Mini-PCIe: Half vs. Full

Under hardware features / mini-PCIe, there are several links to products which are Full length (50.95mm) expansion cards, and will not directly screw onto the board, since it's mounting holes are for half-length (26.8mm) cards. There does exist 1 adapter/riser that should allow full-length cards, at additional cost. Propose to split adapter list to emphasize which would require an adapter (different sub bullet point). Or perhaps only hyperlink to cards that have been tested and known to work?

Spawnflagger (talk)

shervin.emami (talk)

Thanks Shervin. I will be getting a Jetson TK1 soon, and have also ordered a Syba half-mini PCIe Gigabit NIC (Realtek based). I'll report back to confirm/deny that it works. The full-card to half-slot adapter/riser I mentioned is this MM3U+DB3U (untested).

Spawnflagger (talk)

I created it now at "http://elinux.org/Jetson/mini-PCIe"

shervin.emami (talk)