace size is less than maxWorkspaceSize. In other words, if the workspace size a tactic requires(such as for convolution, we can use cudnnGetConvolutionForwardWorkspaceSize() to get the needed workspace size) is larger than what we specify to maxWorkspaceSize, then this tactic will be ignored during kernel auto-tuning.
NOTE: the final device memory TRT consumes has nothing to do with maxWorkspacesize.
8. What is the difference between enqueue() and execute()?
- Enqueue will need user to create and synchronize cudaStream_t. When it's being invoked, it will return immediately. While with Execute, TensorRT will create/synchronize steam internally, so it will return until everything is completed.
- Enqueue and Execute are the functions with respect to the whole network/cudaEngine, other than specific layer. There is no enqueue inference in layer's implementation, so Layer only has execute interface, including the IPlugin layer.
- Both enqueue and execute support profiling now. The time consumption of each layer will be printed when the whole execution is done, other than real-time profiling.
- setDebugSync is only supported by execute. If this flag is true, the builder will synchronize (cudaDeviceSynchronize) after timing each layer and report the layer name.
9. How to dump the output of certain layer?
TensorRT doesn’t store the intermediate result of your network, so you have to use the following API to mark the intended layer as output layer, and then interference again and save its result for further analysis,
- You can set multiplier layers as the output at the same time, but setting the layer as output may break the network optimization and impact the inference performance, as TensorRT always runs output layer in FP32 mode, no matter which mode you have configured.
- Don’t forget to adjust the dimension or output buffer size after you change the output layer.
10. How to analyze network performance?
First of all, we should be aware of the profiling command tool that TensorRT provides - trtexec.
If all your network layer has been supported by TensorRT through either native way or plugin way, you can always utilize this tool to profile your network very quickly.
Second, you can add profiling metrics for your application manually from CPU side (link) or GPU side (link).
- Time collection should only contain the network enqueue() or execute() and any context set-up or memory initialization or refill operation should be excluded.
- Add more iterations for the time collection, in order to avagage the GPU warm-up effect.
Third, if you would like to scope the time consumption of each layer, you can implement IProfiler to achieve that, or utilize SimpleProfiler TensorRT already provides (refer to below patch for sampleSSD),
--- sampleSSD.cpp.orig 2019-05-27 12:39:14.193521455 +0800 +++ sampleSSD.cpp 2019-05-27 12:38:59.393358775 +0800 @@ -428,8 +428,11 @@ float* detectionOut = new float[N * kKEEP_TOPK * 7]; int* keepCount = new int[N]; + SimpleProfiler profiler (" layer time"); + context->setProfiler(&profiler); // Run inference doInference(*context, data, detectionOut, keepCount, N); + std::cout << profiler; bool pass = true;
11. How to optimize network performance?
When you start optimizing your network performance, please ensure the methodology you use to profile your network is convincing (refer to question #12).
We strongly recommend you to run your network in multi-batch mode, so that GPU computation resource can be fully exhausted. It’s always true to see a better performance when inferencing through multi-batch mode, unless your network is deeper or complicated enough to get GPU drained.
- Lower precision mode
TensorRT supports inferencing in FP16 or INT8 mode. Generally, the speed will become faster from FP32 to FP16 to INT8.
For FP16, it’s very simple to enable it.
For INT8, if you don’t care about the correctness or accuracy during network evaluation, you can simply use dummy dynamic range to get the network running in INT8,
NOTE: if you finally decide to choose INT8 as the deployment mode, you have to implement the ICalibrator or set proper dynamic range for your network.
If you find the performance for INT8 or FP16 is not significantly improved, don't panic, let’s break down the issue step by step,
- Dump the per layer time and compare it between FP32 and FP16 or INT8.
- Figure out which layer takes the bigger or most time consumption. If it’s FC layers, you probably need to enable hybrid mode (enable both FP16 and INT8),
// or samplesCommon::setAllTensorScales(network.get())
- If your network has many plugin layers or those plugin layer interlace through the whole network, TensorRT will insert many reformat layers to convert the data layout between normal layer and plugin layer. This reformat layer can be eliminated in some cases, for example, the network with PReLU (which can’t be supported by TensorRT 5.1 or prior versions). After the network training done, the slope parameter of PReLU can be converted to the hyperparameter negative slope of LeakyReLU (which can be native supported by TensorRT).
- Generally, the speedup for lower precision mode mainly comes from convolution layer, if the total time of convolution layer takes a little part of your network inferencing time, it’s expected that lower precision FP16 or INT8 can’t help the network performance a lot. In this case, you should consider how to optimize those non-convolution layer or feed back to NVIDIA for any potential advice.
- Network pruning
This is beyond what TensorRT could help, but this approach should be in mind also for network optimization, like network pruning way provided in NVIDIA TLT.
Standing on GPU HW perspective, there are also some tricks when we design or prune the networks, for example, Tensor core on T4 or Xavier will be more friendly to these convolution cases of which channels are multiplier of 32 or 64. Hence this should give you a sense when you design or prune your feature extraction layers.
12. How to fix the error “Could not find scales for tensor xxxx” for INT8 mode?
Generally, after INT8 calibration is done, Int8Calibrator will save the scaling factors into a local file (through API writeCalibrationCache), so that it wouldn’t need to do calibration again for subsequent running and load the cached calibration table directly (through API readCalibrationCache).
If you change the network or update the network or run the network among different GPU platforms or different TensorRT versions, then you may probably get the error “Could not find scales for tensor xxxx”, that indicates builder couldn’t find corresponding scaling factor from local cached calibration table. It’s intended since the network graph after fusion would change among different GPU platform or different TensorRT version or modification to network itself. The solution is very simple that removes the local calibration table and does calibration again.
13. How to enable VERBOSE log?
You can enable VERBOSE log for your sample through the following API,
It’s always recommended to provide VERBOSE log to NVIDIA for further assistance or help.
14. How to fix INT8 accuracy issue?
Basically, you should be able to get an absolutely correct result for FP32 mode and roughly correct result for INT8 mode after calibration. Otherwise, if FP32 result is as expected, while INT8 result is totally messing, it’s probably due to the incorrect calibration.
The IInt8Calibrator contains four virtual methods need to be implemented, as shown below, the most important and problematic one is getBatch(),
virtual int getBatchSize() const = 0; virtual bool getBatch(void* bindings, const char* names, int nbBindings) = 0; virtual const void* readCalibrationCache(std::size_t& length) = 0; virtual void writeCalibrationCache(const void* ptr, std::size_t length) = 0;
- Is the calibration input after preprocessing identical or not with the preprocessing of FP32 inferencing? If you are not sure about it, just compare the buff before feeding into TensorRT.
- Is the calibration dataset enough or not? Ensure the calibration dataset is diverse and representative.
- Is there any cached and incorrect calibration table being used or not?
After you get a roughly correct result for INT8 mode, you can start evaluating its accuracy against the whole test dataset. If you get a poor classification or detection accuracy as opposed to FP32 mode (Q: which case can be treated as ‘poor’ result, for example, we are seeing within 1% INT8 accuracy loss for popular classification CNNs, like AlexNet, VGG19, Resnet50/101/152 and detection network, like VGG16_FasterRCNN_500x375, VGG16_SSD_300x300, if your accuracy loss is extremely larger than 1%, it might be the ‘poor’ case.), then we would suggest you to do the following check,
- Whether your network can be running in INT8 mode? Mostly training framework can also run the network in INT8 mode, so you should validate it out of TensorRT’s scope. Only when you ensure your model can be a goden model for INT8, then let’s consider how to deploy it appropriately through TensorRT INT8, otherwise, you can do nothing with TensorRT.
- TensorRT does provide internal quantization way for customers to use. But it’s a post-training quantization way and expose less manipulation for users, so it can’t work for all the network cases. If your model is unluckily to be the case, then you should consider external quantization methodology and insert the dynamic range into TensorRT through the following API,
virtual bool setDynamicRange(float min, float max) = 0;
Additionally, someone might directly compare the value distribution of INT8 and FP32 for certain middle layer and surprisingly find out big discrepancy between them. It’s kind of expected, since TensorRT uses saturation quantization way and there are indeed values overflowed after INT8 computation. Actually, the relative entropy methodology for INT8 is to minimize the loss of information, and retain the final detection or classification accuracy loss. Even if you are seeing big deviation for middle layer activation, after propagation through the whole network, the final accuracy loss would probably decrease just a bit. Hence, it’s not convincing to use the value deviation between INT8 and FP32 to evaluate the INT8 accuracy.