AGL7.0 Home screen NOT displayed

Jump to: navigation, search

Hello,

Thank you very much for your reply.

No, there is nothing displayed on the monitor during startup and even after Linux login prompt is shown on serial console which is running on other PC. The monitor says that no signal input.

Thisamatsu (talk)

‎00:51, 15 April 2019

Hi OK, please paste the result of the "printenv" command.

Ygohda (talk)

‎18:46, 15 April 2019

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/Yocto-Gen3/AGL7.0 Home screen NOT displayed/reply (4).

> load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb

This device tree is for the H3 v1.1 SK(RTP0RC7795SKBX0010SA00).

> [ 0.005726] NOTICE: BL2: PRR is R-Car H3 Ver.2.0

According to the above log you are using H3 v2.0 SK.

Please use the "r8a7795-h3ulcb.dtb".

Ygohda (talk)

‎21:40, 15 April 2019

Hello.

Now the home screen is successfully displayed! Thank you so much for your support.

Thisamatsu (talk)

‎23:36, 15 April 2019
 
 
 
 
Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3/AGL7.0_Home_screen_NOT_displayed/reply_(2)#AGL7.0_Home_screen_NOT_displayed_3881"