AGL 6.0.0 booting on R-Car H3 not completed

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/Yocto-Gen3/AGL 6.0.0 booting on R-Car H3 not completed/reply.

> [ 0.005858] NOTICE: BL2: PRR is R-Car H3 Ver1.1 According to this log you are using H3 v1.1.

AGL 6.0.0 is based on Yocto v3.7.0.
And Yocto v3.7.0 doesn't support H3 v1.1 SK. Please refer to the following.
https://elinux.org/R-Car/Boards/H3SK#Limitation

Currently, H3 v2.0 and M3 SK are out of stock. I hope that you already have H3 v2.0 SK or M3 SK.

Ygohda (talk)02:23, 24 October 2018

Thank you for letting me know it.

I found that I'm not happy, but I will find someone who already has H3 v2.0 SK or M3 SK.

15:57, 24 October 2018