How to enable SATA I/F

From Talk:R-Car/Boards/H3SK
← Thread:Talk:R-Car/Boards/H3SK/How to enable SATA I/F

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

The action you have requested is limited to users in the group: Users.
You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Subject:

I'm using Starterkit R-CarH3 ES 2.0.
I want to use SATA I/F connected to COM Express on this board.

In order to enable SATA I / F with R-CarH3, I think that MD12 should be set to "1".
Check the circuit diagram, MD12 is connected to CPLD and can not be changed from "0".

Is there a way to enable SATA I/F on R-CarH3?

Return to Thread:Talk:R-Car/Boards/H3SK/How to enable SATA I/F.

Starterkit R-CarH3 ES 2.0 doesn't support SATA I/F.

BTW, For the questions of H3 SK and M3 SK please use the following. https://elinux.org/Talk:R-Car/Boards/Yocto-Gen3

RenesasJa (talk)‎

Thank you for response. Noted with appreciation.

‎

Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/H3SK/How_to_enable_SATA_I/F#How_to_enable_SATA_I.2FF_3771"