Difference between revisions of "Thread:Talk:R-Car/Boards/Kingfisher/Yocto Image for H3ULCB+Kingfisher M04"

From eLinux.org
Jump to: navigation, search
(New thread: Yocto Image for H3ULCB+Kingfisher M04)
 
m
 
Line 1: Line 1:
 
What is the best way to create a Linux Yocto (preferably 3.21) for the H3ULCB+Kingfisher M04 configuration?
 
What is the best way to create a Linux Yocto (preferably 3.21) for the H3ULCB+Kingfisher M04 configuration?
 +
  
 
I tried the build instructions from here, but the image doesn't boot:
 
I tried the build instructions from here, but the image doesn't boot:
Line 5: Line 6:
  
 
During the Kernel startup I get a panic:
 
During the Kernel startup I get a panic:
===============
+
 
 
[    1.531217] loop: module loaded
 
[    1.531217] loop: module loaded
 +
 
[    1.537959] renesas-rpc ee200000.rpc0: using DMA read (dma0chan0)
 
[    1.537959] renesas-rpc ee200000.rpc0: using DMA read (dma0chan0)
 +
 
[    1.544521] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError
 
[    1.544521] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError
 +
 
[    1.552007] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP
 
[    1.552007] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP
===============
+
 
 +
 
 
Full details here:
 
Full details here:
 
http://renesasrulz.com/adas/f/adas---forum-1845141225/15725/boot-failure-on-renesas-h3ulcb-kingfisher-board-based-on-r8a7795-es2-0/51386#51386
 
http://renesasrulz.com/adas/f/adas---forum-1845141225/15725/boot-failure-on-renesas-h3ulcb-kingfisher-board-based-on-r8a7795-es2-0/51386#51386
 +
  
 
How can I build a Image which supports the Kingfisher features (especially 8ch. audio and USB3.0):
 
How can I build a Image which supports the Kingfisher features (especially 8ch. audio and USB3.0):
 
https://elinux.org/R-Car/Boards/Kingfisher#S.2FW_support_status
 
https://elinux.org/R-Car/Boards/Kingfisher#S.2FW_support_status

Latest revision as of 07:05, 26 March 2020

What is the best way to create a Linux Yocto (preferably 3.21) for the H3ULCB+Kingfisher M04 configuration?


I tried the build instructions from here, but the image doesn't boot: https://elinux.org/R-Car/Boards/Kingfisher#Build_image

During the Kernel startup I get a panic:

[ 1.531217] loop: module loaded

[ 1.537959] renesas-rpc ee200000.rpc0: using DMA read (dma0chan0)

[ 1.544521] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError

[ 1.552007] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP


Full details here: http://renesasrulz.com/adas/f/adas---forum-1845141225/15725/boot-failure-on-renesas-h3ulcb-kingfisher-board-based-on-r8a7795-es2-0/51386#51386


How can I build a Image which supports the Kingfisher features (especially 8ch. audio and USB3.0): https://elinux.org/R-Car/Boards/Kingfisher#S.2FW_support_status